Wiki source for E1Softcam

Show raw source

====How to set the default Softcam====
==={{color c="gray" text="Dreambox Settings"}}===
//E1 Enigma 1 or E1 menus. [[E2SoftCam Click here]] for the E2 Menus//

Simply use the arrow buttons on your remote to highlight the softcam you require and then press the **OK** button to select it.
//We do not talk about what Cam works with what network subscription card or card sharing on this wiki or website.//

By default there is NO cam loaded in the softcam settings as shown below. On the 5series of boxes CCcam version 2.0.x is always included in our images for you. On all other E1 models you will have to down load the cam you require (see below).

{{image alt="PLi" title="PLi" url="/images/wiki/000847_softcam.png"}}

Select the default softcam (works with most networks out there) and press the OK button

{{image alt="PLi" title="PLi" url="/images/wiki/000847_softcam1.png"}}

If you want to see if your network subscription card is working with this softcam, save the settings (Green button) and then select Softcam again and now press the Yellow button to read your network subscription card.

{{image alt="PLi" title="PLi" url="/images/wiki/000847_softcam3.png"}}

As you can see in this case CCcam is reading the free subscription card from this network. If this screen is blank or has an error message you should read the configuration files for the cam you set up and see what you need to do to make it work.

{{image alt="PLi" title="PLi" url="/images/wiki/000847_softcam4.png"}}

**Note** //E2 boxes Softcam does not follow what we show here//

[[E1Setup Back 1 Page]] : [[HomePage Back to the PLiĀ® Wiki]] : [[E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]]

====Download other softcams====

==Sticky Emu/Soft Cam for channel and provider selection==

Soft Cams can be installed through the **[[E1SoftwareDownloadsSoftCam this section]]**

{{image alt="Software Management" title="download a Soft Cam" url="/images/wiki/000847_software_dload.png"}}

Downloadable Soft Cams/Cardservers (version numbers are left out):

* Camd 3
* Camx
* Ccamd
* CCcam //[included in all DM500 PLi images]//
* Evocamd
* Mgcamd
* Newcamd
* Opencam
* Scam
* ""NewCs"" Cardserver

{{image alt="Pli" title="Pli" url="/images/wiki/000847_plugin_soft1.png"}} {{image alt="Pli" title="Pli" url="/images/wiki/000847_plugin_soft2.png"}}

Cams are managed by the Plimgr service, which acts as a bridge between Enigma and the various user-selected emu's. Through the [[E1Setup PLi setup page]] blue button (if you have not assigned it to something else) -> softcam setup", sticky emu's for specific channels and providers can be easily selected, apart from a default softcam for general usage.

**Note:** [legacy] when different softcams are used for separate providers, softcam X used for recording channel A will be stopped when you Zap to channel B (using softcam Y).


==To add a Soft Cam manually:==

<<FTP the appropriate files to your box and chmod the files<<

<<Create an empty file with the same name as the Soft Cam, for example "pcam". Optionally, you can enter the version number of the softcam as text and save it<<

<<Upload this file to /var/etc/plimgr/cams/<<

PLi Manager will now detect the new Soft Cam "pcam", if you entered a version number in your file it will be recognised as such

<<Choose the new Soft Cam in the Soft Cam Setup<<

Or via a Telnet session:

<<FTP the appropriate files to your box and chmod the files<<

<<Telnet to your box and type:<<

%%echo "1.9" > /var/etc/plimgr/cams/pcam%%

(in this example your softcam will be displayed as version 1.9)

====Softcam configurations files====
To find out more details on any Soft Cam listed on this page, remember [[http://www.google.com google]] is your friend. We do not write any of these so we can not support them.

==Here's a list of where to place what files for which emu on the DM500 ==

*** Newcamd**
o Keys directory: /var/tuxbox/scce -keylist, ppua, constancw, rsakeylist, tpscrypt (/var/scce for versions < 6.01)
o Program files: /var/bin - newcamd, cardserv, cardspider, betadserv
o Config files: /var/tuxbox/config/newcamd - newcamd.conf, cardserv.cfg, betad.cfg (/var/tuxbox/config for versions < 6.02)
o AU files: /var/tuxbox/scce/ - nagrarom3.bin, nagraram3.bin, nagraepr3.bin, sttestrom3.bin, stmaprom3.bin, nagrarom7.bin, nagraram7.bin, nagraepr7.bin, nagrarom10.bin, nagraram10.bin, nagraepr10.bin, nagrarom11.bin, nagraram11.bin, nagraepr11.bin, rsakeylist (/var/scce for versions < 6.01)

o Keys directory: /var/keys - 'SoftCam.Key', seca2,nagra,via, irdeto,conax
o Program files: /var/bin - scam
o Config files: /var/keys - softcam.cfg
o AU files: /var/keys/ - seca2 /nagra_rom

*** Cam X**
o Keys directory: /var/keys - 'SoftCam.Key'
o Program files: /var/bin - camx server
o Config files: /var/etc - camx.config
o AU files: var/keys/ - ""AutoRoll.key""

*** Evocamd**
o Keys directory: /var/keys - Autoupdate.Key & Keylist.txt
o Program files: /var/bin - evocamd
o Config files: /var/keys - camd_cfg
o AU files: /var/keys - Autoupdate.Key, /var/scce/ - nagraepr3.bin, nagraepr7.bin, nagraepr10.bin, nagraepr11.bin, nagraram3.bin, nagraram7.bin, nagraram10.bin, nagraram11.bin, nagrarom3ext.bin

* **Radegast**
o Keys directory: /var/keys - SoftCam.Key & ""AutoRoll.key""
o Program files: /var/bin - rdgd, camd.rdgd, netpilot
o Config files: /var/etc - radegast.cfg
o AU files: Need a patched driver for older conax cards

* **Camd 3**
o Keys directory: /var/keys - camd3.keys
o Program files: /var/bin - camd3, pcamd
o Config files: /var/keys - camd3.conf, camd3.config, camd3.servers, camd3.users, pw_start.services, camd3.conf only needed for older camd3
o AU files: /var/keys/ - seca_hash.bin, seca2_hash_0070.bin, seca2_mask_0070.bin, camd3.keys

*** MGcamd**
o Keys directory: /var/keys - SoftCam.Key, ""AutoRoll.key"", tps
o Program files: /var/bin - mgcamd
o Config files: /var/keys - mg_cfg
o AU files:

*** Xcamd**
o Keys directory: /var/keys - Keys.txt, ""AutoRoll.key""
o Program files: /var/bin - xcamd
o Config files: /var/etc - xcamd.conf
o AU files: /var/roms/ - eeprom10.bin, eeprom11.bin, eeprom3.bin, eeprom7.bin, ram_10.bin, ram_11.bin, ram_3.bin, ram_7.bin, rom10.rom, rom11.rom, rom3.rom, rom7.rom

* **CCcam**
o Keys directory: /var/keys - SoftCam.Key, ""AutoRoll.key"", constant.cw
o Program files: /var/bin - CCcam
o Config files: /var/etc - CCcam.cfg
o AU files: uknown

* **The latest Cam X:**
o Keys directory: /var/keys - SoftCam.Key
o Program files: /var/bin - camx(ng) + server(ng)
o Config files: /var/etc - camx.config
o AU files: var/keys/ - ""AutoRoll.key""

[[E1Setup Back 1 Page]] : [[HomePage Back to the PLiĀ® Wiki]] : [[E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]]
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki