Revision [4677]
This is an old revision of et5x00 made by Tech on 2013-08-07 10:45:48.
USB flash drive (FAT32 formatted)
USB device (E.g. USB memory stick) In the root directory, create a folder et5x00 and copy the following 5 files to that location
Boot.bin
kernel.bin
rootfs.bin
imageversion
noforce (can for automatic Flash in "force" be renamed.)
Plug the USB media into the USB connector on the front or back either. Now power off and power on the power button on the back of the box. After switching on, the box detects when the ET5000 is firmware on the USB media. If the yellow / orange LED lights up, detected the firmware to the box. Press the UP button on the front panel to load the firmware ET5000. If the Green LED with it lights up yellow / orange, then the box leads is by loading the firmware. Please be patient, because it will take a few minutes to complete the upgrade. If the yellow / orange LED goes off loading is complete. The box will restart automatically.
-Note-during the upgrade not unplug or shut down the front panel has three LEDs: red, green, yellow / orange
