vuzero


Wiki source for vuzero


Show raw source

====Vu+ Zero====
==={{color c="gray" text="Flash an image via USB"}}===

1) Format your USB stick with a FAT32 file system
2) Download the USB image of your choice on http://openpli.org/download/vuplus/vuzero/
3) Extract the USB image (it is a .zip archive) on your PC using your favorite unzip tool to the root directory of your USB stick. The result is that you get a directory vuplus and in this directory you find a directory zero in which you find the necessary files.
4) Disconnect all USB flash drives connected to your receiver.
5) Insert the prepared USB stick into the back of your VU+ Zero receiver
6) Switch your VU+ Zero off (power-off, not stand-by!). Or choose restart in your receiver: Menu -> Standby / Restart -> Restart and go directly to step 8
7) Switch your VU+ Zero on
8) The white led will quickly flash two or three times then start to fade in and out slowly.
9) The flashing is done when the led light rapidly blinks on the front panel.
10) Switch the power off and on again to reboot.



Please bear in mind: To flash an image there may be only one USB-device connected with the receiver and that's the USB-device with the image you want to flash. If there are more USB-devices connected the flash procedure will most likely fail and won't even start!
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki