Revision [899]

This is an old revision of E1Video made by jonc on 2008-06-09 10:02:10.


Upon the initial bootup after your install of the latest image one is greeted with this Audio & Video Settings screen.
DM800 users click here

Audio & Video Settings

If you happen to be using a NTSC TV, most likely the screen will be rolling to the point that it is unreadable. Pressing the Channel Down button twice (to reach the TV System field), and the Volume Up button three times, should set the screen to the NTSC standard.

Once you set this up press the GREEN button to Save your changes, if you need to change anything else you can do it later under the Menu Button, Setup, System Settings, & Audio and Video.

Tip: You can at anytime go to this menu and change the details Click here to learn howto do this

Back to the PLiĀ® Wiki Home Page : Generic Howtos : DM500 : DM500+ : DM56xx : DM600 : DM7000 : DM7020 : DM7025 : DM800
There are no comments on this page.
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki