OpenPLi Wiki: Vu+ Zero

Revision history for vuzeo

Revision [15359]

Last edited on 2015-12-26 20:26:21 by Pedro_Newbie [Corrected the next step in case of restart]

Additions:

6) Switch your VU+ Zero off (power-off, not stand-by!). Or choose restart in your receiver: Menu -> Standby / Restart -> Restart and go directly to step 8

Deletions:

~~6) Switch your VU+ Zero off (power-off, not stand-by!). Or choose restart in your receiver: Menu -> Standby / Restart -> Restart and go directly to step 7~~

Revision [15356]

Edited on 2015-12-26 14:52:37 by Pedro_Newbie [correctewd the downloadpath]

Additions:

2) Download the USB image of your choice on http://openpli.org/download/vuplus/vuzero/

Deletions:

~~2) Download the USB image of your choice on http://http://openpli.org/download/vu+/vuzero/~~

Revision [15355]

Edited on 2015-12-26 14:40:56 by 40H3X [correctewd the downloadpath]

Additions:

3) Extract the USB image (it is a .zip archive) on your PC using your favorite unzip tool to the root directory of your USB stick. The result is that you get a directory vuplus and in this directory you find a directory zero in which you find the necessary files.

Deletions:

Revision [15354]

Edited on 2015-12-26 14:39:01 by 40H3X [correctewd the downloadpath]

Additions:

2) Download the USB image of your choice on http://http://openpli.org/download/vu+/vuzero/

Deletions:

~~2) Download the USB image of your choice on http://openpli.org/download/vu+/vuzero/~~

Revision [15353]

Edited on 2015-12-26 14:35:43 by 40H3X [correctewd the downloadpath]

Additions:

5) Insert the prepared USB stick into the back of your VU+ Zero receiver
6) Switch your VU+ Zero off (power-off, not stand-by!). Or choose restart in your receiver: Menu -> Standby / Restart -> Restart and go directly to step 7
7) Switch your VU+ Zero on
8) The white led will quickly flash two or three times then start to fade in and out slowly.
9) The flashing is done when the led light rapidly blinks on the front panel.
10) Switch the power off and on again to reboot.

Deletions:

5. Insert the prepared USB stick into the back of your VU+ Zero receiver
6. Switch your VU+ Zero off (power-off, not stand-by!). Or choose restart in your receiver: Menu -> Standby / Restart -> Restart and go directly to step 7
7. Switch your VU+ Zero on
8. The white led will quickly flash two or three times then start to fade in and out slowly.
9. The flashing is done when the led light rapidly blinks on the front panel.
10. Switch the power off and on again to reboot.

Revision [15352]

Edited on 2015-12-26 14:34:41 by 40H3X [correctewd the downloadpath]

Additions:

Deletions:

3. Extract the USB image (it is a .zip archive) on your PC using your favorite unzip tool to the root directory of your USB stick. The result is that you get a directory vuplus and in this directory you find a directory duo in which you find the necessary files.
4. Disconnect all USB flash drives connected to your receiver.

Revision [15351]

Edited on 2015-12-26 14:34:17 by 40H3X [correctewd the downloadpath]

Additions:

1) Format your USB stick with a FAT32 file system
2) Download the USB image of your choice on http://openpli.org/download/vu+/vuzero/

Deletions:

1. Format your USB stick with a FAT32 file system
2. Download the USB image of your choice on http://openpli.org/download/vu+/vuzero/

Revision [15350]

Edited on 2015-12-26 14:33:34 by 40H3X [correctewd the downloadpath]

Additions:

====Vu+ Zero====
==={{color c="gray" text="Flash an image via USB"}}===

Deletions:

**Vu+ Zero**
Flash an image via USB

Revision [15349]

Edited on 2015-12-26 14:33:01 by 40H3X [correctewd the downloadpath]

Additions:

**Vu+ Zero**

Deletions:

~~Vu+ Zero~~

Revision [15348]

The oldest known version of this page was created on 2015-12-26 14:32:48 by 40H3X [correctewd the downloadpath]