E2Video


Revision [900]

This is an old revision of E2Video made by jonc on 2008-06-09 10:12:40.

 

Upon the initial bootup after your install of the latest image one is greeted with this Audio & Video Settings screen.

Audio & Video Settings


You can change any of the following settings;

1. Video Output: Select where to output the video, this example shows the DVI port
2. Mode: select between the different high definitions modes to output you video
3. Refresh mode: Look at your TV manual, but in most cases 50Hz (60hz for our NA users)
4. Display 4:3 content as: select the format that best suits your TV
5. AC3 default: If you want to watch other non-hidef channels as well select no
6. AC3 downmix: if you sais NO to the above option the select YES here

Once you set this up press the GREEN button to Save your changes, if you need to change anything else you can do it later under the Menu Button, xxxxxxxxx xxxxxxx xxxxxxx


Tip: You can at anytime go to this menu and change the details


DM800 : Generic Howtos : DM500 : DM500+ : DM56xx : DM600 : DM7000 : DM7020 : DM7025 : Back to the PLiĀ® Wiki Home Page
There are no comments on this page.
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki