Revision [3902]

This is an old revision of E2ShellCommands made by Jeroensky on 2010-07-19 21:20:05.


You're not logged in, thus the list of your pages could not be retrieved.'


Enigma2 tuner Telnet: common Unix/Linux Commands used via Telnet.

Version 1.09
Use a telnet client configure Enigma2 tuner ip address in settings.
Login with user root, hit enter button, and type the used password (default= dreambox , on a Dreambox tuner)

See all compatible commands.
Login with telnet client, when telnet client is logged in, press Tab Tab (so 2x TAB button)

Change Enigma2 tuner root password.

Minimal 5 and maximal 8 characters long, and can consist of UPPERCASE/lowercase letters and numbers.

Solving a jammed Enigma2 tuner.
killall enigma2

Reboot a Enigma2 tuner.

Change powerstate of a Enigma2 tuner.
Note: Change password in your used root password!
wget -O /dev/null -q http://root:password@localhost/web/powerstate?newstate=0

wget -O /dev/null -q http://root:password@localhost/web/powerstate?newstate=1

wget -O /dev/null -q http://root:password@localhost/web/powerstate?newstate=2

Restart Enigma2:
wget -O /dev/null -q http://root:password@localhost/web/powerstate?newstate=3
Wakeup from Standby:
wget -O /dev/null -q http://root:password@localhost/web/remotecontrol?command=116

Basic navigation.
cd (”change directory”), will take you back to your $HOME directory

To change to a specific directory, type cd followed by the path to the directory. If it is a subdirectory of the current directory, you can just type the directory name.
cd /path/to/directory

Typing cd .. moves you up one directory from your current location.
cd ..

To see which directory you are in, type pwd (”print (display) working directory”).

Just as it sounds, use exit to log out. Alternatively, you can type logout.

Creating and deleting directories.
To create a new directory, type mkdir (”make directory”) and specify the new directory’s name.
mkdir directoryname

To delete an empty directory, type rmdir (”remove directory”) and the directory’s name.
rmdir directoryname

Install & remove & list packages.
To get a package to /tmp directory on Enigma2 tuner and unzip it:
cd /tmp

wget exact-package-name.ipk.zip

upzip exact-package-name.ipk.zip

ipkg install exact-package-name.ipk

ipkg packagename

ipkg remove exact-package-name.ipk

List installed packages:
ipkg list_installed

List all packages:
ipkg list

To filter the list, added the filtered word after the command between two stars example: ipkg list *plugin*

Update Open-Pli Enigma2 tuner.
init 4

ipkg update && ipkg upgrade

init 3


Create Enigma log (see what Enigma does).
init 4


init 4

/bin/sh /usr/bin/enigma2.sh

Telnet will output Enigma2 activity. To stop press CTRL-C

Create Enigma screenshot.
grab /tmp/screenshot.bmp

After that go with ftp client or network browser to /tmp/ directory of Enigma2 tuner/pvr and download the screenshot.bmp file.

Listing files.
To display a list of files and subdirectories in your current directory, type ls (”list”)

To see a more complete list which includes hidden files or files that begin with a “.” (dot), type ls -a.
ls -a

To list all files and directories in long format which will provide details about each file and directory, type ls -la.
ls -la

To list all directories and files, sorted by size, in long format, type ls -lS.
ls -lS

To list all files and directories in long format by time modified, type ls -lta.
ls -lta

Copying files.
Copy the contents of one file to another file, resulting in two copies of the same file on your account.
cp oldfilename newfilename

Copy the contents of one directory to another directory. Make sure you have created the destination directory before trying to copy files to it - see mkdir above. Results in two copies of the files on your account; one copy in the existing directory and another in the destination directory.
cp directory/* destinationdirectory

Searching files and directories.
The find command can be used to locate files or a group of files. It can also be used to display directories. The example given will find all file and directory names within the current directory and subdirectories of it that begin with the letter n. (You can also explore using the locate command - type info locate and/or man locate for usage information.)
find -name ‘n*’

Can be used to locate text in a specific file or directory of files (use * in place of filename to search all of the files in the current directory). The -i argument indicates the search is to disregard cASe, the -n instructs to show the corresponding line number, and -w tells it to match only based on the whole word. (This doesn’t even begin to touch on the power of grep and its many uses. In addition to its searching capability, the grep command can be used in combination with other commands to act as a filter. It also allows the use of “wildcards”. Two other variations of grep are also available, egrep and fgrep. To begin your quest for more information, type man grep and/or info grep.)
grep -inw text filename

Displaying / comparing file content.
Counts and displays the number of lines, number of words, and number of characters of the given file.
wc filename

Displays the entire contents of a file.
cat filename

Shows the content of the file, including line numbers (nl=number lines).
nl filename

Displays the contents of a file one screen at a time. Press the SPACEBAR to display the next screen of text.
more filename

Compares the contents of the two named files and reports the first different character found and the line number.
cmp filename1 filename2

Compares the contents of the two named files and reports all of the differences found. (Can also be used for comparing the contents of two directories.)
diff filename1 filename2

Moving, renaming, and deleting files.
Use to rename a file (mv fileA fileB), move a file (mv fileA /dirA/), or both (mv fileA /dirB/fileB).
mv oldfilename newfilename

Removes (deletes) the specified file. (The -i is not necessary, but is recommended as it will prompt you to confirm the action first. When prompted, type y to confirm or type n if you changed your mind.)
rm -i filename

Changing permissions.
Changes the permissions on a filename or directory as specified. (First go with cd command to directory where the file is.)
chmod permissions filename

For example,
chmod 755 HackSat_Key_downloader_userscript.sh

Archives and compression.
To archive a directory and all of its contents including subdirectories, navigate to where the directory is located and type the above command, replacing filename.tar with the name you wish to give the archive file and directoryname with the name of the directory you wish to archive. Alternatively, you can archive a select group of individual files (or directories) by specifying each file name in place of directoryname separated by spaces, like tar -cvf filename.tar fileA fileB fileC. Note: When creating a tar file (aka “tarball”) be sure to specify the name you wish to give the tar file! (TAR indicates Tape ARchive, as it was originally a tape archiving program. The -c means “create”, v means “verbose” (which basically says tell me what you’re doing), and the f indicates that a filename will follow (filename.tar)).
tar -cfv filename.tar directoryname

Typing this command will result in a list of the contents of the tar file. This is generally a good thing to do before unpacking the tar file to be sure there are no matching filenames which will result in files being unintentionally overwritten.
tar -tvf filename.tar

You can see the similarities to the command used to tar the file. This time, though, you use -x to “extract” instead of the -c used to create. You can also extract only certain select files (or directories) by specifying the individual names, separated by spaces, after the tar filename, such as tar -xvf filename.tar fileA fileC
tar -xvf filename.tar

This utility, gzip (gnu zip), is used for compression. Normally, when you wish to compress a set of files, you willtar them first then compress them using this command. In doing so, the filename will automatically change from filename.tar to filename.tar.gz (appending .gz to the file extension).
gzip filename.tar

This command (g”unzip”) is used to uncompress a .tar.gz file, which will also result in the filename being changed back to filename.tar. Once it has been uncompressed, you can then untar it using the tar command above. (Alternatively, you can use gzip -d (for “decompress”) in place of gunzip.)
gunzip filename.tar.gz

This command, which uses a z switch (”zip”), allows you to take a bit of a shortcut instead of using the tar and gzip commands separately. The example will result in a compressed archive named filename.tgz.
tar -czvf filename.tgz directoryname

This command is used to uncompress and extract the files from a .tgz archive.
tar -xzvf filename.tgz

To reboot and stop the Enigma2 (Dreambox!) tuner to upload & install a image by computer browser.
Be shure you only do this if you want to reflash the Enigma2 tuner. Because your Enigma2 tuner will boot with DHCP active so that you can upload a new image by browser on a computer.
mount /boot -o remount,rw

rm /boot/*


To flash an image using telnet.
This method will only work with a .img image file.
  1. Rename the image file to backup.img
  2. FTP the image file to the /tmp folder on the Enigma2 tuner

Telnet to your box and paste the following command:
cd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && reboot

To backup an image using telnet.
cat /dev/mtd/3 » /tmp/backup.img

  1. FTP to the box and navigate to the /tmp
  2. Here you will find the backup.img file.

To copy an image from your PC to the Enigma2 tuner via telnet.
First of all, you need to have a mounted directory from your PC. Make sure you have the image.img file in your mounted directory on your PC. Telnet to the Enigma2 tuner and paste this command:
cp /hdd/movie/image.img /tmp/image.img

The img will be copied from your mounted directory to the /tmp folder on the Enigma2 tuner ready to be flashed.

Dreambox DM8000: Changing Oled display brightness.
Check brightness setting:
cat /proc/stb/lcd/oled_brightness

Configure brightness setting (between 0-255, as example 30)
echo 30 » /proc/stb/lcd/oled_brightness

These commands are collected by Jeroensky TeRrItOrY. All credits goes to the creators, and not to me ;-)
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki