E2Tuner


Revision history for E2Tuner


Revision [3948]

Last edited on 2010-08-02 11:54:09 by VU+NL [Added back to vuplus]
Additions:
[[E2Sat back 1 page]] : [[HomePage Back to the PLi® Wiki Home Page]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]] : [[http://www.pli-images.org/modules/wiki/index.php?wakka=vuplus vuplus]]
Deletions:
[[E2Sat back 1 page]] : [[HomePage Back to the PLi® Wiki Home Page]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]]


Revision [3491]

Edited on 2009-03-11 08:16:35 by jonc [added E2 Tuner - Diseqc 1.2 screen shot]

No Differences

Revision [3489]

Edited on 2009-03-11 07:07:07 by jonc [added E2 Tuner - Diseqc 1.2 screen shot]
Additions:
Another example this time a move dish with diseqc 1.2 enabled
{{image alt="sat" title="sat" url="/images/wiki/000847_e2tuner_move.jpg"}}


Revision [3352]

Edited on 2008-11-28 05:17:41 by jonc [Henk Sat settings link]
Additions:
**Tip:** If you an European user you can look at the [[henksatsettings The Henksat Settings files]] - Automatic Satellite/Transponder setup and settings to help you
Deletions:
**Tip:** If you an European user you can look at the[[henksatsettings The Henksat Settings files]] - Automatic Satellite/Transponder setup and settings to help you


Revision [3351]

Edited on 2008-11-28 05:17:09 by jonc [Henk Sat settings link]
Additions:
**Tip:** If you an European user you can look at the[[henksatsettings The Henksat Settings files]] - Automatic Satellite/Transponder setup and settings to help you
[[E2Sat back 1 page]] : [[HomePage Back to the PLi® Wiki Home Page]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]]
Deletions:
[[E2Sat back 1 page]] : [[HomePage Back to the PLi® Wiki Home Page]] : [[DM7025 DM7025]] : [[DM800 DM800]]


Revision [3159]

Edited on 2008-11-17 03:42:15 by jonc [added a howto do it]
Additions:
There are 4 major settings here with up to 10 minor settings. This how to uses the **Advanced mode**, but you can
change this to make your life easier - simply press the right and left buttons over the //Configuration Mode// row.
Deletions:
There are 4 major settings here with up to 10 minor settings. This how to used the **Advanced mode**, but you can
change this to make your life easier - simply press the right and left buttons over the //Configuration Mod//e row.


Revision [3158]

Edited on 2008-11-17 03:41:20 by jonc [added a howto do it]
Additions:
There are 4 major settings here with up to 10 minor settings. This how to used the **Advanced mode**, but you can
change this to make your life easier - simply press the right and left buttons over the //Configuration Mod//e row.
Deletions:
There are 4 major settings here with up to 10 minor settings.


Revision [3157]

Edited on 2008-11-17 03:38:46 by jonc [added a howto do it]
Additions:
===={{color c="gray" text="Seup your DVB S-C-T or S2 tuner(s)"}}====
**TIP:** to add more satellites, simply repeat the process above until you have added all the satellites you need/require.
**TIP:** once you have added all your satellites [[E2ManualScan you will want to scan them, so click here to learn more ..]]
Deletions:
===={{color c="gray" text="Seup your DVB -S-C-T or S2 tuner(s)"}}====


Revision [3156]

Edited on 2008-11-17 03:31:00 by jonc [added a howto do it]
Additions:
Select the tuner you have installed or want to use with this setup (you can have more than 1 tuner set up so make sure
you select the right one) with your arrows keys and the OK button on your remote control.
Once you have defined your tuner type (DVB-S2 example below) this setup up screen for your satellite(s)
There are 4 major settings here with up to 10 minor settings.
//Satellite// row and press either your right or left arrows to change the satellite name. Please beware that
the satellite of your choice no matter where your are in the world.
satellites.xml file you are UNABLE to select both the C & Ku band setup of the same satellite (unless
- 13v = Vertical pol only
then you will leave this setting as it shows. For other setup's you can change this;
- Off = switch mode off (//also used with multi-switches / multiple diseqc's//)
- On = switch mode on (//also used with multi-switches / multiple diseqc's//)
**4.** **LNB:** This is the LNB to be used with the satellite you selected above, and will have all the associated
properties with that LNB below. Once you have set this up you can change the properties or simply change to another
satellites.xml file you are UNABLE to select both the C & Ku band setup of the same satellite (unless
**4b.** **LNB: Toneburst: ** this allows you to use a tone burst switch but in most cases will be left as shown above in the "None" mode
- **User Defined** = CHANGES in every country (normally a Ku Single or localized Ku Universal LNB)
Look at the different setting per page/screen below.
Deletions:
Select the tuner you have installed or want to use with this setup (you can have more than 1 tuner set up so make sure you select the right one) with your arrows keys and the OK button on your remote control.
Once you have defined your tuner type (DVB-S example below) this setup up screen for your satellite(s)
There are 4 major settings here with 10 minor settings.
{{image alt="sat" title="sat" url="/images/wiki/000847_800_setup_tunerconfiguration2.jpg"}}
//Satellite// row and press either your right ot left arrows to change the satellite name. Please beware that
the satellite of your choice no matter where in the world you are.
satellites.xml file you are UNABLBE to select both the C & Ku band setup of the same satellite (unless
- 13v = Verical pol only
- Off = switch mode off
- On = switch mode on
**4.** **LNB:** This is the LNB to be used with the satellite selected above, and will have the associated
properties below. Once you have set this up you can change the properties or simply change to another
satellites.xml file you are UNABLBE to select both the C & Ku band setup of the same satellite (unless
**4b.** **LNB: Toneburst: ** this alows you to use a tone burst switch but in most cases will be left as shown above in the "None" mode
- **User Defined** = CHANGES in every country (normally a Ku Single or localized Ku Universial LNB)
Look at the different setting perpage.


Revision [3155]

Edited on 2008-11-17 03:19:47 by jonc [added a howto do it]
Additions:
- **USA ** LOF/L = 09750 - **LOF/H = 11250** - Threshold = 11700
- **Australia** LOF/L = 10700 - LOF/H = 10700 - Threshold = 12000
- **Asia** LOF/L = 11300 - LOF/H = 11300 - Threshold = 12000
**4g.** **LNB: Increased Voltage:** in most cases left as the default - no.
Below is a quick example or how to set up six (6) fixed dishes on a powered multiswitch;
Look at the different setting perpage.
Deletions:
- **USA **
** - Australia**
** - Asia**


Revision [3154]

Edited on 2008-11-17 03:10:04 by jonc [added a howto do it]
Additions:
**4a.** **LNB: Diseqc mode** This setting will set up your LNB to act in different ways and provide you
with a series of different screens. Here we will use the //Diseqc setting of 1.1//.
- None = 1 fixed satellite dish directly connected to your DM box
- 1.0 = 1 or more fixed satellites dish(s) directly connected to your DM box
- 1.1 = 1 or more fixed satellites dish(s) directly connected to your DM box
- 1.2 = A move dish of some sort i.e. HH move, prime focus move dish
**4b.** **LNB: Toneburst: ** this alows you to use a tone burst switch but in most cases will be left as shown above in the "None" mode
**4c.** **LNB: Committed diseqc command:** This is the diseqc port you have your selected satellite dish
plugged into. The options are
- AA - 1st connector
- AB - 2nd connector
- BA - 3rd connector
- BB - 4th connector
- Input 1 ......
**4d.** **LNB: Fast diseqc:** In most cases this is just set to the default setting - //no//
**4e.** **LNB: Sequence repeat: ** In most cases this is just set to the default setting - //no//
**4f.** **LNB: Command Order:** In most cases this is just set to the default setting - //committed,toneburst//
**4g.** **LNB: LOF** Now this is an important one! This setting is asking for the details of your LNB.
the options are;
- **Universal LNB** = the same world over (09750 - 10600 - 11700)
- **C-Band** = the same world over (05150-05150-03200)
- **User Defined** = CHANGES in every country (normally a Ku Single or localized Ku Universial LNB)
Examples of User Defined LNB's
- **USA **
** - Australia**
** - Asia**
Deletions:
**4a.** **LNB: Diseqc mode** This setting will set up your LNB to act in different ways.
- under construction -


Revision [3153]

Edited on 2008-11-17 02:44:09 by jonc [added a howto do it]
Additions:
===={{color c="gray" text="Seup your DVB -S-C-T or S2 tuner(s)"}}====
Click here for the [[E1Sat E1 Generic Menus]]
Once you have defined your tuner type (DVB-S example below) this setup up screen for your satellite(s)
will be shown. We will below go through the set up and give examples of the changes you may need to
make for the LNB settings in your part of the world.
There are 4 major settings here with 10 minor settings.
**1.** The first thing you need to do is define the **satellite** you are going to use. You can simply highlight the
**2.** **Voltage mode:** If you have a fixed dish or move dish just plugged straight into your DM box
then you will leave this setting as it shows. For other setup you can change this;
- Polarization = Both vertical and horizontal poles are used
- 13v = Verical pol only
- 18v = Horizontal pol only
**3.** **Tone mode:** If you have a fixed dish or move dish just plugged straight into your DM box
then you will leave this setting as it shows. For other setup you can change this;
- Off = switch mode off
- On = switch mode on
//Note:// similar to the 22hz setting on an E1 box
**4.** **LNB:** This is the LNB to be used with the satellite selected above, and will have the associated
properties below. Once you have set this up you can change the properties or simply change to another
LNB number with different properties.

**4a.** **LNB: Diseqc mode** This setting will set up your LNB to act in different ways.
- under construction -
===={{color c="gray" text="Seup your satellites"}}====
{{image alt="sat" title="sat" url="/images/wiki/000847_pas81.jpg"}}
{{image alt="sat" title="sat" url="/images/wiki/000847_pas21.jpg"}}
{{image alt="sat" title="sat" url="/images/wiki/000847_thaicom1.jpg"}}
{{image alt="sat" title="sat" url="/images/wiki/000847_telkom1.jpg"}}
{{image alt="sat" title="sat" url="/images/wiki/000847_measat1.jpg"}}
Deletions:
Once you have done this setup up your satellite as per the screen below.
**1.** The first thing you need to do is define the satellite you are going to use. You can simply highlight the


Revision [3152]

Edited on 2008-11-17 02:19:33 by jonc [added a howto do it]
Additions:
**1.** The first thing you need to do is define the satellite you are going to use. You can simply highlight the
//Satellite// row and press either your right ot left arrows to change the satellite name. Please beware that
since the release of the Pli Jade software, all satellites are included in this option so you can set up
the satellite of your choice no matter where in the world you are.
//A small word of warning for C/Ku band users of the same satellite:// With the current set up of the
satellites.xml file you are UNABLBE to select both the C & Ku band setup of the same satellite (unless
you do a manual edit of the satellites.xml file).
====Examples of a Multiswitch setup;====
Deletions:
Click here for the [[E1Sat E1 Generic Menus]]


Revision [3151]

Edited on 2008-11-17 02:01:03 by jonc [added a howto do it]
Additions:
{{image alt="sat" title="sat" url="/images/wiki/000847_pas71.jpg"}}


Revision [3122]

Edited on 2008-11-14 02:57:12 by jonc [google widget added]
Additions:
{{googletranslate}}


Revision [2828]

Edited on 2008-08-12 03:38:14 by jonc [google widget added]
Additions:
-----
==={{color c="gray" text="we want your input"}}===
we are looking for E2 contributors for E2 howto's please PM [[WanWizard WanWizard]] or [[jonc jonc]]
Deletions:
//This is an Enigma 2 or E2 menu//


Revision [2231]

Edited on 2008-06-22 04:30:38 by jonc [google widget added]
Additions:
{{image alt="sat" title="sat" url="/images/wiki/000847_800_setup_tunerconfiguration1.jpg"}}
{{image alt="sat" title="sat" url="/images/wiki/000847_800_setup_tunerconfiguration2.jpg"}}
Deletions:
{{image alt="sat" title="sat" url="http://www.jsat.tv/pli/e2/800_setup_tunerconfiguration1.jpg"}}
{{image alt="sat" title="sat" url="http://www.jsat.tv/pli/e2/800_setup_tunerconfiguration2.jpg"}}


Revision [1823]

Edited on 2008-06-15 03:05:06 by jonc [google widget added]
Additions:
Click here for the [[E1Sat E1 Generic Menus]]
Deletions:
Click here for the [[E1SatTrans E1 Generic Menus]]


Revision [1819]

Edited on 2008-06-15 03:03:05 by jonc [Renamed DM800Sat to:E2Sat]
Additions:
[[E2Sat back 1 page]] : [[HomePage Back to the PLi® Wiki Home Page]] : [[DM7025 DM7025]] : [[DM800 DM800]]
Deletions:
[[DM800Sat back 1 page]] : [[HomePage Back to the PLi® Wiki Home Page]] : [[DM7025 DM7025]] : [[DM800 DM800]]


Revision [1592]

Edited on 2008-06-15 01:30:41 by jonc [Renamed GenericSatTrans to:E1SatTrans]
Additions:
Click here for the [[E1SatTrans E1 Generic Menus]]
Deletions:
Click here for the [[GenericSatTrans E1 Generic Menus]]


Revision [1159]

Edited on 2008-06-12 05:12:37 by jonc [Renamed GenericSatTrans to:E1SatTrans]
Additions:
{{image alt="sat" title="sat" url="http://www.jsat.tv/pli/e2/800_setup_tunerconfiguration2.jpg"}}


Revision [1158]

Edited on 2008-06-12 05:12:19 by jonc [Renamed GenericSatTrans to:E1SatTrans]
Additions:
Select the tuner you have installed or want to use with this setup (you can have more than 1 tuner set up so make sure you select the right one) with your arrows keys and the OK button on your remote control.
Once you have done this setup up your satellite as per the screen below.


Revision [1157]

Edited on 2008-06-12 05:08:42 by jonc [Renamed GenericSatTrans to:E1SatTrans]
Additions:
{{image alt="sat" title="sat" url="http://www.jsat.tv/pli/e2/800_setup_tunerconfiguration1.jpg"}}
Deletions:
{{image alt="sat" title="sat" url="http://www.jsat.tv/pli/e2/800_setup_service-searching-tunerconfiguration1"}}


Revision [1156]

The oldest known version of this page was created on 2008-06-12 05:04:55 by jonc [Renamed GenericSatTrans to:E1SatTrans]
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki