OScam


Revision history for OScam


Revision [15337]

Last edited on 2015-11-29 08:53:50 by Tech
Additions:
**httpport = 8081**
Deletions:
**httpport = 16200**


Revision [4643]

Edited on 2012-10-17 12:22:07 by Pr2 [change streamboard.gmc.to to streamboard.tv]
Additions:
======OScam, Open Source softcam======

OScam is a softcam, software to be used to decrypt digital television channels on a settopbox (receiver), as an alternative for a conditional access module (CAM). OScam is, compared with other softcams (CCcam, mgcamd, etc.), open source. Hence, the name Open Source Conditional Access Module (OScam). OScam is based on the not so well known softcam MpCS. The main features of OSCam are next to its softcam capabilities, that it is able to function as a cardserver.

=====OScam information on the web=====

Their is a official website of the developers of OScam:
- [[http://www.streamboard.tv/wbb2/portal.php Click here to go to official developers board.]]
- [[http://www.streamboard.tv/wiki/index.php/OSCam/en Click here to go to official OScam wiki.]]
- [[http://streamboard.tv:8001/timeline Click here to see an overview of the last changes.]]


Cutting edge binaries for the following brands are (available at OScam Download Center):
- mips-tuxbox-oe1.5 = Enigma1 DreamMultiMedia
- mips-tuxbox-oe1.6 = Enigma2 DreamMultiMedia, VU+, ClarkeTech, Xtrend, ...
- mips-tuxbox-oe2.0 = Enigma2 DreamMultiMedia (closed source)
- i386-pc-linux = normal intel linux pc
- x86_64-pc-linux = linux pc with 64 bit or AMD processor
- and many more ...

=====OScam installation=====

OScam is a highly configurable softcam. So a howto can be getting huge if everything is explained.

OScam has different configuration files. It's not possible to say, everybody needs to configure it the same way (like CCcam).
This because we have different hardware, different sat tv providers, and different home networks. So maybe we can give examples.

OpenPLi has six different OScam Plugins available for enigma2 boxes:
- oscam-stable as 1.10 Open Source Softcam (revision 5741)
- oscam-stable-cs as 1.10 Open Source Softcam only as cardserver
- oscam-unstable as 1.10 Open Source Softcam (revision 6089, last 1.10 version)
- oscam-unstable-cs as 1.10 Open Source Softcam only as cardserver
- oscam-experimental as 1.20 Open Source Softcam (latest revision)
- oscam-experimental-cs as 1.20 Open Source Softcam only as cardserver

Users with a M7 Group SECA3 card (the "new" cards of Canal Digitaal, TV Vlaanderen or TéléSAT) are advised to use version 1.20. Because this version is patched for grabbing the right CW's for a SECA2 and SECA3 cards.

These can be installed on your enigma2 OpenPLi box by pressing **Menu** on remote control and navigate to: **Plugins > DownloadPlugins > softcams > oscam-experimental**
for installing the oscam-experimental plugin. The other OScam plugins can be installed on a similar way.

The configuration files are stored in either of one of these directories on the box:
- /etc/tuxbox/config/oscam-stable/
- /etc/tuxbox/config/oscam-unstable/
- /etc/tuxbox/config/oscam-experimental/

**Update:** OScam-experimental is updated with the help of serveral OpenPli forum users. Since say version OSCAM 1.20 build #6458, OScam runs out of the box with Canal Digitaal smartcards. Yeah awesome!

The following four files need to be installed in configuration directories to let OScam function normally:
- oscam.conf
- oscam.server
- oscam.user
- oscam.dvbapi (in some cases)

In the next paragraphs the minimal content of the configuration files are given. With this config you can decrypt channels on your settopbox, if a smartcard is locally available. Further, an example is given to share your local card to another settopbox in your LAN. The cardsharing protocol used is the same as that of CCcam.

This explanation assumes you know how to edit files on your settopbox.

**Further it is assumed, that your settopbox is behind a firewall!**

The [[http://www.streamboard.tv/wiki/OSCam en OScam wiki]] gives a detailed description of all parameters.

====oscam.conf====

**[global]**
**logfile = /tmp/.oscam/oscam.log**
//This is where the log file is written, in case it is enabled.//
**disablelog = 1**
//Log file is disabled, just to make sure your box is not wasting flash space.//
**nice = -1**
//Make sure the program gets enough priority by the processor.//
**saveinithistory = 1**
//Let you see entitlements of cards.//
**dropdups = 1**
//A user is only allowed to login 1 time.//
**lb_mode = 1**
//Fastest card answer first, this means also not sending double ecm request to other cards.//
**lb_save = 120**
//Write after 120 ECM's the statistics to file.//
**lb_savepath = **
//The statistics are saved in /tmp/.oscam/stat.//
**lb_stat_cleanup = 12**
//For home users after 12 hours the stats are cleaned. To make sure your statistics doesn't have bad entries.//

**[monitor]**
**port = 16500**
**nocrypt = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0–172.31.255.255,192.168.0.0-192.168.255.255**
//You are allowed to monitor from localhost, and all LAN with home ip.//
**hideclient_to = 15**
//Hide clients from monitor or webinterface after 15 seconds idleness.//
**monlevel = 4**
**appendchaninfo = 1**
//Change hexadecimal channel number into a channel name.//

**[cccam]**
**port = 12000**
**reshare = 1**
//Only your other local boxes are allowed to access your cards.//
**version = 2.3.0**
//As far as this wiki knows, latest CCcam version is 2.3.0.//

**[dvbapi]**
**enabled = 1**
**au = 1**
//Makes sure your card is updated with emm's.//
**boxtype = dreambox**
**user = dvbapiau**

**[webif]**
**httpport = 16200**
**httprefresh = 30**
//Every 30 seconds a refresh.//
**httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0–172.31.255.255,192.168.0.0-192.168.255.255**
//You are allowed to access the webinterface from localhost, and all LAN with home ip.//
**httphideidleclients = 1**
//Do not show clients/users, who are not requesting ecm's.//

====oscam.server====

**[reader]**
**label = first_internal_reader**
**description = For dreambox lower smartcard slot, for VU+ DUO upper slot**
**protocol = internal**
**device = /dev/sci0**
**detect = cd**
**group = 1**
**emmcache = 1,1,0**
//Makes sure that emm's are cached and written. The emm's are not logged.//
**dropbadcws = 1**
//Do not answer bad cw's.//
**ratelimitecm = 4**
//Only for M7 SECA3 cards (Canal Digitaal, TV Vlaanderen and Telesat), maximum allowable channels to watch are 4 in a certain time period.//
**ratelimitseconds = 11**
//This time period after you can change the 4 requests into 4 different requests. For M7 SECA3 cards, this should vary between 9 and 11 seconds, with 11 seconds as safest choice.//

**[reader]**
**label = second_internal_reader**
**description = For dreambox upper smartcard slot, for VU+ DUO lower slot**
**protocol = internal**
**device = /dev/sci1**
**detect = cd**
**group = 2**
**emmcache = 1,1,0**
**dropbadcws = 1**
**ratelimitecm = 4**
**ratelimitseconds = 11**

If there isn't a second smartcard reader slot, it isn't needed to add. The parts below are shown as examples.

**[reader]**
**label = external_reader**
**description = External reader connected to serial or USB port of box, such as smargo's or mouse**
**protocol = mouse**
**device = /dev/ttyUSB0**
//Example for a smargo or mouse connected to USB port with ftdi_sio kernel driver.//
**detect = cd**
**group = 3**
**emmcache = 1,1,0**
**dropbadcws = 1**
**ratelimitecm = 4**
**ratelimitseconds = 11**

**[reader]**
**label = lan_cccam**
**description = CCcam LAN connection**
**protocol = cccam**
//The corresponding user definition is given in oscam.user paragraph.//
**device = 192.168.0.x,12000**
//Connect to server 192.168.0.x (or your local server box) at port number 12000.//
**user = username**
//Change into the right user name.//
**password = password**
//Change into the right password.//
**group = 4**
**cccversion = 2.3.0**
//Latest known version of CCcam.//
**ccckeepalive = 1**
//Makes sure the server is not disconnected, due to idleness.//

====oscam.user====

**[account]**
**user = dvbapiau**
//Same username as in oscam.conf in the [dvbapi] section.//
**pwd = **
//Line with pwd is needed, but should be set blank.//
**group = 1,2,3,4**
//The user is only allowed to access the readers 1 until 4.//
**uniq = 3**
//Only the last and one instance is allowed of this user.//
**monlevel = 0**
//Monitoring is not allowed with this account.//
**au = 1**
//The settopbox is allowed to send EMM towards the readers, to update the entitlements of the cards.//

**[account]**
**user = usermonitor**
//Account name of the monitor//
**pwd = passwordmonitor**
//Password for the user monitor account.//
**group = 1,2,3,4**
//Allowed groups to monitor/access.//
**uniq = 1**
//Only the one instance is allowed of this user.//

**[account]**
**user = username**
//Change into the right user name.//
**pwd = password**
//Change into the right password.//
**group = 1,2,3,4**
**uniq = 3**
**monlevel = 0**
**au = 1**
**allowedprotocols = cccam**
//It is only allowed to logon with the CCcam protocol.//
**cccmaxhops = 1**
//The user is only allowed to get ecm from local readers and readers connected to boxes in your lan (1 hop away).//

====oscam.dvbapi====

In this paragraph two version of oscam.dvbapi are given. The first should be used with version less than revision 6421, denoted as version 1.10. The other, denoted as version 1.20, can be used for revisions from 6421.

===oscam.dvbapi version 1.20===

Can be kept empty, due to code changes that can handle multicrypt on channels with SECA2 and SECA3 encryption.

===oscam.dvbapi version 1.10 for a SECA3 Canal Digital card===

P: 0100::0FAB:070B #NED1 SD
I: 0100::0FAB: #NED1 SD
P: 0100::0FAC:070C #NED2 SD
I: 0100::0FAC: #NED2 SD
P: 0100::0FAD:070D #NED3 SD
I: 0100::0FAD: #NED3 SD
P: 0100::07D4:070B #RTL4 SD
I: 0100::07D4: #RTL4 SD
P: 0100::07D5:070C #RTL5 SD
I: 0100::07D5: #RTL5 SD
P: 0100::0FA2:0709 #SBS6 SD
I: 0100::0FA2 #SBS6 SD
P: 0100::07EF:070F #Veronica SD
I: 0100::07EF: #Veronica SD
P: 0100::1793:070E #Boomerang
I: 0100::1793 #Boomerang
P: 0100::07FF:0714 #Animax
I: 0100::07FF: #Animax
P: 0100::07D6:0711 #RTL7 SD
I: 0100::07D6: #RTL7 SD
P: 0100::0FA3:070A #NET5 SD
I: 0100::0FA3: #NET5 SD
P: 0100::13AA:0134 #NAT GEO WILD
I: 0100::13AA: #NAT GEO WILD
P: 0100::1B67:070A #NAT GEO WILD
I: 0100::1B67: #NAT GEO WILD
P: 0100::17CA:0717 #SBS6HD
I: 0100::17CA: #SBS6HD
P: 0100::5212:0709 #RTL7HD
I: 0100::5212: #RTL7HD
P: 0100::1B7B:070E #NED1HD
I: 0100::1B7B: #NED1HD
P: 0100::1B7C:070D #RTL8HD
I: 0100::1B7C: #RTL8HD
P: 0100::17A7:0726 #Vitaliteit
I: 0100::1B7C: #Vitaliteit
P: 0100::17C0:0716 #NED2HD
I: 0100::17C0: #NED2HD
P: 0100::51D6:0711 #NED3HD
I: 0100::51D6: #NED3HD
P: 0100::1B6C:070B #RTL4HD
I: 0100::1B6C: #RTL4HD
P: 0100::5217:070A #RTL5HD
I: 0100::5217: #RTL5HD
P: 0100::07F3:0710 #RTL8
I: 0100::07F3: #RTL8
P: 0100::521c:070B #NET5HD
I: 0100::521c: #NET5HD
P: 0100::522b:0711 #Veronica HD
P: 0100::522b:070F #Veronica/disneyXD
I: 0100::522b: #Veronica/disneyXD
P: 0100::1784:070B #Consumenten TV 24
I: 0100::1784: #Consumenten TV 24
P: 0100::177A:0709 #Geschiedenis 24
I: 0100::177A: #Geschiedenis 24
P: 0100::177F:070A #Holland Doc 24
I: 0100::177F: #Holland Doc 24
P: 0100::1789:070C #Humor/NostalgieNet
I: 0100::1789: #Humor/NostalgieNet
P: 0100::5146:070E #AT5
I: 0100::5146: #AT5
P: 0100::5142:070A #Limburg
I: 0100::5142: #Limburg
P: 0100::5144:070C #TV WEST
I: 0100::5144: #TV WEST
P: 0100::51DB:0712 #FILM1 HD
I: 0100::51DB: #FILM1 HD
P: 0100::07E9:0718 #Eurosport
I: 0100::07E9: #Eurosport
P: 0100::13B1:00B5 #Eurosport HD
I: 0100::13B1: #Eurosport HD
P: 0100::13B9:00B5 #Eurosport HD dut
I: 0100::13B9: #Eurosport HD dut
P: 0100::0041:1FDA #Eurosport 2
I: 0100::0041: #Eurosport 2
P: 0100::3335:01CF #ESPN America
I: 0100::3335: #ESPN America
P: 0100::2525:15DB #Motors TV
I: 0100::2525: #Motors TV
P: 0100::219F:15CB #Y&S;
I: 0100::219F: #Y&S;
P: 0100::1B71:070C #BRAVA HD
I: 0100::1B71: #BRAVA HD
P: 0100::1F47:16D1 #MEzzo
I: 0100::1F47: #MEzzo
P: 0100::6FB8:07DF #MTV HD
I: 0100::6FB8: #MTV HD
P: 0100::6FF3:190E #MTV ROCKS
I: 0100::6FF3: #MTV ROCKS
P: 0100::6FFF:190F #MTV
I: 0100::6FFF: #MTV
P: 0100::31F9:0715 #TV Oranje
I: 0100::31F9: #TV Oranje
P: 0100::6FF0:1911 #VH1
I: 0100::6FF0: #VH1
P: 0100::6FF1:1910 #VH1 Classic
I: 0100::6FF1: #VH1 Classic
P: 0100::1B62:0709 #Discovery HD
I: 0100::1B62: #Discovery HD
P: 0100::13B0:00B6 #History HD
I: 0100::13B0: #History HD
P: 0100::07F4:0715 #Comedy Central
I: 0100::07F4: #Comedy Central
P: 0100::17A7:0726 #Vitaliteit
I: 0100::17A7: #Vitaliteit
P: 0100::0046:1FE7 #Alpengluhen
I: 0100::0046: #NED1 SD
P: 0100::17AC:0713 #BiB
I: 0100::17AC: #Bib
P: 0100::07E4:070D #Animal Planet
I: 0100::07E4: #Animal Planet
P: 0100::07DF:070A #Discovery
I: 0100::07DF: #Discovery
P: 0100::1798:070F #Discovery Science
I: 0100::1798: #Discovery Science
P: 0100::179D:0710 #Discovery Travel & Living
I: 0100::179D: #Discovery Travel & Living
P: 0100::0FAF:0713 #NGC
I: 0100::0FAF: #NGC
P: 0100::13c0:0EC2 #Travel Channel HD
I: 0100::13c0: #Travel Channel HD
P: 0100::0FAE:0716 #Nickelodeon
I: 0100::0FAE: #Nickelodeon
P: 0100::17CC:0719 #EDL1 HD
I: 0100::17CC: #EDL1 HD
P: 0100::51C7:070E #EDL2
I: 0100::51C7: #EDL2
P: 0100::6FB8:07DF #MTV Live HD
I: 0100::6FB8: #MTV Live HD
P: 0100::51E0:0713 #Sport1LiveHD
I: 0100::51E0: #Sport1LiveHD
P: 0100::51C2:070D #Sport1Golf
I: 0100::51C2: #Sport1Golf
P: 0100::51BD:070C #Sport1Tennis
I: 0100::51BD: #Sport1Tennis

P: 0100::0808:0745 #NL-Radio2
I: 0100::0808: #NL-Radio2
P: 0100::0809:0746 #NL-3FM
I: 0100::0809: #NL-3FM
P: 0100::080A:0747 #NL-Radio4
I: 0100::080A: #NL-Radio4
P: 0100::0FBE:0718 #BNR nieuwsradio
I: 0100::0FBE: #BNR nieuwsradio

P: 0100::5221:070C #Een HD NL kaart
#P: 0100::5221:0720 #Een HD TVV
I: 0100::5221: #Een HD
P: 0100::5226:070D #Ketnet HD NL Kaart
#P: 0100::5226:0721 #Ketnet HD TVV
I: 0100::5226: #Ketnet HD
P: 0100:00006A:31E7:070D #Een SD NL kaart
#P: 0100:00006C:31E7: #Een SD
I: 0100::31E7: #Een SD
P: 0100:00006A:31E8:070E #Ketnet SD NL kaart
#P: 0100:00006C:31E8: #Ketnet SD
I: 0100::31E8: #Ketnet SD

==oscam.dvbapi differences with TV Vlaanderen card==

Change last part of oscam.dvbapi into:

#P: 0100::5221:070C #Een HD NL kaart
P: 0100::5221:0720 #Een HD TVV
I: 0100::5221: #Een HD
#P: 0100::5226:070D #Ketnet HD NL Kaart
P: 0100::5226:0721 #Ketnet HD TVV
I: 0100::5226: #Ketnet HD
#P: 0100:00006A:31E7:070D #Een SD NL kaart
P: 0100:00006C:31E7: #Een SD
I: 0100::31E7: #Een SD
#P: 0100:00006A:31E8:070E #Ketnet SD NL kaart
P: 0100:00006C:31E8: #Ketnet SD
I: 0100::31E8: #Ketnet SD

=====OScam Tuning=====

To tune your OScam settings further for your OpenPLi setupbox, please read further at [[http://openpli.org/wiki/Oscam-Tuning OScam-Tuning]].

----
Deletions:
======OScam, Open Source softcam======

OScam is a softcam, software to be used to decrypt digital television channels on a settopbox (receiver), as an alternative for a conditional access module (CAM). OScam is, compared with other softcams (CCcam, mgcamd, etc.), open source. Hence, the name Open Source Conditional Access Module (OScam). OScam is based on the not so well known softcam MpCS. The main features of OSCam are next to its softcam capabilities, that it is able to function as a cardserver.

=====OScam information on the web=====

Their is a official website of the developers of OScam:
- [[http://streamboard.gmc.to/wbb2/portal.php Click here to go to official developers board.]]
- [[http://streamboard.gmc.to/wiki/index.php/OSCam/en Click here to go to official OScam wiki.]]
- [[http://streamboard.gmc.to:8001/timeline Click here to see an overview of the last changes.]]

Their is also a user support website:
- [[http://www.oscam.to/wbb3/ Click here to go to OScam forum board]]
- [[http://www.oscam.to/wbb3/index.php?page=MibbitChat Click here to go to OScam Chat]]
- [[http://download.oscam.to/ Click here to go to OScam Download Center]]

Cutting edge binaries for the following brands are (available at OScam Download Center):
- mips-tuxbox-oe1.5 = Enigma1 DreamMultiMedia
- mips-tuxbox-oe1.6 = Enigma2 DreamMultiMedia, VU+, ClarkeTech, Xtrend, ...
- mips-tuxbox-oe2.0 = Enigma2 DreamMultiMedia (closed source)
- i386-pc-linux = normal intel linux pc
- x86_64-pc-linux = linux pc with 64 bit or AMD processor
- and many more ...

=====OScam installation=====

OScam is a highly configurable softcam. So a howto can be getting huge if everything is explained.

OScam has different configuration files. It's not possible to say, everybody needs to configure it the same way (like CCcam).
This because we have different hardware, different sat tv providers, and different home networks. So maybe we can give examples.

OpenPLi has six different OScam Plugins available for enigma2 boxes:
- oscam-stable as 1.10 Open Source Softcam (revision 5741)
- oscam-stable-cs as 1.10 Open Source Softcam only as cardserver
- oscam-unstable as 1.10 Open Source Softcam (revision 6089, last 1.10 version)
- oscam-unstable-cs as 1.10 Open Source Softcam only as cardserver
- oscam-experimental as 1.20 Open Source Softcam (latest revision)
- oscam-experimental-cs as 1.20 Open Source Softcam only as cardserver

Users with a M7 Group SECA3 card (the "new" cards of Canal Digitaal, TV Vlaanderen or TéléSAT) are advised to use version 1.20. Because this version is patched for grabbing the right CW's for a SECA2 and SECA3 cards.

These can be installed on your enigma2 OpenPLi box by pressing **Menu** on remote control and navigate to: **Plugins > DownloadPlugins > softcams > oscam-experimental**
for installing the oscam-experimental plugin. The other OScam plugins can be installed on a similar way.

The configuration files are stored in either of one of these directories on the box:
- /etc/tuxbox/config/oscam-stable/
- /etc/tuxbox/config/oscam-unstable/
- /etc/tuxbox/config/oscam-experimental/

**Update:** OScam-experimental is updated with the help of serveral OpenPli forum users. Since say version OSCAM 1.20 build #6458, OScam runs out of the box with Canal Digitaal smartcards. Yeah awesome!

The following four files need to be installed in configuration directories to let OScam function normally:
- oscam.conf
- oscam.server
- oscam.user
- oscam.dvbapi (in some cases)

In the next paragraphs the minimal content of the configuration files are given. With this config you can decrypt channels on your settopbox, if a smartcard is locally available. Further, an example is given to share your local card to another settopbox in your LAN. The cardsharing protocol used is the same as that of CCcam.

This explanation assumes you know how to edit files on your settopbox.

**Further it is assumed, that your settopbox is behind a firewall!**

The [[http://streamboard.gmc.to/wiki/index.php/OSCam/en OScam wiki]] gives a detailed description of all parameters.

====oscam.conf====

**[global]**
**logfile = /tmp/.oscam/oscam.log**
//This is where the log file is written, in case it is enabled.//
**disablelog = 1**
//Log file is disabled, just to make sure your box is not wasting flash space.//
**nice = -1**
//Make sure the program gets enough priority by the processor.//
**saveinithistory = 1**
//Let you see entitlements of cards.//
**dropdups = 1**
//A user is only allowed to login 1 time.//
**lb_mode = 1**
//Fastest card answer first, this means also not sending double ecm request to other cards.//
**lb_save = 120**
//Write after 120 ECM's the statistics to file.//
**lb_savepath = **
//The statistics are saved in /tmp/.oscam/stat.//
**lb_stat_cleanup = 12**
//For home users after 12 hours the stats are cleaned. To make sure your statistics doesn't have bad entries.//

**[monitor]**
**port = 16500**
**nocrypt = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0–172.31.255.255,192.168.0.0-192.168.255.255**
//You are allowed to monitor from localhost, and all LAN with home ip.//
**hideclient_to = 15**
//Hide clients from monitor or webinterface after 15 seconds idleness.//
**monlevel = 4**
**appendchaninfo = 1**
//Change hexadecimal channel number into a channel name.//

**[cccam]**
**port = 12000**
**reshare = 1**
//Only your other local boxes are allowed to access your cards.//
**version = 2.3.0**
//As far as this wiki knows, latest CCcam version is 2.3.0.//

**[dvbapi]**
**enabled = 1**
**au = 1**
//Makes sure your card is updated with emm's.//
**boxtype = dreambox**
**user = dvbapiau**

**[webif]**
**httpport = 16200**
**httprefresh = 30**
//Every 30 seconds a refresh.//
**httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0–172.31.255.255,192.168.0.0-192.168.255.255**
//You are allowed to access the webinterface from localhost, and all LAN with home ip.//
**httphideidleclients = 1**
//Do not show clients/users, who are not requesting ecm's.//

====oscam.server====

**[reader]**
**label = first_internal_reader**
**description = For dreambox lower smartcard slot, for VU+ DUO upper slot**
**protocol = internal**
**device = /dev/sci0**
**detect = cd**
**group = 1**
**emmcache = 1,1,0**
//Makes sure that emm's are cached and written. The emm's are not logged.//
**dropbadcws = 1**
//Do not answer bad cw's.//
**ratelimitecm = 4**
//Only for M7 SECA3 cards (Canal Digitaal, TV Vlaanderen and Telesat), maximum allowable channels to watch are 4 in a certain time period.//
**ratelimitseconds = 11**
//This time period after you can change the 4 requests into 4 different requests. For M7 SECA3 cards, this should vary between 9 and 11 seconds, with 11 seconds as safest choice.//

**[reader]**
**label = second_internal_reader**
**description = For dreambox upper smartcard slot, for VU+ DUO lower slot**
**protocol = internal**
**device = /dev/sci1**
**detect = cd**
**group = 2**
**emmcache = 1,1,0**
**dropbadcws = 1**
**ratelimitecm = 4**
**ratelimitseconds = 11**

If there isn't a second smartcard reader slot, it isn't needed to add. The parts below are shown as examples.

**[reader]**
**label = external_reader**
**description = External reader connected to serial or USB port of box, such as smargo's or mouse**
**protocol = mouse**
**device = /dev/ttyUSB0**
//Example for a smargo or mouse connected to USB port with ftdi_sio kernel driver.//
**detect = cd**
**group = 3**
**emmcache = 1,1,0**
**dropbadcws = 1**
**ratelimitecm = 4**
**ratelimitseconds = 11**

**[reader]**
**label = lan_cccam**
**description = CCcam LAN connection**
**protocol = cccam**
//The corresponding user definition is given in oscam.user paragraph.//
**device = 192.168.0.x,12000**
//Connect to server 192.168.0.x (or your local server box) at port number 12000.//
**user = username**
//Change into the right user name.//
**password = password**
//Change into the right password.//
**group = 4**
**cccversion = 2.3.0**
//Latest known version of CCcam.//
**ccckeepalive = 1**
//Makes sure the server is not disconnected, due to idleness.//

====oscam.user====

**[account]**
**user = dvbapiau**
//Same username as in oscam.conf in the [dvbapi] section.//
**pwd = **
//Line with pwd is needed, but should be set blank.//
**group = 1,2,3,4**
//The user is only allowed to access the readers 1 until 4.//
**uniq = 3**
//Only the last and one instance is allowed of this user.//
**monlevel = 0**
//Monitoring is not allowed with this account.//
**au = 1**
//The settopbox is allowed to send EMM towards the readers, to update the entitlements of the cards.//

**[account]**
**user = usermonitor**
//Account name of the monitor//
**pwd = passwordmonitor**
//Password for the user monitor account.//
**group = 1,2,3,4**
//Allowed groups to monitor/access.//
**uniq = 1**
//Only the one instance is allowed of this user.//

**[account]**
**user = username**
//Change into the right user name.//
**pwd = password**
//Change into the right password.//
**group = 1,2,3,4**
**uniq = 3**
**monlevel = 0**
**au = 1**
**allowedprotocols = cccam**
//It is only allowed to logon with the CCcam protocol.//
**cccmaxhops = 1**
//The user is only allowed to get ecm from local readers and readers connected to boxes in your lan (1 hop away).//

====oscam.dvbapi====

In this paragraph two version of oscam.dvbapi are given. The first should be used with version less than revision 6421, denoted as version 1.10. The other, denoted as version 1.20, can be used for revisions from 6421.

===oscam.dvbapi version 1.20===

Can be kept empty, due to code changes that can handle multicrypt on channels with SECA2 and SECA3 encryption.

===oscam.dvbapi version 1.10 for a SECA3 Canal Digital card===

P: 0100::0FAB:070B #NED1 SD
I: 0100::0FAB: #NED1 SD
P: 0100::0FAC:070C #NED2 SD
I: 0100::0FAC: #NED2 SD
P: 0100::0FAD:070D #NED3 SD
I: 0100::0FAD: #NED3 SD
P: 0100::07D4:070B #RTL4 SD
I: 0100::07D4: #RTL4 SD
P: 0100::07D5:070C #RTL5 SD
I: 0100::07D5: #RTL5 SD
P: 0100::0FA2:0709 #SBS6 SD
I: 0100::0FA2 #SBS6 SD
P: 0100::07EF:070F #Veronica SD
I: 0100::07EF: #Veronica SD
P: 0100::1793:070E #Boomerang
I: 0100::1793 #Boomerang
P: 0100::07FF:0714 #Animax
I: 0100::07FF: #Animax
P: 0100::07D6:0711 #RTL7 SD
I: 0100::07D6: #RTL7 SD
P: 0100::0FA3:070A #NET5 SD
I: 0100::0FA3: #NET5 SD
P: 0100::13AA:0134 #NAT GEO WILD
I: 0100::13AA: #NAT GEO WILD
P: 0100::1B67:070A #NAT GEO WILD
I: 0100::1B67: #NAT GEO WILD
P: 0100::17CA:0717 #SBS6HD
I: 0100::17CA: #SBS6HD
P: 0100::5212:0709 #RTL7HD
I: 0100::5212: #RTL7HD
P: 0100::1B7B:070E #NED1HD
I: 0100::1B7B: #NED1HD
P: 0100::1B7C:070D #RTL8HD
I: 0100::1B7C: #RTL8HD
P: 0100::17A7:0726 #Vitaliteit
I: 0100::1B7C: #Vitaliteit
P: 0100::17C0:0716 #NED2HD
I: 0100::17C0: #NED2HD
P: 0100::51D6:0711 #NED3HD
I: 0100::51D6: #NED3HD
P: 0100::1B6C:070B #RTL4HD
I: 0100::1B6C: #RTL4HD
P: 0100::5217:070A #RTL5HD
I: 0100::5217: #RTL5HD
P: 0100::07F3:0710 #RTL8
I: 0100::07F3: #RTL8
P: 0100::521c:070B #NET5HD
I: 0100::521c: #NET5HD
P: 0100::522b:0711 #Veronica HD
P: 0100::522b:070F #Veronica/disneyXD
I: 0100::522b: #Veronica/disneyXD
P: 0100::1784:070B #Consumenten TV 24
I: 0100::1784: #Consumenten TV 24
P: 0100::177A:0709 #Geschiedenis 24
I: 0100::177A: #Geschiedenis 24
P: 0100::177F:070A #Holland Doc 24
I: 0100::177F: #Holland Doc 24
P: 0100::1789:070C #Humor/NostalgieNet
I: 0100::1789: #Humor/NostalgieNet
P: 0100::5146:070E #AT5
I: 0100::5146: #AT5
P: 0100::5142:070A #Limburg
I: 0100::5142: #Limburg
P: 0100::5144:070C #TV WEST
I: 0100::5144: #TV WEST
P: 0100::51DB:0712 #FILM1 HD
I: 0100::51DB: #FILM1 HD
P: 0100::07E9:0718 #Eurosport
I: 0100::07E9: #Eurosport
P: 0100::13B1:00B5 #Eurosport HD
I: 0100::13B1: #Eurosport HD
P: 0100::13B9:00B5 #Eurosport HD dut
I: 0100::13B9: #Eurosport HD dut
P: 0100::0041:1FDA #Eurosport 2
I: 0100::0041: #Eurosport 2
P: 0100::3335:01CF #ESPN America
I: 0100::3335: #ESPN America
P: 0100::2525:15DB #Motors TV
I: 0100::2525: #Motors TV
P: 0100::219F:15CB #Y&S
I: 0100::219F: #Y&S
P: 0100::1B71:070C #BRAVA HD
I: 0100::1B71: #BRAVA HD
P: 0100::1F47:16D1 #MEzzo
I: 0100::1F47: #MEzzo
P: 0100::6FB8:07DF #MTV HD
I: 0100::6FB8: #MTV HD
P: 0100::6FF3:190E #MTV ROCKS
I: 0100::6FF3: #MTV ROCKS
P: 0100::6FFF:190F #MTV
I: 0100::6FFF: #MTV
P: 0100::31F9:0715 #TV Oranje
I: 0100::31F9: #TV Oranje
P: 0100::6FF0:1911 #VH1
I: 0100::6FF0: #VH1
P: 0100::6FF1:1910 #VH1 Classic
I: 0100::6FF1: #VH1 Classic
P: 0100::1B62:0709 #Discovery HD
I: 0100::1B62: #Discovery HD
P: 0100::13B0:00B6 #History HD
I: 0100::13B0: #History HD
P: 0100::07F4:0715 #Comedy Central
I: 0100::07F4: #Comedy Central
P: 0100::17A7:0726 #Vitaliteit
I: 0100::17A7: #Vitaliteit
P: 0100::0046:1FE7 #Alpengluhen
I: 0100::0046: #NED1 SD
P: 0100::17AC:0713 #BiB
I: 0100::17AC: #Bib
P: 0100::07E4:070D #Animal Planet
I: 0100::07E4: #Animal Planet
P: 0100::07DF:070A #Discovery
I: 0100::07DF: #Discovery
P: 0100::1798:070F #Discovery Science
I: 0100::1798: #Discovery Science
P: 0100::179D:0710 #Discovery Travel & Living
I: 0100::179D: #Discovery Travel & Living
P: 0100::0FAF:0713 #NGC
I: 0100::0FAF: #NGC
P: 0100::13c0:0EC2 #Travel Channel HD
I: 0100::13c0: #Travel Channel HD
P: 0100::0FAE:0716 #Nickelodeon
I: 0100::0FAE: #Nickelodeon
P: 0100::17CC:0719 #EDL1 HD
I: 0100::17CC: #EDL1 HD
P: 0100::51C7:070E #EDL2
I: 0100::51C7: #EDL2
P: 0100::6FB8:07DF #MTV Live HD
I: 0100::6FB8: #MTV Live HD
P: 0100::51E0:0713 #Sport1LiveHD
I: 0100::51E0: #Sport1LiveHD
P: 0100::51C2:070D #Sport1Golf
I: 0100::51C2: #Sport1Golf
P: 0100::51BD:070C #Sport1Tennis
I: 0100::51BD: #Sport1Tennis

P: 0100::0808:0745 #NL-Radio2
I: 0100::0808: #NL-Radio2
P: 0100::0809:0746 #NL-3FM
I: 0100::0809: #NL-3FM
P: 0100::080A:0747 #NL-Radio4
I: 0100::080A: #NL-Radio4
P: 0100::0FBE:0718 #BNR nieuwsradio
I: 0100::0FBE: #BNR nieuwsradio

P: 0100::5221:070C #Een HD NL kaart
#P: 0100::5221:0720 #Een HD TVV
I: 0100::5221: #Een HD
P: 0100::5226:070D #Ketnet HD NL Kaart
#P: 0100::5226:0721 #Ketnet HD TVV
I: 0100::5226: #Ketnet HD
P: 0100:00006A:31E7:070D #Een SD NL kaart
#P: 0100:00006C:31E7: #Een SD
I: 0100::31E7: #Een SD
P: 0100:00006A:31E8:070E #Ketnet SD NL kaart
#P: 0100:00006C:31E8: #Ketnet SD
I: 0100::31E8: #Ketnet SD

==oscam.dvbapi differences with TV Vlaanderen card==

Change last part of oscam.dvbapi into:

#P: 0100::5221:070C #Een HD NL kaart
P: 0100::5221:0720 #Een HD TVV
I: 0100::5221: #Een HD
#P: 0100::5226:070D #Ketnet HD NL Kaart
P: 0100::5226:0721 #Ketnet HD TVV
I: 0100::5226: #Ketnet HD
#P: 0100:00006A:31E7:070D #Een SD NL kaart
P: 0100:00006C:31E7: #Een SD
I: 0100::31E7: #Een SD
#P: 0100:00006A:31E8:070E #Ketnet SD NL kaart
P: 0100:00006C:31E8: #Ketnet SD
I: 0100::31E8: #Ketnet SD

=====OScam Tuning=====

To tune your OScam settings further for your OpenPLi setupbox, please read further at [[http://openpli.org/wiki/Oscam-Tuning OScam-Tuning]].

----


Revision [4621]

Edited on 2012-06-15 21:43:16 by J3r03n5ky [correct oscam binary example names]
Additions:
======OScam, Open Source softcam======

OScam is a softcam, software to be used to decrypt digital television channels on a settopbox (receiver), as an alternative for a conditional access module (CAM). OScam is, compared with other softcams (CCcam, mgcamd, etc.), open source. Hence, the name Open Source Conditional Access Module (OScam). OScam is based on the not so well known softcam MpCS. The main features of OSCam are next to its softcam capabilities, that it is able to function as a cardserver.

=====OScam information on the web=====

Their is a official website of the developers of OScam:
- [[http://streamboard.gmc.to/wbb2/portal.php Click here to go to official developers board.]]
- [[http://streamboard.gmc.to/wiki/index.php/OSCam/en Click here to go to official OScam wiki.]]
- [[http://streamboard.gmc.to:8001/timeline Click here to see an overview of the last changes.]]

Their is also a user support website:
- [[http://www.oscam.to/wbb3/ Click here to go to OScam forum board]]
- [[http://www.oscam.to/wbb3/index.php?page=MibbitChat Click here to go to OScam Chat]]
- [[http://download.oscam.to/ Click here to go to OScam Download Center]]

Cutting edge binaries for the following brands are (available at OScam Download Center):
- mips-tuxbox-oe1.5 = Enigma1 DreamMultiMedia
- mips-tuxbox-oe1.6 = Enigma2 DreamMultiMedia, VU+, ClarkeTech, Xtrend, ...
- mips-tuxbox-oe2.0 = Enigma2 DreamMultiMedia (closed source)
- i386-pc-linux = normal intel linux pc
- x86_64-pc-linux = linux pc with 64 bit or AMD processor
- and many more ...

=====OScam installation=====

OScam is a highly configurable softcam. So a howto can be getting huge if everything is explained.

OScam has different configuration files. It's not possible to say, everybody needs to configure it the same way (like CCcam).
This because we have different hardware, different sat tv providers, and different home networks. So maybe we can give examples.

OpenPLi has six different OScam Plugins available for enigma2 boxes:
- oscam-stable as 1.10 Open Source Softcam (revision 5741)
- oscam-stable-cs as 1.10 Open Source Softcam only as cardserver
- oscam-unstable as 1.10 Open Source Softcam (revision 6089, last 1.10 version)
- oscam-unstable-cs as 1.10 Open Source Softcam only as cardserver
- oscam-experimental as 1.20 Open Source Softcam (latest revision)
- oscam-experimental-cs as 1.20 Open Source Softcam only as cardserver

Users with a M7 Group SECA3 card (the "new" cards of Canal Digitaal, TV Vlaanderen or TéléSAT) are advised to use version 1.20. Because this version is patched for grabbing the right CW's for a SECA2 and SECA3 cards.

These can be installed on your enigma2 OpenPLi box by pressing **Menu** on remote control and navigate to: **Plugins > DownloadPlugins > softcams > oscam-experimental**
for installing the oscam-experimental plugin. The other OScam plugins can be installed on a similar way.

The configuration files are stored in either of one of these directories on the box:
- /etc/tuxbox/config/oscam-stable/
- /etc/tuxbox/config/oscam-unstable/
- /etc/tuxbox/config/oscam-experimental/

**Update:** OScam-experimental is updated with the help of serveral OpenPli forum users. Since say version OSCAM 1.20 build #6458, OScam runs out of the box with Canal Digitaal smartcards. Yeah awesome!

The following four files need to be installed in configuration directories to let OScam function normally:
- oscam.conf
- oscam.server
- oscam.user
- oscam.dvbapi (in some cases)

In the next paragraphs the minimal content of the configuration files are given. With this config you can decrypt channels on your settopbox, if a smartcard is locally available. Further, an example is given to share your local card to another settopbox in your LAN. The cardsharing protocol used is the same as that of CCcam.

This explanation assumes you know how to edit files on your settopbox.

**Further it is assumed, that your settopbox is behind a firewall!**

The [[http://streamboard.gmc.to/wiki/index.php/OSCam/en OScam wiki]] gives a detailed description of all parameters.

====oscam.conf====

**[global]**
**logfile = /tmp/.oscam/oscam.log**
//This is where the log file is written, in case it is enabled.//
**disablelog = 1**
//Log file is disabled, just to make sure your box is not wasting flash space.//
**nice = -1**
//Make sure the program gets enough priority by the processor.//
**saveinithistory = 1**
//Let you see entitlements of cards.//
**dropdups = 1**
//A user is only allowed to login 1 time.//
**lb_mode = 1**
//Fastest card answer first, this means also not sending double ecm request to other cards.//
**lb_save = 120**
//Write after 120 ECM's the statistics to file.//
**lb_savepath = **
//The statistics are saved in /tmp/.oscam/stat.//
**lb_stat_cleanup = 12**
//For home users after 12 hours the stats are cleaned. To make sure your statistics doesn't have bad entries.//

**[monitor]**
**port = 16500**
**nocrypt = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0–172.31.255.255,192.168.0.0-192.168.255.255**
//You are allowed to monitor from localhost, and all LAN with home ip.//
**hideclient_to = 15**
//Hide clients from monitor or webinterface after 15 seconds idleness.//
**monlevel = 4**
**appendchaninfo = 1**
//Change hexadecimal channel number into a channel name.//

**[cccam]**
**port = 12000**
**reshare = 1**
//Only your other local boxes are allowed to access your cards.//
**version = 2.3.0**
//As far as this wiki knows, latest CCcam version is 2.3.0.//

**[dvbapi]**
**enabled = 1**
**au = 1**
//Makes sure your card is updated with emm's.//
**boxtype = dreambox**
**user = dvbapiau**

**[webif]**
**httpport = 16200**
**httprefresh = 30**
//Every 30 seconds a refresh.//
**httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0–172.31.255.255,192.168.0.0-192.168.255.255**
//You are allowed to access the webinterface from localhost, and all LAN with home ip.//
**httphideidleclients = 1**
//Do not show clients/users, who are not requesting ecm's.//

====oscam.server====

**[reader]**
**label = first_internal_reader**
**description = For dreambox lower smartcard slot, for VU+ DUO upper slot**
**protocol = internal**
**device = /dev/sci0**
**detect = cd**
**group = 1**
**emmcache = 1,1,0**
//Makes sure that emm's are cached and written. The emm's are not logged.//
**dropbadcws = 1**
//Do not answer bad cw's.//
**ratelimitecm = 4**
//Only for M7 SECA3 cards (Canal Digitaal, TV Vlaanderen and Telesat), maximum allowable channels to watch are 4 in a certain time period.//
**ratelimitseconds = 11**
//This time period after you can change the 4 requests into 4 different requests. For M7 SECA3 cards, this should vary between 9 and 11 seconds, with 11 seconds as safest choice.//

**[reader]**
**label = second_internal_reader**
**description = For dreambox upper smartcard slot, for VU+ DUO lower slot**
**protocol = internal**
**device = /dev/sci1**
**detect = cd**
**group = 2**
**emmcache = 1,1,0**
**dropbadcws = 1**
**ratelimitecm = 4**
**ratelimitseconds = 11**

If there isn't a second smartcard reader slot, it isn't needed to add. The parts below are shown as examples.

**[reader]**
**label = external_reader**
**description = External reader connected to serial or USB port of box, such as smargo's or mouse**
**protocol = mouse**
**device = /dev/ttyUSB0**
//Example for a smargo or mouse connected to USB port with ftdi_sio kernel driver.//
**detect = cd**
**group = 3**
**emmcache = 1,1,0**
**dropbadcws = 1**
**ratelimitecm = 4**
**ratelimitseconds = 11**

**[reader]**
**label = lan_cccam**
**description = CCcam LAN connection**
**protocol = cccam**
//The corresponding user definition is given in oscam.user paragraph.//
**device = 192.168.0.x,12000**
//Connect to server 192.168.0.x (or your local server box) at port number 12000.//
**user = username**
//Change into the right user name.//
**password = password**
//Change into the right password.//
**group = 4**
**cccversion = 2.3.0**
//Latest known version of CCcam.//
**ccckeepalive = 1**
//Makes sure the server is not disconnected, due to idleness.//

====oscam.user====

**[account]**
**user = dvbapiau**
//Same username as in oscam.conf in the [dvbapi] section.//
**pwd = **
//Line with pwd is needed, but should be set blank.//
**group = 1,2,3,4**
//The user is only allowed to access the readers 1 until 4.//
**uniq = 3**
//Only the last and one instance is allowed of this user.//
**monlevel = 0**
//Monitoring is not allowed with this account.//
**au = 1**
//The settopbox is allowed to send EMM towards the readers, to update the entitlements of the cards.//

**[account]**
**user = usermonitor**
//Account name of the monitor//
**pwd = passwordmonitor**
//Password for the user monitor account.//
**group = 1,2,3,4**
//Allowed groups to monitor/access.//
**uniq = 1**
//Only the one instance is allowed of this user.//

**[account]**
**user = username**
//Change into the right user name.//
**pwd = password**
//Change into the right password.//
**group = 1,2,3,4**
**uniq = 3**
**monlevel = 0**
**au = 1**
**allowedprotocols = cccam**
//It is only allowed to logon with the CCcam protocol.//
**cccmaxhops = 1**
//The user is only allowed to get ecm from local readers and readers connected to boxes in your lan (1 hop away).//

====oscam.dvbapi====

In this paragraph two version of oscam.dvbapi are given. The first should be used with version less than revision 6421, denoted as version 1.10. The other, denoted as version 1.20, can be used for revisions from 6421.

===oscam.dvbapi version 1.20===

Can be kept empty, due to code changes that can handle multicrypt on channels with SECA2 and SECA3 encryption.

===oscam.dvbapi version 1.10 for a SECA3 Canal Digital card===

P: 0100::0FAB:070B #NED1 SD
I: 0100::0FAB: #NED1 SD
P: 0100::0FAC:070C #NED2 SD
I: 0100::0FAC: #NED2 SD
P: 0100::0FAD:070D #NED3 SD
I: 0100::0FAD: #NED3 SD
P: 0100::07D4:070B #RTL4 SD
I: 0100::07D4: #RTL4 SD
P: 0100::07D5:070C #RTL5 SD
I: 0100::07D5: #RTL5 SD
P: 0100::0FA2:0709 #SBS6 SD
I: 0100::0FA2 #SBS6 SD
P: 0100::07EF:070F #Veronica SD
I: 0100::07EF: #Veronica SD
P: 0100::1793:070E #Boomerang
I: 0100::1793 #Boomerang
P: 0100::07FF:0714 #Animax
I: 0100::07FF: #Animax
P: 0100::07D6:0711 #RTL7 SD
I: 0100::07D6: #RTL7 SD
P: 0100::0FA3:070A #NET5 SD
I: 0100::0FA3: #NET5 SD
P: 0100::13AA:0134 #NAT GEO WILD
I: 0100::13AA: #NAT GEO WILD
P: 0100::1B67:070A #NAT GEO WILD
I: 0100::1B67: #NAT GEO WILD
P: 0100::17CA:0717 #SBS6HD
I: 0100::17CA: #SBS6HD
P: 0100::5212:0709 #RTL7HD
I: 0100::5212: #RTL7HD
P: 0100::1B7B:070E #NED1HD
I: 0100::1B7B: #NED1HD
P: 0100::1B7C:070D #RTL8HD
I: 0100::1B7C: #RTL8HD
P: 0100::17A7:0726 #Vitaliteit
I: 0100::1B7C: #Vitaliteit
P: 0100::17C0:0716 #NED2HD
I: 0100::17C0: #NED2HD
P: 0100::51D6:0711 #NED3HD
I: 0100::51D6: #NED3HD
P: 0100::1B6C:070B #RTL4HD
I: 0100::1B6C: #RTL4HD
P: 0100::5217:070A #RTL5HD
I: 0100::5217: #RTL5HD
P: 0100::07F3:0710 #RTL8
I: 0100::07F3: #RTL8
P: 0100::521c:070B #NET5HD
I: 0100::521c: #NET5HD
P: 0100::522b:0711 #Veronica HD
P: 0100::522b:070F #Veronica/disneyXD
I: 0100::522b: #Veronica/disneyXD
P: 0100::1784:070B #Consumenten TV 24
I: 0100::1784: #Consumenten TV 24
P: 0100::177A:0709 #Geschiedenis 24
I: 0100::177A: #Geschiedenis 24
P: 0100::177F:070A #Holland Doc 24
I: 0100::177F: #Holland Doc 24
P: 0100::1789:070C #Humor/NostalgieNet
I: 0100::1789: #Humor/NostalgieNet
P: 0100::5146:070E #AT5
I: 0100::5146: #AT5
P: 0100::5142:070A #Limburg
I: 0100::5142: #Limburg
P: 0100::5144:070C #TV WEST
I: 0100::5144: #TV WEST
P: 0100::51DB:0712 #FILM1 HD
I: 0100::51DB: #FILM1 HD
P: 0100::07E9:0718 #Eurosport
I: 0100::07E9: #Eurosport
P: 0100::13B1:00B5 #Eurosport HD
I: 0100::13B1: #Eurosport HD
P: 0100::13B9:00B5 #Eurosport HD dut
I: 0100::13B9: #Eurosport HD dut
P: 0100::0041:1FDA #Eurosport 2
I: 0100::0041: #Eurosport 2
P: 0100::3335:01CF #ESPN America
I: 0100::3335: #ESPN America
P: 0100::2525:15DB #Motors TV
I: 0100::2525: #Motors TV
P: 0100::219F:15CB #Y&S
I: 0100::219F: #Y&S
P: 0100::1B71:070C #BRAVA HD
I: 0100::1B71: #BRAVA HD
P: 0100::1F47:16D1 #MEzzo
I: 0100::1F47: #MEzzo
P: 0100::6FB8:07DF #MTV HD
I: 0100::6FB8: #MTV HD
P: 0100::6FF3:190E #MTV ROCKS
I: 0100::6FF3: #MTV ROCKS
P: 0100::6FFF:190F #MTV
I: 0100::6FFF: #MTV
P: 0100::31F9:0715 #TV Oranje
I: 0100::31F9: #TV Oranje
P: 0100::6FF0:1911 #VH1
I: 0100::6FF0: #VH1
P: 0100::6FF1:1910 #VH1 Classic
I: 0100::6FF1: #VH1 Classic
P: 0100::1B62:0709 #Discovery HD
I: 0100::1B62: #Discovery HD
P: 0100::13B0:00B6 #History HD
I: 0100::13B0: #History HD
P: 0100::07F4:0715 #Comedy Central
I: 0100::07F4: #Comedy Central
P: 0100::17A7:0726 #Vitaliteit
I: 0100::17A7: #Vitaliteit
P: 0100::0046:1FE7 #Alpengluhen
I: 0100::0046: #NED1 SD
P: 0100::17AC:0713 #BiB
I: 0100::17AC: #Bib
P: 0100::07E4:070D #Animal Planet
I: 0100::07E4: #Animal Planet
P: 0100::07DF:070A #Discovery
I: 0100::07DF: #Discovery
P: 0100::1798:070F #Discovery Science
I: 0100::1798: #Discovery Science
P: 0100::179D:0710 #Discovery Travel & Living
I: 0100::179D: #Discovery Travel & Living
P: 0100::0FAF:0713 #NGC
I: 0100::0FAF: #NGC
P: 0100::13c0:0EC2 #Travel Channel HD
I: 0100::13c0: #Travel Channel HD
P: 0100::0FAE:0716 #Nickelodeon
I: 0100::0FAE: #Nickelodeon
P: 0100::17CC:0719 #EDL1 HD
I: 0100::17CC: #EDL1 HD
P: 0100::51C7:070E #EDL2
I: 0100::51C7: #EDL2
P: 0100::6FB8:07DF #MTV Live HD
I: 0100::6FB8: #MTV Live HD
P: 0100::51E0:0713 #Sport1LiveHD
I: 0100::51E0: #Sport1LiveHD
P: 0100::51C2:070D #Sport1Golf
I: 0100::51C2: #Sport1Golf
P: 0100::51BD:070C #Sport1Tennis
I: 0100::51BD: #Sport1Tennis

P: 0100::0808:0745 #NL-Radio2
I: 0100::0808: #NL-Radio2
P: 0100::0809:0746 #NL-3FM
I: 0100::0809: #NL-3FM
P: 0100::080A:0747 #NL-Radio4
I: 0100::080A: #NL-Radio4
P: 0100::0FBE:0718 #BNR nieuwsradio
I: 0100::0FBE: #BNR nieuwsradio

P: 0100::5221:070C #Een HD NL kaart
#P: 0100::5221:0720 #Een HD TVV
I: 0100::5221: #Een HD
P: 0100::5226:070D #Ketnet HD NL Kaart
#P: 0100::5226:0721 #Ketnet HD TVV
I: 0100::5226: #Ketnet HD
P: 0100:00006A:31E7:070D #Een SD NL kaart
#P: 0100:00006C:31E7: #Een SD
I: 0100::31E7: #Een SD
P: 0100:00006A:31E8:070E #Ketnet SD NL kaart
#P: 0100:00006C:31E8: #Ketnet SD
I: 0100::31E8: #Ketnet SD

==oscam.dvbapi differences with TV Vlaanderen card==

Change last part of oscam.dvbapi into:

#P: 0100::5221:070C #Een HD NL kaart
P: 0100::5221:0720 #Een HD TVV
I: 0100::5221: #Een HD
#P: 0100::5226:070D #Ketnet HD NL Kaart
P: 0100::5226:0721 #Ketnet HD TVV
I: 0100::5226: #Ketnet HD
#P: 0100:00006A:31E7:070D #Een SD NL kaart
P: 0100:00006C:31E7: #Een SD
I: 0100::31E7: #Een SD
#P: 0100:00006A:31E8:070E #Ketnet SD NL kaart
P: 0100:00006C:31E8: #Ketnet SD
I: 0100::31E8: #Ketnet SD

=====OScam Tuning=====

To tune your OScam settings further for your OpenPLi setupbox, please read further at [[http://openpli.org/wiki/Oscam-Tuning OScam-Tuning]].

----
Deletions:
======OScam, Open Source softcam======

OScam is a softcam, software to be used to decrypt digital television channels on a settopbox (receiver), as an alternative for a conditional access module (CAM). OScam is, compared with other softcams (CCcam, mgcamd, etc.), open source. Hence, the name Open Source Conditional Access Module (OScam). OScam is based on the not so well known softcam MpCS. The main features of OSCam are next to its softcam capabilities, that it is able to function as a cardserver.

=====OScam information on the web=====

Their is a official website of the developers of OScam:
- [[http://streamboard.gmc.to/wbb2/portal.php Click here to go to official developers board.]]
- [[http://streamboard.gmc.to/wiki/index.php/OSCam/en Click here to go to official OScam wiki.]]
- [[http://streamboard.gmc.to:8001/timeline Click here to see an overview of the last changes.]]

Their is also a user support website:
- [[http://www.oscam.to/wbb3/ Click here to go to OScam forum board]]
- [[http://www.oscam.to/wbb3/index.php?page=MibbitChat Click here to go to OScam Chat]]
- [[http://download.oscam.to/ Click here to go to OScam Download Center]]

Cutting edge binaries for the following brands are (available at OScam Download Center):
- mips-tuxbox-oe1.5 = Enigma1 DreamMultiMedia
- mips-tuxbox-oe1.6 = Enigma2 DreamMultiMedia, VU+, ClarkeTech, Xtrend,
- mips-tuxbox-oe2.0 = Enigma2 DreamMultiMedia (closed source)
- i386-pc-linux = normal intel linux pc
- x86_64-pc-linux = linux pc with 64 bit or AMD processor
- and many more.

=====OScam installation=====

OScam is a highly configurable softcam. So a howto can be getting huge if everything is explained.

OScam has different configuration files. It's not possible to say, everybody needs to configure it the same way (like CCcam).
This because we have different hardware, different sat tv providers, and different home networks. So maybe we can give examples.

OpenPLi has six different OScam Plugins available for enigma2 boxes:
- oscam-stable as 1.10 Open Source Softcam (revision 5741)
- oscam-stable-cs as 1.10 Open Source Softcam only as cardserver
- oscam-unstable as 1.10 Open Source Softcam (revision 6089, last 1.10 version)
- oscam-unstable-cs as 1.10 Open Source Softcam only as cardserver
- oscam-experimental as 1.20 Open Source Softcam (latest revision)
- oscam-experimental-cs as 1.20 Open Source Softcam only as cardserver

Users with a M7 Group SECA3 card (the "new" cards of Canal Digitaal, TV Vlaanderen or TéléSAT) are advised to use version 1.20. Because this version is patched for grabbing the right CW's for a SECA2 and SECA3 cards.

These can be installed on your enigma2 OpenPLi box by pressing **Menu** on remote control and navigate to: **Plugins > DownloadPlugins > softcams > oscam-experimental**
for installing the oscam-experimental plugin. The other OScam plugins can be installed on a similar way.

The configuration files are stored in either of one of these directories on the box:
- /etc/tuxbox/config/oscam-stable/
- /etc/tuxbox/config/oscam-unstable/
- /etc/tuxbox/config/oscam-experimental/

**Update:** OScam-experimental is updated with the help of serveral OpenPli forum users. Since say version OSCAM 1.20 build #6458, OScam runs out of the box with Canal Digitaal smartcards. Yeah awesome!

The following four files need to be installed in configuration directories to let OScam function normally:
- oscam.conf
- oscam.server
- oscam.user
- oscam.dvbapi (in some cases)

In the next paragraphs the minimal content of the configuration files are given. With this config you can decrypt channels on your settopbox, if a smartcard is locally available. Further, an example is given to share your local card to another settopbox in your LAN. The cardsharing protocol used is the same as that of CCcam.

This explanation assumes you know how to edit files on your settopbox.

**Further it is assumed, that your settopbox is behind a firewall!**

The [[http://streamboard.gmc.to/wiki/index.php/OSCam/en OScam wiki]] gives a detailed description of all parameters.

====oscam.conf====

**[global]**
**logfile = /tmp/.oscam/oscam.log**
//This is where the log file is written, in case it is enabled.//
**disablelog = 1**
//Log file is disabled, just to make sure your box is not wasting flash space.//
**nice = -1**
//Make sure the program gets enough priority by the processor.//
**saveinithistory = 1**
//Let you see entitlements of cards.//
**dropdups = 1**
//A user is only allowed to login 1 time.//
**lb_mode = 1**
//Fastest card answer first, this means also not sending double ecm request to other cards.//
**lb_save = 120**
//Write after 120 ECM's the statistics to file.//
**lb_savepath = **
//The statistics are saved in /tmp/.oscam/stat.//
**lb_stat_cleanup = 12**
//For home users after 12 hours the stats are cleaned. To make sure your statistics doesn't have bad entries.//

**[monitor]**
**port = 16500**
**nocrypt = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0–172.31.255.255,192.168.0.0-192.168.255.255**
//You are allowed to monitor from localhost, and all LAN with home ip.//
**hideclient_to = 15**
//Hide clients from monitor or webinterface after 15 seconds idleness.//
**monlevel = 4**
**appendchaninfo = 1**
//Change hexadecimal channel number into a channel name.//

**[cccam]**
**port = 12000**
**reshare = 1**
//Only your other local boxes are allowed to access your cards.//
**version = 2.3.0**
//As far as this wiki knows, latest CCcam version is 2.3.0.//

**[dvbapi]**
**enabled = 1**
**au = 1**
//Makes sure your card is updated with emm's.//
**boxtype = dreambox**
**user = dvbapiau**

**[webif]**
**httpport = 16200**
**httprefresh = 30**
//Every 30 seconds a refresh.//
**httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0–172.31.255.255,192.168.0.0-192.168.255.255**
//You are allowed to access the webinterface from localhost, and all LAN with home ip.//
**httphideidleclients = 1**
//Do not show clients/users, who are not requesting ecm's.//

====oscam.server====

**[reader]**
**label = first_internal_reader**
**description = For dreambox lower smartcard slot, for VU+ DUO upper slot**
**protocol = internal**
**device = /dev/sci0**
**detect = cd**
**group = 1**
**emmcache = 1,1,0**
//Makes sure that emm's are cached and written. The emm's are not logged.//
**dropbadcws = 1**
//Do not answer bad cw's.//
**ratelimitecm = 4**
//Only for M7 SECA3 cards (Canal Digitaal, TV Vlaanderen and Telesat), maximum allowable channels to watch are 4 in a certain time period.//
**ratelimitseconds = 11**
//This time period after you can change the 4 requests into 4 different requests. For M7 SECA3 cards, this should vary between 9 and 11 seconds, with 11 seconds as safest choice.//

**[reader]**
**label = second_internal_reader**
**description = For dreambox upper smartcard slot, for VU+ DUO lower slot**
**protocol = internal**
**device = /dev/sci1**
**detect = cd**
**group = 2**
**emmcache = 1,1,0**
**dropbadcws = 1**
**ratelimitecm = 4**
**ratelimitseconds = 11**

If there isn't a second smartcard reader slot, it isn't needed to add. The parts below are shown as examples.

**[reader]**
**label = external_reader**
**description = External reader connected to serial or USB port of box, such as smargo's or mouse**
**protocol = mouse**
**device = /dev/ttyUSB0**
//Example for a smargo or mouse connected to USB port with ftdi_sio kernel driver.//
**detect = cd**
**group = 3**
**emmcache = 1,1,0**
**dropbadcws = 1**
**ratelimitecm = 4**
**ratelimitseconds = 11**

**[reader]**
**label = lan_cccam**
**description = CCcam LAN connection**
**protocol = cccam**
//The corresponding user definition is given in oscam.user paragraph.//
**device = 192.168.0.x,12000**
//Connect to server 192.168.0.x (or your local server box) at port number 12000.//
**user = username**
//Change into the right user name.//
**password = password**
//Change into the right password.//
**group = 4**
**cccversion = 2.3.0**
//Latest known version of CCcam.//
**ccckeepalive = 1**
//Makes sure the server is not disconnected, due to idleness.//

====oscam.user====

**[account]**
**user = dvbapiau**
//Same username as in oscam.conf in the [dvbapi] section.//
**pwd = **
//Line with pwd is needed, but should be set blank.//
**group = 1,2,3,4**
//The user is only allowed to access the readers 1 until 4.//
**uniq = 3**
//Only the last and one instance is allowed of this user.//
**monlevel = 0**
//Monitoring is not allowed with this account.//
**au = 1**
//The settopbox is allowed to send EMM towards the readers, to update the entitlements of the cards.//

**[account]**
**user = usermonitor**
//Account name of the monitor//
**pwd = passwordmonitor**
//Password for the user monitor account.//
**group = 1,2,3,4**
//Allowed groups to monitor/access.//
**uniq = 1**
//Only the one instance is allowed of this user.//

**[account]**
**user = username**
//Change into the right user name.//
**pwd = password**
//Change into the right password.//
**group = 1,2,3,4**
**uniq = 3**
**monlevel = 0**
**au = 1**
**allowedprotocols = cccam**
//It is only allowed to logon with the CCcam protocol.//
**cccmaxhops = 1**
//The user is only allowed to get ecm from local readers and readers connected to boxes in your lan (1 hop away).//

====oscam.dvbapi====

In this paragraph two version of oscam.dvbapi are given. The first should be used with version less than revision 6421, denoted as version 1.10. The other, denoted as version 1.20, can be used for revisions from 6421.

===oscam.dvbapi version 1.20===

Can be kept empty, due to code changes that can handle multicrypt on channels with SECA2 and SECA3 encryption.

===oscam.dvbapi version 1.10 for a SECA3 Canal Digital card===

P: 0100::0FAB:070B #NED1 SD
I: 0100::0FAB: #NED1 SD
P: 0100::0FAC:070C #NED2 SD
I: 0100::0FAC: #NED2 SD
P: 0100::0FAD:070D #NED3 SD
I: 0100::0FAD: #NED3 SD
P: 0100::07D4:070B #RTL4 SD
I: 0100::07D4: #RTL4 SD
P: 0100::07D5:070C #RTL5 SD
I: 0100::07D5: #RTL5 SD
P: 0100::0FA2:0709 #SBS6 SD
I: 0100::0FA2 #SBS6 SD
P: 0100::07EF:070F #Veronica SD
I: 0100::07EF: #Veronica SD
P: 0100::1793:070E #Boomerang
I: 0100::1793 #Boomerang
P: 0100::07FF:0714 #Animax
I: 0100::07FF: #Animax
P: 0100::07D6:0711 #RTL7 SD
I: 0100::07D6: #RTL7 SD
P: 0100::0FA3:070A #NET5 SD
I: 0100::0FA3: #NET5 SD
P: 0100::13AA:0134 #NAT GEO WILD
I: 0100::13AA: #NAT GEO WILD
P: 0100::1B67:070A #NAT GEO WILD
I: 0100::1B67: #NAT GEO WILD
P: 0100::17CA:0717 #SBS6HD
I: 0100::17CA: #SBS6HD
P: 0100::5212:0709 #RTL7HD
I: 0100::5212: #RTL7HD
P: 0100::1B7B:070E #NED1HD
I: 0100::1B7B: #NED1HD
P: 0100::1B7C:070D #RTL8HD
I: 0100::1B7C: #RTL8HD
P: 0100::17A7:0726 #Vitaliteit
I: 0100::1B7C: #Vitaliteit
P: 0100::17C0:0716 #NED2HD
I: 0100::17C0: #NED2HD
P: 0100::51D6:0711 #NED3HD
I: 0100::51D6: #NED3HD
P: 0100::1B6C:070B #RTL4HD
I: 0100::1B6C: #RTL4HD
P: 0100::5217:070A #RTL5HD
I: 0100::5217: #RTL5HD
P: 0100::07F3:0710 #RTL8
I: 0100::07F3: #RTL8
P: 0100::521c:070B #NET5HD
I: 0100::521c: #NET5HD
P: 0100::522b:0711 #Veronica HD
P: 0100::522b:070F #Veronica/disneyXD
I: 0100::522b: #Veronica/disneyXD
P: 0100::1784:070B #Consumenten TV 24
I: 0100::1784: #Consumenten TV 24
P: 0100::177A:0709 #Geschiedenis 24
I: 0100::177A: #Geschiedenis 24
P: 0100::177F:070A #Holland Doc 24
I: 0100::177F: #Holland Doc 24
P: 0100::1789:070C #Humor/NostalgieNet
I: 0100::1789: #Humor/NostalgieNet
P: 0100::5146:070E #AT5
I: 0100::5146: #AT5
P: 0100::5142:070A #Limburg
I: 0100::5142: #Limburg
P: 0100::5144:070C #TV WEST
I: 0100::5144: #TV WEST
P: 0100::51DB:0712 #FILM1 HD
I: 0100::51DB: #FILM1 HD
P: 0100::07E9:0718 #Eurosport
I: 0100::07E9: #Eurosport
P: 0100::13B1:00B5 #Eurosport HD
I: 0100::13B1: #Eurosport HD
P: 0100::13B9:00B5 #Eurosport HD dut
I: 0100::13B9: #Eurosport HD dut
P: 0100::0041:1FDA #Eurosport 2
I: 0100::0041: #Eurosport 2
P: 0100::3335:01CF #ESPN America
I: 0100::3335: #ESPN America
P: 0100::2525:15DB #Motors TV
I: 0100::2525: #Motors TV
P: 0100::219F:15CB #Y&S;
I: 0100::219F: #Y&S;
P: 0100::1B71:070C #BRAVA HD
I: 0100::1B71: #BRAVA HD
P: 0100::1F47:16D1 #MEzzo
I: 0100::1F47: #MEzzo
P: 0100::6FB8:07DF #MTV HD
I: 0100::6FB8: #MTV HD
P: 0100::6FF3:190E #MTV ROCKS
I: 0100::6FF3: #MTV ROCKS
P: 0100::6FFF:190F #MTV
I: 0100::6FFF: #MTV
P: 0100::31F9:0715 #TV Oranje
I: 0100::31F9: #TV Oranje
P: 0100::6FF0:1911 #VH1
I: 0100::6FF0: #VH1
P: 0100::6FF1:1910 #VH1 Classic
I: 0100::6FF1: #VH1 Classic
P: 0100::1B62:0709 #Discovery HD
I: 0100::1B62: #Discovery HD
P: 0100::13B0:00B6 #History HD
I: 0100::13B0: #History HD
P: 0100::07F4:0715 #Comedy Central
I: 0100::07F4: #Comedy Central
P: 0100::17A7:0726 #Vitaliteit
I: 0100::17A7: #Vitaliteit
P: 0100::0046:1FE7 #Alpengluhen
I: 0100::0046: #NED1 SD
P: 0100::17AC:0713 #BiB
I: 0100::17AC: #Bib
P: 0100::07E4:070D #Animal Planet
I: 0100::07E4: #Animal Planet
P: 0100::07DF:070A #Discovery
I: 0100::07DF: #Discovery
P: 0100::1798:070F #Discovery Science
I: 0100::1798: #Discovery Science
P: 0100::179D:0710 #Discovery Travel & Living
I: 0100::179D: #Discovery Travel & Living
P: 0100::0FAF:0713 #NGC
I: 0100::0FAF: #NGC
P: 0100::13c0:0EC2 #Travel Channel HD
I: 0100::13c0: #Travel Channel HD
P: 0100::0FAE:0716 #Nickelodeon
I: 0100::0FAE: #Nickelodeon
P: 0100::17CC:0719 #EDL1 HD
I: 0100::17CC: #EDL1 HD
P: 0100::51C7:070E #EDL2
I: 0100::51C7: #EDL2
P: 0100::6FB8:07DF #MTV Live HD
I: 0100::6FB8: #MTV Live HD
P: 0100::51E0:0713 #Sport1LiveHD
I: 0100::51E0: #Sport1LiveHD
P: 0100::51C2:070D #Sport1Golf
I: 0100::51C2: #Sport1Golf
P: 0100::51BD:070C #Sport1Tennis
I: 0100::51BD: #Sport1Tennis

P: 0100::0808:0745 #NL-Radio2
I: 0100::0808: #NL-Radio2
P: 0100::0809:0746 #NL-3FM
I: 0100::0809: #NL-3FM
P: 0100::080A:0747 #NL-Radio4
I: 0100::080A: #NL-Radio4
P: 0100::0FBE:0718 #BNR nieuwsradio
I: 0100::0FBE: #BNR nieuwsradio

P: 0100::5221:070C #Een HD NL kaart
#P: 0100::5221:0720 #Een HD TVV
I: 0100::5221: #Een HD
P: 0100::5226:070D #Ketnet HD NL Kaart
#P: 0100::5226:0721 #Ketnet HD TVV
I: 0100::5226: #Ketnet HD
P: 0100:00006A:31E7:070D #Een SD NL kaart
#P: 0100:00006C:31E7: #Een SD
I: 0100::31E7: #Een SD
P: 0100:00006A:31E8:070E #Ketnet SD NL kaart
#P: 0100:00006C:31E8: #Ketnet SD
I: 0100::31E8: #Ketnet SD

==oscam.dvbapi differences with TV Vlaanderen card==

Change last part of oscam.dvbapi into:

#P: 0100::5221:070C #Een HD NL kaart
P: 0100::5221:0720 #Een HD TVV
I: 0100::5221: #Een HD
#P: 0100::5226:070D #Ketnet HD NL Kaart
P: 0100::5226:0721 #Ketnet HD TVV
I: 0100::5226: #Ketnet HD
#P: 0100:00006A:31E7:070D #Een SD NL kaart
P: 0100:00006C:31E7: #Een SD
I: 0100::31E7: #Een SD
#P: 0100:00006A:31E8:070E #Ketnet SD NL kaart
P: 0100:00006C:31E8: #Ketnet SD
I: 0100::31E8: #Ketnet SD

=====OScam Tuning=====

To tune your OScam settings further for your OpenPLi setupbox, please read further at [[http://openpli.org/wiki/Oscam-Tuning OScam-Tuning]].

----


Revision [4620]

Edited on 2012-06-15 21:42:36 by J3r03n5ky [correct oscam binary example names]
Additions:
- mips-tuxbox-oe1.5 = Enigma1 DreamMultiMedia
- mips-tuxbox-oe1.6 = Enigma2 DreamMultiMedia, VU+, ClarkeTech, Xtrend,
- mips-tuxbox-oe2.0 = Enigma2 DreamMultiMedia (closed source)
- and many more.
Deletions:
- powerpc-tuxbox-old = enigma1 DM500 or DM500-S
- powerpc-tuxbox = enigma1 DM600, DM7000, DM7020
- mips-tuxbox-oe2.0 = enigma2 DM800, DM800, DM7025


Revision [4616]

Edited on 2012-06-14 15:35:13 by arjan_vs [correct oscam binary example names]
Additions:
----
[[HomePage Back to the PLi® Wiki]] : [[softcamwiki SoftCam Wiki]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]] : [[vuplus VU+]]


Revision [4615]

Edited on 2012-06-14 14:01:30 by arjan_vs [correct oscam binary example names]
Additions:
=====OScam installation=====
=====OScam Tuning=====
To tune your OScam settings further for your OpenPLi setupbox, please read further at [[http://openpli.org/wiki/Oscam-Tuning OScam-Tuning]].
Deletions:
=====OScam howto=====
To tune your OScam settings further for your OpenPLi setupbox, please read further at OScam-Tuning.


Revision [4614]

Edited on 2012-06-14 13:56:27 by arjan_vs [correct oscam binary example names]
Additions:
To tune your OScam settings further for your OpenPLi setupbox, please read further at OScam-Tuning.
Deletions:
=====OSCam-Tuning=====


Revision [4613]

Edited on 2012-06-14 13:54:39 by arjan_vs [correct oscam binary example names]
Additions:
=====OSCam-Tuning=====
Deletions:
===Configuration examples of OScam users:===
**--------------------------------------------------------------------------------------------------**
Here my [[http://www.canaldigitaal.nl/klantenservice/smartcard.aspx CanalDigitaal]] example of OScam on a **DM8000** with two card readers and **CanalDigitaal** smart card .
**Update:** OScam-experimental is updated with help of serveral OpenPli forum users. Since say version OSCAM 1.20-unstable_svn build #6458, OScam runs out of the box with Canal Digitaal smartcards. Yeah awesome!
You only need to edit the **oscam.server** file if it doesn't work after install/restart. So the 4 files that are offered here are only nessesary with older OScams.
Download these 4 files when not using oscam-experimental(right click save link as): [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_stable_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]] + [[http://www.pli-images.org/files/wiki/013571_oscam.user oscam.user]]. Remove the numbers/names in front of downloaded file names, so that filenames are exactly the same as written here.
==Open **oscam.conf** with simple text editor (kate/vim/notepad plusplus) and edit the line:==
**nocrypt = 127.0.0.1,192.168.1.0-192.168.1.255**
//Be sure it's the ip range of your home network(or network where your enigma2 tuner is in).//
**httpport = 16002**
//This is the used port, to login go with browser after configuration to http://boxipaddress:16002 //
**httpuser = yourusernamehere**
**httppwd = yourpasswordhere**
//Be sure you give your user name and password that you want to use for web browser access to configure and check OScam.//
**httpallowed = 127.0.0.1,192.168.1.0-192.168.1.255**
//Be sure it's the ip range of your home network(or network where your enigma2 tuner is in).//
==Open **oscam.dvbapi** with simple text editor (kate/vim/notepad plusplus) and edit: ==
This example is ready for Dutch smart card of Canal Digitaal (not nessesary with oscam-experimental).
If you use **OScam-experimental**, then use this [[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] and change these settings to let this list work because of oscam bug: OScam webif(webbrowser) > Configuration > DVB-api > Request mode: try all caids simultaneously > save (thanks to users Fretsat, Erik Slagter, theparasol, zeeteefje)
To find out what you need to fill in for your sat tv operator smart card info [[http://streamboard.gmc.to:8001/wiki/CardsList check here]].
==Open **oscam.server** with simple text editor (kate/vim/notepad plusplus) and edit: ==
This example is ready for the two smart card readers of the DM8000. If your device has only one smart card reader, then remove the reader config of device /dev/sci1
I also added some examples of card servers. You see in this file 2 examples of free card server for CCcam and MGcamd clients. OScam can use card servers of non OScam too (yeah awesome!). [[http://streamboard.gmc.to/wiki/index.php/OSCam/en/examples/Reader Here a link to know how to added more readers]] (or cardservers) to oscam.server.
==**oscam.user** :==
I changed the oscam.user file. The username is now **localhost** same as in oscam.conf [dvbapi] .
Now if you edited **oscam.conf** + **oscam.dvbapi** + **oscam.server** correctly, it's time to upload them with the **oscam.user** file to your enigma2 tuner with a ftp client in the directory:
===/etc/tuxbox/config/oscam-stable/ (or if using experimental: /etc/tuxbox/config/oscam-experimental/ )===
Then press **Menu** on remote control and navigate to: **Setup > SoftCam/CI > Softcam setup... > Select softcam >** (press left or right to select) **oscam-stable (or oscam-experimental) >** press **green button**(ok).
Now for sure, reboot the Enigma2 tuner, and you got your OScam working. have fun with it, and please post examples like this here, for other tuners or satellite operators.
Now it is possible to access the configuration of your OsCam server by web interface:
http://ip_box:16002 (port 16002 refers to the configured port in oscam.conf under httpport = )
Update of user theparasol: __If (so when it works ok, then don't change)__ your seca3 v10 smartcard don't update properly, then check [[http://www.pli-images.org/getfile.php?type=a&file_id=11912 this PDF file]].
**--------------------------------------------------------------------------------------------------**
For using OScam with [[http://www.tv-vlaanderen.be/ TV Vlaanderen]] , [[http://www.tntsat.tv/ TNTsat]] . [[http://www.telesat.com/ TeleSat]]
==Open **oscam.server** with simple text editor (kate/vim/notepad plusplus) and edit: ==
You can use the files of CanalDigitaal config example.
Only the oscam.server file is different. No CanalDigitaal related reader configured but a reader you choose below.(be sure you configure the device -sci0/sci1/sci2/sci3- properly!, 4 example If you have the card in the second cardreader, then change /dev/sci0 to /dev/sci1 )
Added the provider reader you need in oscam.server file:
[reader]
label = cardreader-tvvlaanderen
protocol = internal
device = /dev/sci0
services = tvv
caid = 0100
detect = cd
mhz = 357
cardmhz = 500
group = 1
emmcache = 1,3,2
lb_weight = 1000
auprovid = 00006C
[reader]
label = cardreader-tntsat
protocol = internal
device = /dev/sci0
services = tntsat
caid = 0500
aeskeys = <your aes keys here>
detect = cd
mhz = 357
cardmhz = 500
group = 1
lb_weight= 1000
auprovid = 030B00
[reader]
label = cardreader-telesat
protocol = internal
device = /dev/sci0
services = telesat
caid = 0100
detect = cd
mhz = 357
cardmhz = 500
group = 1
emmcache = 1,3,2
lb_weight = 1000
auprovid = 00006D
Save the file and store it in when using oscam-experimental :
===/etc/tuxbox/config/oscam-stable/ (or if using experimental: /etc/tuxbox/config/oscam-experimental/ )===
Reboot and you can enjoy your working smartcard/choosen signal provider (tntsat example is made by user Fretsat, others by user daniel2005)
**--------------------------------------------------------------------------------------------------**
Examples from user daniel2005: (many thanks for this info)
**oscam.conf**
[global]
# first create the needed directory's and see if there is usb stick ,cf or hdd
usrfile = /media/hdd/oscam/oscamuser.log
logfile = /media/hdd/oscam/oscam.log
cwlogdir = /media/hdd/oscam
loghistorysize = 9999
unlockparental = 1
nice = -1
maxlogsize = 50
saveinithistory = 1
lb_mode = 1
lb_save = 100
lb_savepath = /media/hdd/oscam/stat
[monitor]
hideclient_to = 15
appendchaninfo = 0
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = localuser
request_mode = 1
[webif]
httpport = 5000
httphelplang = en
httpuser = user
httppwd = password
httpcss = /etc/tuxbox/config/proflinux_ddcstyle.css
httprefresh = 20
httpallowed = 127.0.0.1,192.168.1.1-192.168.1.254
You can replace these lines
usrfile = /media/hdd/oscam/oscamuser.log
logfile = /media/hdd/oscam/oscam.log
by
usrfile = stdout
logfile = stdout
the ccsfile must be in the config directory.
**oscam.server**
[reader]
label = cardreader-tvvlaanderen
protocol = internal
device = /dev/sci1
services = tvv
caid = 0100
detect = cd
mhz = 357
cardmhz = 500
group = 1
emmcache = 1,3,2
lb_weight = 1000
auprovid = 00006C
[reader]
label = cardreader-telesat
protocol = internal
device = /dev/sci1
services = telesat
caid = 0100
detect = cd
mhz = 357
cardmhz = 500
group = 1
emmcache = 1,3,2
lb_weight = 1000
auprovid = 00006D
the caid can be changed, but don't forget to change auprovider and the services.
**oscam.user**
[account]
user = localuser
group = 1
au = 1
that is the user for the dvapi, the au = 1 is for the update
**oscam.services**
[tvv]
caid = 0100
provid = 00006C,000000
srvid =
[ned]
caid = 0100
provid = 00006A,000000
srvid =
[telesat]
caid = 0100
provid = 00006D,,000000
srvid =
you can add srvid , but it's not nessesary when you've full account.
**oscam.dvbapi**
P: 0100:00006C # TVVlaanderen
P: 0100:00006A # Ned
P: 0100:00006D # T�l�sat
Sequence doesn't matter. If you ignore some caid or svrid, put them on top.
This file is added by daniel2005 : [[http://www.pli-images.org/getfile.php?type=a&file_id=11904 proflinux_ddcstyle.css]]
**--------------------------------------------------------------------------------------------------**
New mapping method working for BE and NL seca cards
Make sure you are using dvbapi request mode 1 / try all CAID simulataneously
Be sure to use a oscam unstable 1.20 rev 5941 or newer
**oscam.dvbapi**
I: 0100 #Oud seca NL+Vlaanderen
I: 0500 #Viaccess op vlaamse zenders
I: 0622 #Bleh... irdeto codering
M: 1817:00006A 0100:00006A #NL Pakket
M: 1818:00006C 0100:00006C #Vlaams Pakket
P: 1817:00006A #NL Pakket
P: 1818:00006C #Vlaams Pakket
**--------------------------------------------------------------------------------------------------**
Other examples here
**--------------------------------------------------------------------------------------------------**
**Howto for the extreme poweruser OScam diehard** (only for experienced users)
To customize your OScam version:
Download the latest experimental from [[http://download.oscam.to OScam Download Center]]
For enigma2 device with recent openpli you choose **mips-tuxbox** version to download.
Unpack the tar gz and give the bin file exactly the same name of the oscam-... bin file found in openpli at the usr/bin directory. ( /usr/bin/oscam-... )
In openpli, disable the oscam softcam(Setup > SoftCam/CI > Softcam setup... > Select softcam > (press left or right to select)
Then use a ftp client to transfer (overwrite) the installed bin file with the new customized bin file that has exactly the same name.
In openpli, enable the oscam softcam(Setup > SoftCam/CI > Softcam setup... > Select softcam > (press left or right to select)
Done.
Or by telnet:
Download the latest experimental from [[http://download.oscam.to OScam Download Center]]
For enigma2 device with recent openpli you choose **mips-tuxbox** version to download.
Then use a ftp client to transfer the bin file to /usr/bin . (example /usr/bin/oscam-svn5944-mips-tuxbox-webif )
Then connct by ssh / telnet session to your enigma2 tuner and do:
cd /usr/bin
killall oscam
mv oscam-svn5944-mips-tuxbox-webif oscam
chmod 776 oscam
oscam -b
exit
(mv nameofbinfile oscam)
And you're done. This diehard extreme poweruser howto is made with help of users: daniel2005 & theparasol (thanks again folks)
**--------------------------------------------------------------------------------------------------**
----
[[HomePage Back to the PLi® Wiki]] : [[softcamwiki SoftCam Wiki]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]] : [[vuplus VU+]]


Revision [4611]

Edited on 2012-06-12 13:25:15 by arjan_vs [correct oscam binary example names]
Additions:
**saveinithistory = 1**
//Let you see entitlements of cards.//


Revision [4610]

Edited on 2012-06-12 11:25:07 by arjan_vs [correct oscam binary example names]
Additions:
**description = For dreambox lower smartcard slot, for VU+ DUO upper slot**
**description = For dreambox upper smartcard slot, for VU+ DUO lower slot**
If there isn't a second smartcard reader slot, it isn't needed to add. The parts below are shown as examples.
Deletions:
**description = For dreambox lower smartcard slot, for VU+ DUO ... slot**
**description = For dreambox upper smartcard slot, for VU+ DUO ... slot**


Revision [4609]

Edited on 2012-06-12 10:16:11 by arjan_vs [correct oscam binary example names]
Additions:
//The statistics are saved in /tmp/.oscam/stat.//
Deletions:
//The statistics are saved in /tmp/.oscam/lbstat.//


Revision [4608]

Edited on 2012-06-12 10:14:46 by arjan_vs [correct oscam binary example names]
Additions:
**lb_save = 120**
//Write after 120 ECM's the statistics to file.//


Revision [4607]

Edited on 2012-06-12 10:08:07 by arjan_vs [correct oscam binary example names]
Additions:
**lb_mode = 1**
//Fastest card answer first, this means also not sending double ecm request to other cards.//
**lb_savepath = **
//The statistics are saved in /tmp/.oscam/lbstat.//
**lb_stat_cleanup = 12**
//For home users after 12 hours the stats are cleaned. To make sure your statistics doesn't have bad entries.//


Revision [4606]

Edited on 2012-06-12 08:09:31 by arjan_vs [correct oscam binary example names]
Additions:
Users with a M7 Group SECA3 card (the "new" cards of Canal Digitaal, TV Vlaanderen or TéléSAT) are advised to use version 1.20. Because this version is patched for grabbing the right CW's for a SECA2 and SECA3 cards.
====oscam.dvbapi====
In this paragraph two version of oscam.dvbapi are given. The first should be used with version less than revision 6421, denoted as version 1.10. The other, denoted as version 1.20, can be used for revisions from 6421.
===oscam.dvbapi version 1.20===
Can be kept empty, due to code changes that can handle multicrypt on channels with SECA2 and SECA3 encryption.
===oscam.dvbapi version 1.10 for a SECA3 Canal Digital card===
P: 0100::0FAB:070B #NED1 SD
I: 0100::0FAB: #NED1 SD
P: 0100::0FAC:070C #NED2 SD
I: 0100::0FAC: #NED2 SD
P: 0100::0FAD:070D #NED3 SD
I: 0100::0FAD: #NED3 SD
P: 0100::07D4:070B #RTL4 SD
I: 0100::07D4: #RTL4 SD
P: 0100::07D5:070C #RTL5 SD
I: 0100::07D5: #RTL5 SD
P: 0100::0FA2:0709 #SBS6 SD
I: 0100::0FA2 #SBS6 SD
P: 0100::07EF:070F #Veronica SD
I: 0100::07EF: #Veronica SD
P: 0100::1793:070E #Boomerang
I: 0100::1793 #Boomerang
P: 0100::07FF:0714 #Animax
I: 0100::07FF: #Animax
P: 0100::07D6:0711 #RTL7 SD
I: 0100::07D6: #RTL7 SD
P: 0100::0FA3:070A #NET5 SD
I: 0100::0FA3: #NET5 SD
P: 0100::13AA:0134 #NAT GEO WILD
I: 0100::13AA: #NAT GEO WILD
P: 0100::1B67:070A #NAT GEO WILD
I: 0100::1B67: #NAT GEO WILD
P: 0100::17CA:0717 #SBS6HD
I: 0100::17CA: #SBS6HD
P: 0100::5212:0709 #RTL7HD
I: 0100::5212: #RTL7HD
P: 0100::1B7B:070E #NED1HD
I: 0100::1B7B: #NED1HD
P: 0100::1B7C:070D #RTL8HD
I: 0100::1B7C: #RTL8HD
P: 0100::17A7:0726 #Vitaliteit
I: 0100::1B7C: #Vitaliteit
P: 0100::17C0:0716 #NED2HD
I: 0100::17C0: #NED2HD
P: 0100::51D6:0711 #NED3HD
I: 0100::51D6: #NED3HD
P: 0100::1B6C:070B #RTL4HD
I: 0100::1B6C: #RTL4HD
P: 0100::5217:070A #RTL5HD
I: 0100::5217: #RTL5HD
P: 0100::07F3:0710 #RTL8
I: 0100::07F3: #RTL8
P: 0100::521c:070B #NET5HD
I: 0100::521c: #NET5HD
P: 0100::522b:0711 #Veronica HD
P: 0100::522b:070F #Veronica/disneyXD
I: 0100::522b: #Veronica/disneyXD
P: 0100::1784:070B #Consumenten TV 24
I: 0100::1784: #Consumenten TV 24
P: 0100::177A:0709 #Geschiedenis 24
I: 0100::177A: #Geschiedenis 24
P: 0100::177F:070A #Holland Doc 24
I: 0100::177F: #Holland Doc 24
P: 0100::1789:070C #Humor/NostalgieNet
I: 0100::1789: #Humor/NostalgieNet
P: 0100::5146:070E #AT5
I: 0100::5146: #AT5
P: 0100::5142:070A #Limburg
I: 0100::5142: #Limburg
P: 0100::5144:070C #TV WEST
I: 0100::5144: #TV WEST
P: 0100::51DB:0712 #FILM1 HD
I: 0100::51DB: #FILM1 HD
P: 0100::07E9:0718 #Eurosport
I: 0100::07E9: #Eurosport
P: 0100::13B1:00B5 #Eurosport HD
I: 0100::13B1: #Eurosport HD
P: 0100::13B9:00B5 #Eurosport HD dut
I: 0100::13B9: #Eurosport HD dut
P: 0100::0041:1FDA #Eurosport 2
I: 0100::0041: #Eurosport 2
P: 0100::3335:01CF #ESPN America
I: 0100::3335: #ESPN America
P: 0100::2525:15DB #Motors TV
I: 0100::2525: #Motors TV
P: 0100::219F:15CB #Y&S;
I: 0100::219F: #Y&S;
P: 0100::1B71:070C #BRAVA HD
I: 0100::1B71: #BRAVA HD
P: 0100::1F47:16D1 #MEzzo
I: 0100::1F47: #MEzzo
P: 0100::6FB8:07DF #MTV HD
I: 0100::6FB8: #MTV HD
P: 0100::6FF3:190E #MTV ROCKS
I: 0100::6FF3: #MTV ROCKS
P: 0100::6FFF:190F #MTV
I: 0100::6FFF: #MTV
P: 0100::31F9:0715 #TV Oranje
I: 0100::31F9: #TV Oranje
P: 0100::6FF0:1911 #VH1
I: 0100::6FF0: #VH1
P: 0100::6FF1:1910 #VH1 Classic
I: 0100::6FF1: #VH1 Classic
P: 0100::1B62:0709 #Discovery HD
I: 0100::1B62: #Discovery HD
P: 0100::13B0:00B6 #History HD
I: 0100::13B0: #History HD
P: 0100::07F4:0715 #Comedy Central
I: 0100::07F4: #Comedy Central
P: 0100::17A7:0726 #Vitaliteit
I: 0100::17A7: #Vitaliteit
P: 0100::0046:1FE7 #Alpengluhen
I: 0100::0046: #NED1 SD
P: 0100::17AC:0713 #BiB
I: 0100::17AC: #Bib
P: 0100::07E4:070D #Animal Planet
I: 0100::07E4: #Animal Planet
P: 0100::07DF:070A #Discovery
I: 0100::07DF: #Discovery
P: 0100::1798:070F #Discovery Science
I: 0100::1798: #Discovery Science
P: 0100::179D:0710 #Discovery Travel & Living
I: 0100::179D: #Discovery Travel & Living
P: 0100::0FAF:0713 #NGC
I: 0100::0FAF: #NGC
P: 0100::13c0:0EC2 #Travel Channel HD
I: 0100::13c0: #Travel Channel HD
P: 0100::0FAE:0716 #Nickelodeon
I: 0100::0FAE: #Nickelodeon
P: 0100::17CC:0719 #EDL1 HD
I: 0100::17CC: #EDL1 HD
P: 0100::51C7:070E #EDL2
I: 0100::51C7: #EDL2
P: 0100::6FB8:07DF #MTV Live HD
I: 0100::6FB8: #MTV Live HD
P: 0100::51E0:0713 #Sport1LiveHD
I: 0100::51E0: #Sport1LiveHD
P: 0100::51C2:070D #Sport1Golf
I: 0100::51C2: #Sport1Golf
P: 0100::51BD:070C #Sport1Tennis
I: 0100::51BD: #Sport1Tennis
P: 0100::0808:0745 #NL-Radio2
I: 0100::0808: #NL-Radio2
P: 0100::0809:0746 #NL-3FM
I: 0100::0809: #NL-3FM
P: 0100::080A:0747 #NL-Radio4
I: 0100::080A: #NL-Radio4
P: 0100::0FBE:0718 #BNR nieuwsradio
I: 0100::0FBE: #BNR nieuwsradio
P: 0100::5221:070C #Een HD NL kaart
#P: 0100::5221:0720 #Een HD TVV
I: 0100::5221: #Een HD
P: 0100::5226:070D #Ketnet HD NL Kaart
#P: 0100::5226:0721 #Ketnet HD TVV
I: 0100::5226: #Ketnet HD
P: 0100:00006A:31E7:070D #Een SD NL kaart
#P: 0100:00006C:31E7: #Een SD
I: 0100::31E7: #Een SD
P: 0100:00006A:31E8:070E #Ketnet SD NL kaart
#P: 0100:00006C:31E8: #Ketnet SD
I: 0100::31E8: #Ketnet SD
==oscam.dvbapi differences with TV Vlaanderen card==
Change last part of oscam.dvbapi into:
#P: 0100::5221:070C #Een HD NL kaart
P: 0100::5221:0720 #Een HD TVV
I: 0100::5221: #Een HD
#P: 0100::5226:070D #Ketnet HD NL Kaart
P: 0100::5226:0721 #Ketnet HD TVV
I: 0100::5226: #Ketnet HD
#P: 0100:00006A:31E7:070D #Een SD NL kaart
P: 0100:00006C:31E7: #Een SD
I: 0100::31E7: #Een SD
#P: 0100:00006A:31E8:070E #Ketnet SD NL kaart
P: 0100:00006C:31E8: #Ketnet SD
I: 0100::31E8: #Ketnet SD


Revision [4605]

Edited on 2012-06-11 11:16:33 by arjan_vs [correct oscam binary example names]
Additions:
//The user is only allowed to access the readers 1 until 4.//
Deletions:
//The user is only allowed to access the readers 1 until 4./


Revision [4604]

Edited on 2012-06-10 15:55:04 by arjan_vs [correct oscam binary example names]
Additions:
//The user is only allowed to access the readers 1 until 4./
**pwd = passwordmonitor**
**allowedprotocols = cccam**
//It is only allowed to logon with the CCcam protocol.//
**cccmaxhops = 1**
//The user is only allowed to get ecm from local readers and readers connected to boxes in your lan (1 hop away).//
Deletions:
//Which readers do you want to access with your dreambox?//


Revision [4603]

Edited on 2012-06-10 15:48:36 by arjan_vs [correct oscam binary example names]
Additions:
====oscam.user====
**[account]**
//Same username as in oscam.conf in the [dvbapi] section.//
**pwd = **
//Line with pwd is needed, but should be set blank.//
**group = 1,2,3,4**
//Which readers do you want to access with your dreambox?//
**uniq = 3**
//Only the last and one instance is allowed of this user.//
**monlevel = 0**
//Monitoring is not allowed with this account.//
//The settopbox is allowed to send EMM towards the readers, to update the entitlements of the cards.//
**[account]**
**user = usermonitor**
//Account name of the monitor//
**pwd = password**
//Password for the user monitor account.//
**group = 1,2,3,4**
//Allowed groups to monitor/access.//
**uniq = 1**
//Only the one instance is allowed of this user.//


Revision [4602]

Edited on 2012-06-10 14:58:55 by arjan_vs [correct oscam binary example names]
Additions:
====oscam.server====
**[reader]**
**label = first_internal_reader**
**description = For dreambox lower smartcard slot, for VU+ DUO ... slot**
**protocol = internal**
**device = /dev/sci0**
**detect = cd**
**group = 1**
**emmcache = 1,1,0**
//Makes sure that emm's are cached and written. The emm's are not logged.//
**dropbadcws = 1**
//Do not answer bad cw's.//
**ratelimitecm = 4**
//Only for M7 SECA3 cards (Canal Digitaal, TV Vlaanderen and Telesat), maximum allowable channels to watch are 4 in a certain time period.//
**ratelimitseconds = 11**
//This time period after you can change the 4 requests into 4 different requests. For M7 SECA3 cards, this should vary between 9 and 11 seconds, with 11 seconds as safest choice.//
**[reader]**
**label = second_internal_reader**
**description = For dreambox upper smartcard slot, for VU+ DUO ... slot**
**protocol = internal**
**device = /dev/sci1**
**detect = cd**
**group = 2**
**emmcache = 1,1,0**
**dropbadcws = 1**
**ratelimitecm = 4**
**ratelimitseconds = 11**
**[reader]**
**label = external_reader**
**description = External reader connected to serial or USB port of box, such as smargo's or mouse**
**protocol = mouse**
**device = /dev/ttyUSB0**
//Example for a smargo or mouse connected to USB port with ftdi_sio kernel driver.//
**detect = cd**
**group = 3**
**emmcache = 1,1,0**
**dropbadcws = 1**
**ratelimitecm = 4**
**ratelimitseconds = 11**
**[reader]**
**label = lan_cccam**
**description = CCcam LAN connection**
**protocol = cccam**
//The corresponding user definition is given in oscam.user paragraph.//
**device = 192.168.0.x,12000**
//Connect to server 192.168.0.x (or your local server box) at port number 12000.//
**user = username**
//Change into the right user name.//
**password = password**
//Change into the right password.//
**group = 4**
**cccversion = 2.3.0**
//Latest known version of CCcam.//
**ccckeepalive = 1**
//Makes sure the server is not disconnected, due to idleness.//


Revision [4601]

Edited on 2012-06-10 14:17:19 by arjan_vs [correct oscam binary example names]
Additions:
**[global]**
**logfile = /tmp/.oscam/oscam.log**
//This is where the log file is written, in case it is enabled.//
**disablelog = 1**
//Log file is disabled, just to make sure your box is not wasting flash space.//
**nice = -1**
//Make sure the program gets enough priority by the processor.//
**dropdups = 1**
//A user is only allowed to login 1 time.//


Revision [4600]

Edited on 2012-06-10 13:45:36 by arjan_vs [correct oscam binary example names]
Additions:
**au = 1**
Deletions:
au = 1


Revision [4599]

Edited on 2012-06-10 13:45:05 by arjan_vs [correct oscam binary example names]
Additions:
**port = 16500**
**nocrypt = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0–172.31.255.255,192.168.0.0-192.168.255.255**
**hideclient_to = 15**
**monlevel = 4**
**appendchaninfo = 1**
//Change hexadecimal channel number into a channel name.//
**[cccam]**
**port = 12000**
**reshare = 1**
**version = 2.3.0**
**[dvbapi]**
**enabled = 1**
**boxtype = dreambox**
**user = dvbapiau**
**httpport = 16200**
**httprefresh = 30**
**httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0–172.31.255.255,192.168.0.0-192.168.255.255**
**httphideidleclients = 1**
Deletions:
port = 16500
nocrypt = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0–172.31.255.255,192.168.0.0-192.168.255.255
hideclient_to = 15
monlevel = 4
appendchaninfo = 1
[cccam]
port = 12000
reshare = 1
version = 2.3.0
enabled = 1
boxtype = dreambox
user = dvbapiau
httpport = 16200
httprefresh = 30
httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0–172.31.255.255,192.168.0.0-192.168.255.255
httphideidleclients = 1


Revision [4598]

Edited on 2012-06-10 13:42:10 by arjan_vs [correct oscam binary example names]
Additions:
In the next paragraphs the minimal content of the configuration files are given. With this config you can decrypt channels on your settopbox, if a smartcard is locally available. Further, an example is given to share your local card to another settopbox in your LAN. The cardsharing protocol used is the same as that of CCcam.
This explanation assumes you know how to edit files on your settopbox.
**Further it is assumed, that your settopbox is behind a firewall!**
The [[http://streamboard.gmc.to/wiki/index.php/OSCam/en OScam wiki]] gives a detailed description of all parameters.
port = 16500
nocrypt = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0–172.31.255.255,192.168.0.0-192.168.255.255
//You are allowed to monitor from localhost, and all LAN with home ip.//
hideclient_to = 15
//Hide clients from monitor or webinterface after 15 seconds idleness.//
monlevel = 4
appendchaninfo = 1
[cccam]
port = 12000
reshare = 1
//Only your other local boxes are allowed to access your cards.//
version = 2.3.0
//As far as this wiki knows, latest CCcam version is 2.3.0.//
enabled = 1
au = 1
//Makes sure your card is updated with emm's.//
boxtype = dreambox
user = dvbapiau
httpport = 16200
httprefresh = 30
//Every 30 seconds a refresh.//
httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0–172.31.255.255,192.168.0.0-192.168.255.255
//You are allowed to access the webinterface from localhost, and all LAN with home ip.//
httphideidleclients = 1
//Do not show clients/users, who are not requesting ecm's.//
Deletions:
In the next paragraphs the minimal content of the configuration files are given.


Revision [4597]

Edited on 2012-06-10 13:05:07 by arjan_vs [correct oscam binary example names]
Additions:
**Update:** OScam-experimental is updated with the help of serveral OpenPli forum users. Since say version OSCAM 1.20 build #6458, OScam runs out of the box with Canal Digitaal smartcards. Yeah awesome!
The following four files need to be installed in configuration directories to let OScam function normally:
- oscam.conf
- oscam.server
- oscam.user
- oscam.dvbapi (in some cases)
In the next paragraphs the minimal content of the configuration files are given.
====oscam.conf====


Revision [4596]

Edited on 2012-06-10 12:32:28 by arjan_vs [correct oscam binary example names]
Additions:
- oscam-unstable as 1.10 Open Source Softcam (revision 6089, last 1.10 version)
Deletions:
- oscam-unstable as 1.10 Open Source Softcam (revision 6089)
Press **Menu** on remote control and navigate to: **Plugins > DownloadPlugins > softcams > oscam-experimental**
Install the oscam-experimental plugin.


Revision [4595]

Edited on 2012-06-10 12:22:42 by arjan_vs [correct oscam binary example names]
Additions:
- [[http://streamboard.gmc.to/wbb2/portal.php Click here to go to official developers board.]]
- [[http://streamboard.gmc.to/wiki/index.php/OSCam/en Click here to go to official OScam wiki.]]
- [[http://streamboard.gmc.to:8001/timeline Click here to see an overview of the last changes.]]
Deletions:
- [[http://streamboard.gmc.to/wbb2/portal.php Click here to go to official developers board ]].
- [[http://streamboard.gmc.to/wiki/index.php/OSCam/en Click here to go to official OScam wiki]].


Revision [4594]

Edited on 2012-06-10 12:14:02 by arjan_vs [correct oscam binary example names]
Additions:
OScam is a softcam, software to be used to decrypt digital television channels on a settopbox (receiver), as an alternative for a conditional access module (CAM). OScam is, compared with other softcams (CCcam, mgcamd, etc.), open source. Hence, the name Open Source Conditional Access Module (OScam). OScam is based on the not so well known softcam MpCS. The main features of OSCam are next to its softcam capabilities, that it is able to function as a cardserver.
- [[http://download.oscam.to/ Click here to go to OScam Download Center]]
Cutting edge binaries for the following brands are (available at OScam Download Center):
OpenPLi has six different OScam Plugins available for enigma2 boxes:
- oscam-stable as 1.10 Open Source Softcam (revision 5741)
- oscam-stable-cs as 1.10 Open Source Softcam only as cardserver
- oscam-unstable as 1.10 Open Source Softcam (revision 6089)
- oscam-unstable-cs as 1.10 Open Source Softcam only as cardserver
- oscam-experimental as 1.20 Open Source Softcam (latest revision)
- oscam-experimental-cs as 1.20 Open Source Softcam only as cardserver
These can be installed on your enigma2 OpenPLi box by pressing **Menu** on remote control and navigate to: **Plugins > DownloadPlugins > softcams > oscam-experimental**
for installing the oscam-experimental plugin. The other OScam plugins can be installed on a similar way.
The configuration files are stored in either of one of these directories on the box:
- /etc/tuxbox/config/oscam-stable/
- /etc/tuxbox/config/oscam-unstable/
- /etc/tuxbox/config/oscam-experimental/
Deletions:
OSCam is a softcam, software to be used to decrypt digital television channels on a settopbox (receiver), as an alternative for a conditional access module (CAM). OSCam is, compared with other softcams (CCcam, mgcamd, etc.), open source. Hence, the name Open Source Conditional Access Module (OSCam). OSCam is based on the not so well known softcam MpCS. The main features of OSCam are next to its softcam capabilities, that it is able to function as a cardserver.
- [[http://download.oscam.to/ Click here to go to OScam Download Center]] (**mips-tuxbox** is for our enigma2 tuner)
Cutting edge binaries for the following brands are:


Revision [4593]

Edited on 2012-06-10 11:32:09 by arjan_vs [correct oscam binary example names]
Additions:
======OScam, Open Source softcam======
OSCam is a softcam, software to be used to decrypt digital television channels on a settopbox (receiver), as an alternative for a conditional access module (CAM). OSCam is, compared with other softcams (CCcam, mgcamd, etc.), open source. Hence, the name Open Source Conditional Access Module (OSCam). OSCam is based on the not so well known softcam MpCS. The main features of OSCam are next to its softcam capabilities, that it is able to function as a cardserver.
=====OScam information on the web=====
Their is a official website of the developers of OScam:
- [[http://streamboard.gmc.to/wbb2/portal.php Click here to go to official developers board ]].
Their is also a user support website:
Cutting edge binaries for the following brands are:
- powerpc-tuxbox-old = enigma1 DM500 or DM500-S
- powerpc-tuxbox = enigma1 DM600, DM7000, DM7020
- mips-tuxbox-oe2.0 = enigma2 DM800, DM800, DM7025
- i386-pc-linux = normal intel linux pc
- x86_64-pc-linux = linux pc with 64 bit or AMD processor
=====OScam howto=====
Deletions:
====OScam, Open Source softcam====
(It's amazing!)
====OScam howto: ====
Their is a official website of OScam:
- [[http://streamboard.gmc.to/wbb2/portal.php Click here to go to official website]].
I also found kind of "new" official OScam website:


Revision [4567]

Edited on 2012-02-29 16:43:43 by J3r03n5ky [updated because oscam-experimental update]
Additions:
Press **Menu** on remote control and navigate to: **Plugins > DownloadPlugins > softcams > oscam-experimental**
You only need to edit the **oscam.server** file if it doesn't work after install/restart. So the 4 files that are offered here are only nessesary with older OScams.
This example is ready for Dutch smart card of Canal Digitaal (not nessesary with oscam-experimental).
Deletions:
Press **Menu** on remote control and navigate to: **Plugins > DownloadPlugins > softcams > oscam-stable (or experimental)**
You only need to edit the oscam.server file if it doesn't work after install/restart. So the 4 files that are offered here are only nessesary with older OScams.
**Update:** These 4 oscam files are updated(9-9-2011), because CanalDigitaal users had a issue with some SD channels who give a black screen. Issue is solved (thank you user Mika-nl) with use of I lines in oscam.dvbapi file. If oscam will be fixed, then these I lines are not nessesary anymore for CanalDigitaal users who watch Dutch SD channels.
This example is ready for Dutch smart card of Canal Digitaal.


Revision [4566]

Edited on 2012-02-29 16:00:22 by J3r03n5ky [updated because oscam-experimental update]
Additions:
Install the oscam-experimental plugin.
**Update:** OScam-experimental is updated with help of serveral OpenPli forum users. Since say version OSCAM 1.20-unstable_svn build #6458, OScam runs out of the box with Canal Digitaal smartcards. Yeah awesome!
You only need to edit the oscam.server file if it doesn't work after install/restart. So the 4 files that are offered here are only nessesary with older OScams.
Download these 4 files when not using oscam-experimental(right click save link as): [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_stable_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]] + [[http://www.pli-images.org/files/wiki/013571_oscam.user oscam.user]]. Remove the numbers/names in front of downloaded file names, so that filenames are exactly the same as written here.
Deletions:
Install the oscam-stable (or experimental) plugin.
Then download these 4 files (right click save link as): [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_stable_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]] + [[http://www.pli-images.org/files/wiki/013571_oscam.user oscam.user]]. Remove the numbers/names in front of downloaded file names, so that filenames are exactly the same as written here.


Revision [4549]

Edited on 2012-02-05 13:48:30 by theparasol [updated because oscam-experimental update]
Deletions:
mhz = 500
cardmhz = 357
mhz = 500
cardmhz = 357
mhz = 500
cardmhz = 357


Revision [4548]

Edited on 2012-02-05 13:46:55 by theparasol [updated because oscam-experimental update]
Additions:
mhz = 357
cardmhz = 500
mhz = 357
cardmhz = 500


Revision [4533]

Edited on 2011-10-31 21:08:11 by J3r03n5ky [update original oscam links (now working)]
Additions:
- [[http://streamboard.gmc.to/wbb2/portal.php Click here to go to official website]].
- [[http://streamboard.gmc.to/wiki/index.php/OSCam/en Click here to go to official OScam wiki]].
Deletions:
- [[http://77.79.4.122/wbb2/portal.php Click here to go to official website]].
- [[http://77.79.4.122/wiki/index.php/OSCam/en Click here to go to official OScam wiki]].


Revision [4476]

Edited on 2011-10-16 22:33:15 by webmaster [Fixed UTF-8 issues]
Additions:
P: 0100:00006D # T�l�sat
Deletions:
{{googletranslate}}
P: 0100:00006D # Télésat


Revision [4300]

Edited on 2011-09-10 18:29:24 by theparasol [Fixed UTF-8 issues]
Additions:
Be sure to use a oscam unstable 1.20 rev 5941 or newer


Revision [4299]

Edited on 2011-09-10 17:48:18 by theparasol [Fixed UTF-8 issues]
Additions:
New mapping method working for BE and NL seca cards
Make sure you are using dvbapi request mode 1 / try all CAID simulataneously
I: 0100 #Oud seca NL+Vlaanderen
I: 0500 #Viaccess op vlaamse zenders
I: 0622 #Bleh... irdeto codering
M: 1817:00006A 0100:00006A #NL Pakket
M: 1818:00006C 0100:00006C #Vlaams Pakket
P: 1817:00006A #NL Pakket
P: 1818:00006C #Vlaams Pakket


Revision [4298]

Edited on 2011-09-10 17:47:21 by Jeroensky [add minimal oscam.dvbapi for experimental with changed dvb-api]
Additions:
If you use **OScam-experimental**, then use this [[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] and change these settings to let this list work because of oscam bug: OScam webif(webbrowser) > Configuration > DVB-api > Request mode: try all caids simultaneously > save (thanks to users Fretsat, Erik Slagter, theparasol, zeeteefje)
Deletions:
If you use **OScam-experimental**, then use this [[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] and change these settings to let this list work because of oscam bug: OScam webif(webbrowser) > Configuration > DVB-api > Request mode: try all caids simultaneously > save


Revision [4297]

Edited on 2011-09-10 17:42:07 by Jeroensky [add minimal oscam.dvbapi for experimental with changed dvb-api]
Additions:
If you use **OScam-experimental**, then use this [[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] and change these settings to let this list work because of oscam bug: OScam webif(webbrowser) > Configuration > DVB-api > Request mode: try all caids simultaneously > save
Deletions:
If you use **OScam-experimental**, then use this [[[[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] and change these settings to let this list work because of oscam bug: OScam webif(webbrowser) > Configuration > DVB-api > Request mode: try all caids simultaneously > save


Revision [4296]

Edited on 2011-09-10 17:22:29 by Jeroensky [add minimal oscam.dvbapi for experimental with changed dvb-api]
Additions:
Then download these 4 files (right click save link as): [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_stable_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]] + [[http://www.pli-images.org/files/wiki/013571_oscam.user oscam.user]]. Remove the numbers/names in front of downloaded file names, so that filenames are exactly the same as written here.
Deletions:
Then download these 4 files (right click save link as): [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_stable_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]] + [[http://www.pli-images.org/files/wiki/013571_oscam.user oscam.user]]. Remove the numbers in front of downloaded file names, so that filenames are exactly the same as written here.


Revision [4295]

Edited on 2011-09-10 17:20:36 by Jeroensky [add minimal oscam.dvbapi for experimental with changed dvb-api]
Additions:
Then download these 4 files (right click save link as): [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_stable_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]] + [[http://www.pli-images.org/files/wiki/013571_oscam.user oscam.user]]. Remove the numbers in front of downloaded file names, so that filenames are exactly the same as written here.
This example is ready for Dutch smart card of Canal Digitaal.
If you use **OScam-experimental**, then use this [[[[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] and change these settings to let this list work because of oscam bug: OScam webif(webbrowser) > Configuration > DVB-api > Request mode: try all caids simultaneously > save
To find out what you need to fill in for your sat tv operator smart card info [[http://streamboard.gmc.to:8001/wiki/CardsList check here]].
Deletions:
Then download these 4 files (right click save link as): [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]] + [[http://www.pli-images.org/files/wiki/013571_oscam.user oscam.user]]. Remove the numbers in front of downloaded file names, so that filenames are exactly the same as written here.
This example is ready for Dutch smart card of Canal Digitaal. To find out what you need to fill in for your sat tv operator smart card info [[http://streamboard.gmc.to:8001/wiki/CardsList check here]].


Revision [4281]

Edited on 2011-09-09 13:37:42 by Jeroensky [oscam.dvbapi updated for CanalDigitaal users who view Dutch SD channels.]
Additions:
**Update:** These 4 oscam files are updated(9-9-2011), because CanalDigitaal users had a issue with some SD channels who give a black screen. Issue is solved (thank you user Mika-nl) with use of I lines in oscam.dvbapi file. If oscam will be fixed, then these I lines are not nessesary anymore for CanalDigitaal users who watch Dutch SD channels.
Deletions:
**Update:** These 4 oscam files are updated(8-9-2011), because CanalDigitaal users had a issue with some SD channels who give a black screen. Issue is almost solved (only a few sd channels and management update is a issue, but will be solved in a OScam update if i'm right informed).


Revision [4280]

Edited on 2011-09-08 22:16:06 by Jeroensky [added : Howto for the extreme poweruser OScam diehard]
Additions:
(mv nameofbinfile oscam)


Revision [4279]

Edited on 2011-09-08 21:41:13 by Jeroensky [added : Howto for the extreme poweruser OScam diehard]
Additions:
Then press **Menu** on remote control and navigate to: **Setup > SoftCam/CI > Softcam setup... > Select softcam >** (press left or right to select) **oscam-stable (or oscam-experimental) >** press **green button**(ok).
**Howto for the extreme poweruser OScam diehard** (only for experienced users)
To customize your OScam version:
Download the latest experimental from [[http://download.oscam.to OScam Download Center]]
For enigma2 device with recent openpli you choose **mips-tuxbox** version to download.
Unpack the tar gz and give the bin file exactly the same name of the oscam-... bin file found in openpli at the usr/bin directory. ( /usr/bin/oscam-... )
In openpli, disable the oscam softcam(Setup > SoftCam/CI > Softcam setup... > Select softcam > (press left or right to select)
Then use a ftp client to transfer (overwrite) the installed bin file with the new customized bin file that has exactly the same name.
In openpli, enable the oscam softcam(Setup > SoftCam/CI > Softcam setup... > Select softcam > (press left or right to select)
Done.
Or by telnet:
Download the latest experimental from [[http://download.oscam.to OScam Download Center]]
For enigma2 device with recent openpli you choose **mips-tuxbox** version to download.
Then use a ftp client to transfer the bin file to /usr/bin . (example /usr/bin/oscam-svn5944-mips-tuxbox-webif )
Then connct by ssh / telnet session to your enigma2 tuner and do:
cd /usr/bin
killall oscam
mv oscam-svn5944-mips-tuxbox-webif oscam
chmod 776 oscam
oscam -b
exit
And you're done. This diehard extreme poweruser howto is made with help of users: daniel2005 & theparasol (thanks again folks)
Deletions:
Then press **Menu** on remote control and navigate to: **Setup > SoftCam/CI > Softcam setup... > Select softcam >** (press left or right to get) **oscam-stable (or oscam-experimental) >** press **green button**(ok).


Revision [4278]

Edited on 2011-09-08 19:52:40 by Jeroensky [Changed username to localhost in oscam.user (like in oscam.conf [dvbapi])]
Additions:
**Update:** These 4 oscam files are updated(8-9-2011), because CanalDigitaal users had a issue with some SD channels who give a black screen. Issue is almost solved (only a few sd channels and management update is a issue, but will be solved in a OScam update if i'm right informed).
Deletions:
**Update:** These 4 oscam files are updated(8-9-2011), because CanalDigitaal users had a issue with some SD channels who give a black screen. Issue solved (only management update is a issue, but will be solved in a OScam update if i'm right informed).


Revision [4273]

Edited on 2011-09-08 16:49:58 by Jeroensky [Changed username to localhost in oscam.user (like in oscam.conf [dvbapi])]
Additions:
- [[http://download.oscam.to/ Click here to go to OScam Download Center]] (**mips-tuxbox** is for our enigma2 tuner)
Deletions:
- [[http://download.oscam.to/ Click here to go to OScam Download Center]] (**mips-tuxbox-oeXX** is for our enigma2 tuner)


Revision [4268]

Edited on 2011-09-08 15:00:11 by Jeroensky [Changed username to localhost in oscam.user (like in oscam.conf [dvbapi])]
Additions:
**Update:** These 4 oscam files are updated(8-9-2011), because CanalDigitaal users had a issue with some SD channels who give a black screen. Issue solved (only management update is a issue, but will be solved in a OScam update if i'm right informed).
Deletions:
**Update:** These 3 oscam files are updated(7-9-2011), because CanalDigitaal users had a issue with some SD channels who give a black screen. Issue solved (only management update is a issue, but will be solved in a OScam update if i'm right informed).


Revision [4267]

Edited on 2011-09-08 14:53:49 by Jeroensky [Changed username to localhost in oscam.user (like in oscam.conf [dvbapi])]
Additions:
Then download these 4 files (right click save link as): [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]] + [[http://www.pli-images.org/files/wiki/013571_oscam.user oscam.user]]. Remove the numbers in front of downloaded file names, so that filenames are exactly the same as written here.
==**oscam.user** :==
I changed the oscam.user file. The username is now **localhost** same as in oscam.conf [dvbapi] .
Now if you edited **oscam.conf** + **oscam.dvbapi** + **oscam.server** correctly, it's time to upload them with the **oscam.user** file to your enigma2 tuner with a ftp client in the directory:
Deletions:
Then download these 3 files (right click save link as): [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]]. Remove the numbers in front of downloaded file names, so that filenames are exactly the same as written here.
Now if you edited oscam.conf + oscam.dvbapi + oscam.server correctly, it's time to upload them by ftp to your enigma2 tuner in the directory:


Revision [4266]

Edited on 2011-09-08 00:32:12 by Jeroensky [prefer to use oscam-stable, but also info for oscam-experimental]
Deletions:
===/etc/tuxbox/config/oscam-experimental/===


Revision [4265]

Edited on 2011-09-07 23:56:58 by Jeroensky [prefer to use oscam-stable, but also info for oscam-experimental]
Additions:
**Update:** These 3 oscam files are updated(7-9-2011), because CanalDigitaal users had a issue with some SD channels who give a black screen. Issue solved (only management update is a issue, but will be solved in a OScam update if i'm right informed).
Deletions:
**Update:** These 3 oscam files are updated(7-9-2011), because CanalDigitaal users had a issue with SD channels who give a black screen when their is a HD version of it. Issue solved (only management update is a issue, but will be solved in a OScam update if i'm right informed).


Revision [4264]

Edited on 2011-09-07 23:54:50 by Jeroensky [prefer to use oscam-stable, but also info for oscam-experimental]
Additions:
**Update:** These 3 oscam files are updated(7-9-2011), because CanalDigitaal users had a issue with SD channels who give a black screen when their is a HD version of it. Issue solved (only management update is a issue, but will be solved in a OScam update if i'm right informed).
Deletions:
**Update:** These 3 oscam files will be updated, because CanalDigitaal users have a issue with SD channels who give a black screen when their is a HD version of it. daniel2005 is working on this, he get example files of me, so hope he can work it out, thanks for your help daniel2005).


Revision [4263]

Edited on 2011-09-07 18:40:03 by Jeroensky [prefer to use oscam-stable, but also info for oscam-experimental]
Additions:
**Update:** These 3 oscam files will be updated, because CanalDigitaal users have a issue with SD channels who give a black screen when their is a HD version of it. daniel2005 is working on this, he get example files of me, so hope he can work it out, thanks for your help daniel2005).
Deletions:
*Update:* These 3 oscam files will be updated, because CanalDigitaal users have a issue with SD channels who give a black screen when their is a HD version of it. daniel2005 is working on this, he get example files of me, so hope he can work it out, thanks for your help daniel2005).


Revision [4262]

Edited on 2011-09-07 18:39:09 by Jeroensky [prefer to use oscam-stable, but also info for oscam-experimental]
Additions:
*Update:* These 3 oscam files will be updated, because CanalDigitaal users have a issue with SD channels who give a black screen when their is a HD version of it. daniel2005 is working on this, he get example files of me, so hope he can work it out, thanks for your help daniel2005).


Revision [4261]

Edited on 2011-09-07 18:07:45 by Jeroensky [prefer to use oscam-stable, but also info for oscam-experimental]
Additions:
This because we have different hardware, different sat tv providers, and different home networks. So maybe we can give examples.
Press **Menu** on remote control and navigate to: **Plugins > DownloadPlugins > softcams > oscam-stable (or experimental)**
Install the oscam-stable (or experimental) plugin.
===/etc/tuxbox/config/oscam-stable/ (or if using experimental: /etc/tuxbox/config/oscam-experimental/ )===
Then press **Menu** on remote control and navigate to: **Setup > SoftCam/CI > Softcam setup... > Select softcam >** (press left or right to get) **oscam-stable (or oscam-experimental) >** press **green button**(ok).
Deletions:
This because we have different hardware, different sat tv providers, and different homenetworks. So maybe we can give examples.
Press **Menu** on remote control and navigate to: **Plugins > DownloadPlugins > softcams > oscam-experimental**
Install the oscam-experimental plugin.
Then press **Menu** on remote control and navigate to: **Setup > SoftCam/CI > Softcam setup... > Select softcam >** (press left or right to get) **oscam-experimental >** press **green button**(ok).


Revision [4260]

Edited on 2011-09-06 20:50:43 by Jeroensky [Add official streamboadwebsite url with ip address because of DNS issue]
Additions:
- [[http://77.79.4.122/wbb2/portal.php Click here to go to official website]].
Deletions:
- [[http://77.79.4.122 Click here to go to official website]].


Revision [4259]

Edited on 2011-09-06 20:49:07 by Jeroensky [Add official streamboadwebsite url with ip address because of DNS issue]
Additions:
- [[http://77.79.4.122 Click here to go to official website]].
- [[http://77.79.4.122/wiki/index.php/OSCam/en Click here to go to official OScam wiki]].
Deletions:
- [[http://www.streamboard.gmc.to Click here to go to official website]].
- [[http://www.streamboard.gmc.to/wiki/index.php/OSCam/en Click here to go to official OScam wiki]].


Revision [4258]

Edited on 2011-09-03 01:39:59 by Jeroensky [reminder: streamboard.gmc.to links are back online after 3-9-11]
Additions:
Update of user theparasol: __If (so when it works ok, then don't change)__ your seca3 v10 smartcard don't update properly, then check [[http://www.pli-images.org/getfile.php?type=a&file_id=11912 this PDF file]].
Deletions:
Update of user theparasol: __If your seca3 v10 smartcard don't update properly__, then check [[http://www.pli-images.org/getfile.php?type=a&file_id=11912 this PDF file]].


Revision [4257]

Edited on 2011-09-03 01:23:26 by Jeroensky [reminder: streamboard.gmc.to links are back online after 3-9-11]
Additions:
Update of user theparasol: __If your seca3 v10 smartcard don't update properly__, then check [[http://www.pli-images.org/getfile.php?type=a&file_id=11912 this PDF file]].
# first create the needed directory's and see if there is usb stick ,cf or hdd
cwlogdir = /media/hdd/oscam
httpcss = /etc/tuxbox/config/proflinux_ddcstyle.css
Deletions:
cwlogdir = /var/log/oscam/cw
httpcss = /var/tuxbox/config/proflinux_ddcstyle.css


Revision [4256]

Edited on 2011-09-03 01:06:13 by WanWizard [reminder: streamboard.gmc.to links are back online after 3-9-11]
Additions:
aeskeys = <your aes keys here>
Deletions:
aeskeys = 0500@030B00:439726EBB6A939A456C05FF6AA606C43,A79AC0DBEC9C9251D1915F058862AF26,EF3CB8D36A862097A33FC47101041BE3


Revision [4255]

Edited on 2011-09-03 00:10:54 by Jeroensky [reminder: streamboard.gmc.to links are back online after 3-9-11]
Additions:
Reboot and you can enjoy your working smartcard/choosen signal provider (tntsat example is made by user Fretsat, others by user daniel2005)
Deletions:
Reboot and you can enjoy TNTsat (this example is made by user Fretsat)


Revision [4254]

Edited on 2011-09-02 13:59:41 by Jeroensky [reminder: streamboard.gmc.to links are back online after 3-9-11]
Additions:
**oscam.conf**
**oscam.server**
**oscam.user**
**oscam.services**
**oscam.dvbapi**
Deletions:
oscam.conf
oscam.server
oscam.user
oscam.services
oscam.dvbapi


Revision [4253]

Edited on 2011-09-02 13:58:04 by Jeroensky [reminder: streamboard.gmc.to links are back online after 3-9-11]
Additions:
Examples from user daniel2005: (many thanks for this info)
You can replace these lines
by
Deletions:
Examples from user daniel2005
Men mag volgende lijven vervangen
door


Revision [4252]

Edited on 2011-09-02 13:55:16 by Jeroensky [reminder: streamboard.gmc.to links are back online after 3-9-11]
Additions:
Examples from user daniel2005
oscam.conf
[global]
usrfile = /media/hdd/oscam/oscamuser.log
logfile = /media/hdd/oscam/oscam.log
cwlogdir = /var/log/oscam/cw
loghistorysize = 9999
unlockparental = 1
nice = -1
maxlogsize = 50
saveinithistory = 1
lb_mode = 1
lb_save = 100
lb_savepath = /media/hdd/oscam/stat
[monitor]
hideclient_to = 15
appendchaninfo = 0
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = localuser
request_mode = 1
[webif]
httpport = 5000
httphelplang = en
httpuser = user
httppwd = password
httpcss = /var/tuxbox/config/proflinux_ddcstyle.css
httprefresh = 20
httpallowed = 127.0.0.1,192.168.1.1-192.168.1.254
Men mag volgende lijven vervangen
usrfile = /media/hdd/oscam/oscamuser.log
logfile = /media/hdd/oscam/oscam.log
door
usrfile = stdout
logfile = stdout
the ccsfile must be in the config directory.
oscam.server
device = /dev/sci1
device = /dev/sci1
the caid can be changed, but don't forget to change auprovider and the services.
oscam.user
[account]
user = localuser
au = 1
that is the user for the dvapi, the au = 1 is for the update
oscam.services
[tvv]
provid = 00006C,000000
srvid =
[ned]
provid = 00006A,000000
srvid =
[telesat]
provid = 00006D,,000000
srvid =
you can add srvid , but it's not nessesary when you've full account.
oscam.dvbapi
P: 0100:00006C # TVVlaanderen
P: 0100:00006A # Ned
P: 0100:00006D # Télésat
Sequence doesn't matter. If you ignore some caid or svrid, put them on top.
This file is added by daniel2005 : [[http://www.pli-images.org/getfile.php?type=a&file_id=11904 proflinux_ddcstyle.css]]


Revision [4251]

Edited on 2011-09-02 13:44:42 by Jeroensky [reminder: streamboard.gmc.to links are back online after 3-9-11]
Additions:
For using OScam with [[http://www.tv-vlaanderen.be/ TV Vlaanderen]] , [[http://www.tntsat.tv/ TNTsat]] . [[http://www.telesat.com/ TeleSat]]
Only the oscam.server file is different. No CanalDigitaal related reader configured but a reader you choose below.(be sure you configure the device -sci0/sci1/sci2/sci3- properly!, 4 example If you have the card in the second cardreader, then change /dev/sci0 to /dev/sci1 )
Added the provider reader you need in oscam.server file:
label = cardreader-tvvlaanderen
services = tvv
caid = 0100
emmcache = 1,3,2
lb_weight = 1000
auprovid = 00006C
label = cardreader-telesat
services = telesat
caid = 0100
emmcache = 1,3,2
lb_weight = 1000
auprovid = 00006D
Deletions:
For using OScam with the French **TNTsat**. [[http://www.tntsat.tv/ TNTsat]]
Only the oscam.server file is different. No CanalDigitaal related reader configured but a TNTsat reader.(unless you have such a smartcard, be shure you configure the device -sci0/sci1/sci2/sci3- properly!),
If you have the TNTsat card in the second cardreader, then change /dev/sci0 to /dev/sci1
Added this reader in oscam.server file for TNTsat:


Revision [4250]

Edited on 2011-09-02 13:34:38 by Jeroensky [reminder: streamboard.gmc.to links are back online after 3-9-11]
Deletions:
emmcache = 1,3,2


Revision [4249]

Edited on 2011-09-02 13:15:54 by Jeroensky [reminder: streamboard.gmc.to links are back online after 3-9-11]

No Differences

Revision [4248]

Edited on 2011-09-02 13:11:54 by Jeroensky [reminder: streamboard.gmc.to links are back online after 3-9-11]
Additions:
For using OScam with the French **TNTsat**. [[http://www.tntsat.tv/ TNTsat]]
Deletions:
For using OScam with the French **TNTsat**.


Revision [4247]

Edited on 2011-09-02 13:07:32 by Jeroensky [reminder: streamboard.gmc.to links are back online after 3-9-11]
Additions:
Here my [[http://www.canaldigitaal.nl/klantenservice/smartcard.aspx CanalDigitaal]] example of OScam on a **DM8000** with two card readers and **CanalDigitaal** smart card .
For using OScam with the French **TNTsat**.
You can use the files of CanalDigitaal config example.
Only the oscam.server file is different. No CanalDigitaal related reader configured but a TNTsat reader.(unless you have such a smartcard, be shure you configure the device -sci0/sci1/sci2/sci3- properly!),
If you have the TNTsat card in the second cardreader, then change /dev/sci0 to /dev/sci1
Added this reader in oscam.server file for TNTsat:
[reader]
label = cardreader-tntsat
protocol = internal
device = /dev/sci0
services = tntsat
caid = 0500
aeskeys = 0500@030B00:439726EBB6A939A456C05FF6AA606C43,A79AC0DBEC9C9251D1915F058862AF26,EF3CB8D36A862097A33FC47101041BE3
detect = cd
mhz = 500
cardmhz = 357
group = 1
emmcache = 1,3,2
lb_weight= 1000
auprovid = 030B00
Save the file and store it in when using oscam-experimental :
Reboot and you can enjoy TNTsat (this example is made by user Fretsat)
Deletions:
Here my example of OScam on a **DM8000** with two card readers and **CanalDigitaal** smart card .


Revision [4246]

Edited on 2011-09-02 12:34:12 by Jeroensky [(reminder: streamboard.gmc.to links are back online after 3-9-11]
Additions:
===Configuration examples of OScam users:===
Deletions:
===Configuration examples:===


Revision [4237]

Edited on 2011-08-29 15:21:44 by Jeroensky [(reminder: streamboard.gmc.to links are back online after 31-8-11]
Additions:
- [[http://www.streamboard.gmc.to Click here to go to official website]].
- [[http://www.streamboard.gmc.to/wiki/index.php/OSCam/en Click here to go to official OScam wiki]].
Deletions:
- [[http://streamboard.gmc.to Click here to go to official website]].


Revision [4223]

Edited on 2011-08-29 13:32:08 by Jeroensky [(reminder: streamboard.gmc.to links are back online after 31-8-11]
Additions:
====OScam howto: ====
Deletions:
====OScam howto====


Revision [4222]

Edited on 2011-08-29 13:31:46 by Jeroensky [(reminder: streamboard.gmc.to links are back online after 31-8-11]
Additions:
====OScam howto====
Deletions:
======OScam howto======


Revision [4216]

Edited on 2011-08-29 13:17:07 by Jeroensky [(reminder: streamboard.gmc.to links are back online after 31-8-11]
Deletions:
- [[http://oscam.to/wbb3/ Click here to go to OScam forum board]]


Revision [4206]

Edited on 2011-08-29 13:12:10 by Jeroensky [(reminder: streamboard.gmc.to links are back online after 31-8-11]
Additions:
[[HomePage Back to the PLi® Wiki]] : [[softcamwiki SoftCam Wiki]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]] : [[vuplus VU+]]
Deletions:
[[HomePage Back to the PLi® Wiki]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]] : [[vuplus VU+]]


Revision [4205]

Edited on 2011-08-29 13:08:39 by Jeroensky [Grammar correction + added more (official?) OScam links. (please do add more "Otherexamples")]
Additions:
====OScam, Open Source softcam====
(It's amazing!)
Deletions:
====OScam, Open Source softcam====
==={{color c="gray" text="optional page subtitle"}}===


Revision [4204]

Edited on 2011-08-29 13:07:19 by Jeroensky [Grammar correction + added more (official?) OScam links. (please do add more "Otherexamples")]
Additions:
====OScam, Open Source softcam====
**nocrypt = 127.0.0.1,192.168.1.0-192.168.1.255**
//This is the used port, to login go with browser after configuration to http://boxipaddress:16002 //
http://ip_box:16002 (port 16002 refers to the configured port in oscam.conf under httpport = )
Deletions:
====PAGE TITLE====
**nocrypt = 127.0.0.1,192.168.1.0-192.168.1.255**
//This is the used port, to login go with browser goto http://boxipaddress:16002 //
http://ip_box:16002 (port 16002 refers to the configured port in oscam.conf under http port = )


Revision [4203]

Edited on 2011-08-29 12:57:21 by Jeroensky [Grammar correction + added more (official?) OScam links. (please do add more "Otherexamples" below t]
Additions:
Their is a official website of OScam:
- [[http://streamboard.gmc.to Click here to go to official website]].
I also found kind of "new" official OScam website:
- [[http://oscam.to/wbb3/ Click here to go to OScam forum board]]
- [[http://www.oscam.to/wbb3/index.php?page=MibbitChat Click here to go to OScam Chat]]
- [[http://www.oscam.to/wbb3/ Click here to go to OScam forum board]]
- [[http://download.oscam.to/ Click here to go to OScam Download Center]] (**mips-tuxbox-oeXX** is for our enigma2 tuner)
Deletions:
Their is a official website of OScam. [[http://streamboard.gmc.to Click here to go to official website]].


Revision [4202]

Edited on 2011-08-29 12:45:05 by Jeroensky [grammar correction (request of more config examples)]
Additions:
Here my example of OScam on a **DM8000** with two card readers and **CanalDigitaal** smart card .
Then download these 3 files (right click save link as): [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]]. Remove the numbers in front of downloaded file names, so that filenames are exactly the same as written here.
//Be sure it's the ip range of your home network(or network where your enigma2 tuner is in).//
//Be sure you give your user name and password that you want to use for web browser access to configure and check OScam.//
//Be sure it's the ip range of your home network(or network where your enigma2 tuner is in).//
This example is ready for Dutch smart card of Canal Digitaal. To find out what you need to fill in for your sat tv operator smart card info [[http://streamboard.gmc.to:8001/wiki/CardsList check here]].
This example is ready for the two smart card readers of the DM8000. If your device has only one smart card reader, then remove the reader config of device /dev/sci1
I also added some examples of card servers. You see in this file 2 examples of free card server for CCcam and MGcamd clients. OScam can use card servers of non OScam too (yeah awesome!). [[http://streamboard.gmc.to/wiki/index.php/OSCam/en/examples/Reader Here a link to know how to added more readers]] (or cardservers) to oscam.server.
Now if you edited oscam.conf + oscam.dvbapi + oscam.server correctly, it's time to upload them by ftp to your enigma2 tuner in the directory:
Now for sure, reboot the Enigma2 tuner, and you got your OScam working. have fun with it, and please post examples like this here, for other tuners or satellite operators.
http://ip_box:16002 (port 16002 refers to the configured port in oscam.conf under http port = )
Deletions:
Here my example of OScam on a **DM8000** with two cardreaders and **CanalDigitaal** smartcard .
Then download these 3 files (rightclick save link as): [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]]. Remove the numbers in front of downloaded file names, so that filenames are exactly the same as written here.
//Be shure it's the ip range of your homenetwork(or network where your enigma2 tuner is in).//
//Be shure you give your username and password that you want to use for webbrowser acces to configure and check OScam.//
//Be sure it's the ip range of your homenetwork(or network where your enigma2 tuner is in).//
This example is ready for Dutch smartcard of Canal Digitaal. To find out what you need to fill in for your sat tv operator Smartcard info [[http://streamboard.gmc.to:8001/wiki/CardsList check here]].
This example is ready for the two smartcardreaders of the DM8000. If your device has only one smartcardreader, then remove the reader config of device /dev/sci1
I also added some examples of cardservers. You see in this file 2 examples of freecard server for CCcam and MGcamd clients. OScam can use cardservers of non OScam too. [[http://streamboard.gmc.to/wiki/index.php/OSCam/en/examples/Reader Here a link to know how to added more readers]] (or cardservers) to oscam.server.
Now if you edited oscam.conf + oscam.dvbapi + oscam.server correctly, it's timeto upload them by ftp to your enigma2 tuner in the directory:
Now for sure, reboot the Enigma2 tuner, and you got your OScam working. have fun with it, and please post examples like this here, for other tuners or satelite operators.
http://ip_box:16002 (port 16002 refers to the configured port in oscam.conf under httpport = )


Revision [4201]

Edited on 2011-08-29 12:38:57 by Jeroensky [grammar correction (request of more config examples)]
Additions:
//This is the used port, to login go with browser goto http://boxipaddress:16002 //
Deletions:
//This is the used port, to login go with browser goto http://boxipaddress:16002//


Revision [4200]

Edited on 2011-08-29 12:38:10 by Jeroensky [grammar correction (request of more config examples)]
Additions:
Now it is possible to access the configuration of your OsCam server by web interface:
http://ip_box:16002 (port 16002 refers to the configured port in oscam.conf under httpport = )
Deletions:
Now it is possible to access the configuration of your OsCam server by web interface, http://ip_box:16002 (port 16002 refers to the configured port in oscam.conf under httpport = )


Revision [4199]

Edited on 2011-08-29 08:05:34 by Tech [grammar correction (request of more config examples)]
Additions:
//Be sure it's the ip range of your homenetwork(or network where your enigma2 tuner is in).//
Now it is possible to access the configuration of your OsCam server by web interface, http://ip_box:16002 (port 16002 refers to the configured port in oscam.conf under httpport = )


Revision [4198]

Edited on 2011-08-29 02:02:50 by Jeroensky [grammar correction (request of more config examples)]

No Differences

Revision [4191]

Edited on 2011-08-29 01:53:39 by Jeroensky [grammar correction (request of more config examples)]
Additions:
[[HomePage Back to the PLi® Wiki]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]] : [[vuplus VU+]]
Deletions:
[[HomePage Back to the PLi® Wiki]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]]


Revision [4190]

Edited on 2011-08-29 01:52:00 by Jeroensky [grammar correction (request of more config examples)]
Additions:
This example is ready for Dutch smartcard of Canal Digitaal. To find out what you need to fill in for your sat tv operator Smartcard info [[http://streamboard.gmc.to:8001/wiki/CardsList check here]].
Deletions:
This example is ready for Dutch smartcard of Canal Digitaal. To find out what you need to fill in for your sat tv operator Smartcard info[[http://streamboard.gmc.to:8001/wiki/CardsList check here]].


Revision [4189]

Edited on 2011-08-29 01:50:08 by Jeroensky [grammar correction (request of more config examples)]
Additions:
**--------------------------------------------------------------------------------------------------**
**--------------------------------------------------------------------------------------------------**
Other examples here
**--------------------------------------------------------------------------------------------------**
Other examples here
**--------------------------------------------------------------------------------------------------**


Revision [4188]

Edited on 2011-08-29 01:17:22 by Jeroensky [grammar correction (request of more config examples)]
Additions:
Then download these 3 files (rightclick save link as): [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]]. Remove the numbers in front of downloaded file names, so that filenames are exactly the same as written here.
Deletions:
Then download these 3 files (rightclick save as): [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]]. Remove the numbers in front of downloaded file names, so that filenames are exactly the same as written here.


Revision [4187]

Edited on 2011-08-29 01:16:56 by Jeroensky [grammar correction (request of more config examples)]
Additions:
Then download these 3 files (rightclick save as): [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]]. Remove the numbers in front of downloaded file names, so that filenames are exactly the same as written here.
Deletions:
Then download these 3 files: [[http://www.pli-images.org/files/wiki/013571_oscam.conf oscam.conf]] + [[http://www.pli-images.org/files/wiki/013571_oscam.dvbapi oscam.dvbapi]] + [[http://www.pli-images.org/files/wiki/013571_oscam.server oscam.server]].


Revision [4186]

Edited on 2011-08-29 01:15:05 by Jeroensky [grammar correction (request of more config examples)]

No Differences

Revision [4184]

Edited on 2011-08-29 01:12:34 by Jeroensky [grammar correction (request of more config examples)]
Additions:
===Configuration examples:===
Here my example of OScam on a **DM8000** with two cardreaders and **CanalDigitaal** smartcard .
Press **Menu** on remote control and navigate to: **Plugins > DownloadPlugins > softcams > oscam-experimental**
Install the oscam-experimental plugin.
Deletions:
Here my example of OScam on a DM8000 with CanalDigitaal smartcard in the lower cardreader.
Press **Menu** on remote control and navigate to: **Plugins > DownloadPlugins > softcams > oscam-experimental** Install the oscam-experimental plugin.


Revision [4183]

Edited on 2011-08-29 01:11:00 by Jeroensky [grammar correction (request of more config examples)]
Additions:
Press **Menu** on remote control and navigate to: **Plugins > DownloadPlugins > softcams > oscam-experimental** Install the oscam-experimental plugin.
Deletions:
Press **Menu** on remote control and navigate to: **Plugins > DownloadPlugins > softcams > oscam-experimental**


Revision [4182]

Edited on 2011-08-29 01:09:58 by Jeroensky [grammar correction (request of more config examples)]
Additions:
OScam is a highly configurable softcam. So a howto can be getting huge if everything is explained.
OScam has different configuration files. It's not possible to say, everybody needs to configure it the same way (like CCcam).
This because we have different hardware, different sat tv providers, and different homenetworks. So maybe we can give examples.
Deletions:
OAScam is a highly configurable softcam. So a howto can be getting huge if everything is explained.
OScam has different configuration files.


Revision [4181]

Edited on 2011-08-29 01:07:45 by Jeroensky [grammar correction (request of more config examples)]

No Differences

Revision [4180]

Edited on 2011-08-29 01:06:36 by Jeroensky [grammar correction (request of more config examples)]
Additions:
==Open **oscam.conf** with simple text editor (kate/vim/notepad plusplus) and edit the line:==
==Open **oscam.dvbapi** with simple text editor (kate/vim/notepad plusplus) and edit: ==
==Open **oscam.server** with simple text editor (kate/vim/notepad plusplus) and edit: ==
Deletions:
==Open **oscam.conf** with simple text editor (kate/vim/notepad++) and edit the line: ==
==Open **oscam.dvbapi** with simple text editor (kate/vim/notepad++) and edit: ==
==Open **oscam.server** with simple text editor (kate/vim/notepad++) and edit: ==


Revision [4179]

Edited on 2011-08-29 01:05:23 by Jeroensky [grammar correction (request of more config examples)]
Additions:
==Open **oscam.conf** with simple text editor (kate/vim/notepad++) and edit the line: ==
==Open **oscam.dvbapi** with simple text editor (kate/vim/notepad++) and edit: ==
==Open **oscam.server** with simple text editor (kate/vim/notepad++) and edit: ==
Deletions:
==Open **oscam.conf** with simple text editor (kate/vim/notepad++) and edit the line:==
==Open **oscam.dvbapi** with simple text editor (kate/vim/notepad++) and edit:==
==Open **oscam.server** with simple text editor (kate/vim/notepad++) and edit:==


Revision [4178]

The oldest known version of this page was created on 2011-08-29 01:04:13 by Jeroensky [grammar correction (request of more config examples)]
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki