Revision history for E1Softcam
Additions:
[[E1Setup Back 1 Page]] : [[HomePage Back to the PLi® Wiki]] : [[E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]]
[[E1Setup Back 1 Page]] : [[HomePage Back to the PLi® Wiki]] : [[E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]]
[[E1Setup Back 1 Page]] : [[HomePage Back to the PLi® Wiki]] : [[E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]]
Deletions:
[[E1Setup Back 1 Page]] : [[HomePage Back to the PLi® Wiki]] : [[E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]]
Additions:
{{image alt="Software Management" title="download a Soft Cam" url="/images/wiki/000847_software_dload.png"}}
* ""NewCs"" Cardserver
{{image alt="Pli" title="Pli" url="/images/wiki/000847_plugin_soft1.png"}} {{image alt="Pli" title="Pli" url="/images/wiki/000847_plugin_soft2.png"}}
* ""NewCs"" Cardserver
{{image alt="Pli" title="Pli" url="/images/wiki/000847_plugin_soft1.png"}} {{image alt="Pli" title="Pli" url="/images/wiki/000847_plugin_soft2.png"}}
Deletions:
* New Cs Cardserver
Additions:
{{googletranslate}}
Additions:
Soft Cams can be installed through the **[[E1SoftwareDownloadsSoftCam this section]]**
Cams are managed by the Plimgr service, which acts as a bridge between Enigma and the various user-selected emu's. Through the [[E1Setup PLi setup page]] blue button (if you have not assigned it to something else) -> softcam setup", sticky emu's for specific channels and providers can be easily selected, apart from a default softcam for general usage.
**Note:** [legacy] when different softcams are used for separate providers, softcam X used for recording channel A will be stopped when you Zap to channel B (using softcam Y).
Cams are managed by the Plimgr service, which acts as a bridge between Enigma and the various user-selected emu's. Through the [[E1Setup PLi setup page]] blue button (if you have not assigned it to something else) -> softcam setup", sticky emu's for specific channels and providers can be easily selected, apart from a default softcam for general usage.
**Note:** [legacy] when different softcams are used for separate providers, softcam X used for recording channel A will be stopped when you Zap to channel B (using softcam Y).
Deletions:
Menu Button -> Setup -> Software Management -> Downloads -> Screen below
Cams are managed by the Plimgr service, which acts as a bridge between Enigma and the various user-selected emu's. Through the "PLi setup page (blue button) -> softcam setup", sticky emu's for specific channels and providers can be easily selected, apart from a default softcam for general usage.
Note: when different softcams are used for separate providers, softcam X used for recording channel A will be stopped when you Zap to channel B (using softcam Y).
Additions:
o AU files: var/keys/ - ""AutoRoll.key""
o Keys directory: /var/keys - SoftCam.Key & ""AutoRoll.key""
o Keys directory: /var/keys - SoftCam.Key, ""AutoRoll.key"", tps
o Keys directory: /var/keys - Keys.txt, ""AutoRoll.key""
o Keys directory: /var/keys - SoftCam.Key, ""AutoRoll.key"", constant.cw
o AU files: var/keys/ - ""AutoRoll.key""
o Keys directory: /var/keys - SoftCam.Key & ""AutoRoll.key""
o Keys directory: /var/keys - SoftCam.Key, ""AutoRoll.key"", tps
o Keys directory: /var/keys - Keys.txt, ""AutoRoll.key""
o Keys directory: /var/keys - SoftCam.Key, ""AutoRoll.key"", constant.cw
o AU files: var/keys/ - ""AutoRoll.key""
Deletions:
o Keys directory: /var/keys - SoftCam.Key & AutoRoll.Key
o Keys directory: /var/keys - SoftCam.Key, AutoRoll.Key, tps
o Keys directory: /var/keys - Keys.txt, AutoRoll.key
o Keys directory: /var/keys - SoftCam.Key, AutoRoll.key, constant.cw
o AU files: var/keys/ - AutoRoll.key
Deletions:
Additions:
{{image alt="Software Management" title="download a Soft Cam" url="/images/wiki/000847_dl_menu.png"}}
Deletions:
Additions:
{{image alt="PLi" title="PLi" url="/images/wiki/000847_softcam.png"}}
{{image alt="PLi" title="PLi" url="/images/wiki/000847_softcam1.png"}}
{{image alt="PLi" title="PLi" url="/images/wiki/000847_softcam3.png"}}
{{image alt="PLi" title="PLi" url="/images/wiki/000847_softcam4.png"}}
{{image alt="PLi" title="PLi" url="/images/wiki/000847_softcam1.png"}}
{{image alt="PLi" title="PLi" url="/images/wiki/000847_softcam3.png"}}
{{image alt="PLi" title="PLi" url="/images/wiki/000847_softcam4.png"}}
Deletions:
{{image alt="PLi" title="PLi" url="http://www.jsat.tv/pli/softcam1.png"}}
{{image alt="PLi" title="PLi" url="http://www.jsat.tv/pli/softcam3.png"}}
{{image alt="PLi" title="PLi" url="http://www.jsat.tv/pli/softcam4.png"}}
Additions:
To find out more details on any Soft Cam listed on this page, remember [[http://www.google.com google]] is your friend. We do not write any of these so we can not support them.
Additions:
//E1 Enigma 1 or E1 menus. [[E2SoftCam Click here]] for the E2 Menus//
Deletions:
Additions:
//E1 Enigma 1 or E1 menus. [[E2SoftCam Click here]] for the E2 E1 Menus//
Deletions:
Additions:
//E1 Enigma 1 or E1 menus. [[E2Setup Click here]] for the E2 E1 Menus//
Deletions:
Additions:
//E1 Enigma 1 or E1 menus. [[E2Main Click here]] for the E2 E1 Menus//
Deletions:
Additions:
==Sticky Emu/Soft Cam for channel and provider selection==
//- to be changed for JADE -//
Soft Cams can be installed through the PPanel (note that some Soft Cams require separate config files).
Menu Button -> Setup -> Software Management -> Downloads -> Screen below
{{image alt="Software Management" title="download a Soft Cam" url="http://jsat.tv/pli/dl_menu.png"}}
Downloadable Soft Cams/Cardservers (version numbers are left out):
==To add a Soft Cam manually:==
<<Create an empty file with the same name as the Soft Cam, for example "pcam". Optionally, you can enter the version number of the softcam as text and save it<<
PLi Manager will now detect the new Soft Cam "pcam", if you entered a version number in your file it will be recognised as such
<<Choose the new Soft Cam in the Soft Cam Setup<<
o Keys directory: /var/keys - 'SoftCam.Key', seca2,nagra,via, irdeto,conax
o Keys directory: /var/keys - 'SoftCam.Key'
o AU files: var/keys/ - 'AutoRoll.key'
//- to be changed for JADE -//
Soft Cams can be installed through the PPanel (note that some Soft Cams require separate config files).
Menu Button -> Setup -> Software Management -> Downloads -> Screen below
{{image alt="Software Management" title="download a Soft Cam" url="http://jsat.tv/pli/dl_menu.png"}}
Downloadable Soft Cams/Cardservers (version numbers are left out):
==To add a Soft Cam manually:==
<<Create an empty file with the same name as the Soft Cam, for example "pcam". Optionally, you can enter the version number of the softcam as text and save it<<
PLi Manager will now detect the new Soft Cam "pcam", if you entered a version number in your file it will be recognised as such
<<Choose the new Soft Cam in the Soft Cam Setup<<
o Keys directory: /var/keys - 'SoftCam.Key', seca2,nagra,via, irdeto,conax
o Keys directory: /var/keys - 'SoftCam.Key'
o AU files: var/keys/ - 'AutoRoll.key'
Deletions:
//- to be changed for JADE -//
SoftCams can be installed through the PPanel (note that some SoftCams require separate config files).
Blue Button -> Software Management -> Downloads -> Screen below
{{image alt="BlueButton Software Management" title="download a SoftCam" url="http://jsat.tv/pli/dl_menu.png"}}
Downloadable SoftCams/Cardservers (version numbers are left out):
==To add a SoftCam manually:==
<<Create an empty file with the same name as the SoftCam, for example "pcam". Optionally, you can enter the version number of the softcam as text and save it<<
PLi Manager will now detect the new SoftCam "pcam", if you entered a version number in your file it will be recognised as such
<<Choose the new SoftCam in the SoftCam Setup<<
o Keys directory: /var/keys - SoftCam.Key, seca2,nagra,via, irdeto,conax
o Keys directory: /var/keys - SoftCam.Key
o AU files: var/keys/ - AutoRoll.key
Additions:
**Note** //E2 boxes Softcam does not follow what we show here//
Deletions:
Additions:
//- to be changed for JADE -//
Deletions:
Additions:
**Note:**//E2 boxes Softcam does not follow what we show here.//
Additions:
[[E1Setup Back 1 Page]] : [[HomePage Back to the PLi® Wiki]] : [[E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]]
Deletions:
Additions:
//E1 Enigma 1 or E1 menus. [[DM800Setup Click here]] for the E2 E1 Menus//
[[GenericSetup Back 1 Page]] : [[HomePage Back to the PLi® Wiki]] : [[E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]]
[[GenericSetup Back 1 Page]] : [[HomePage Back to the PLi® Wiki]] : [[E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]]
Deletions:
[[GenericSetup Back 1 Page]] : [[HomePage Back to the PLi® Wiki]] : [[Generic Generic Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]]
Additions:
==={{color c="gray" text="Dreambox Settings"}}===
[[GenericSetup Back 1 Page]] : [[HomePage Back to the PLi® Wiki]] : [[Generic Generic Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]]
[[GenericSetup Back 1 Page]] : [[HomePage Back to the PLi® Wiki]] : [[Generic Generic Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]]
Deletions:
Additions:
By default there is NO cam loaded in the softcam settings as shown below. On the 5series of boxes CCcam version 2.0.x is always included in our images for you. On all other E1 models you will have to down load the cam you require (see below).
Select the default softcam (works with most networks out there) and press the OK button
{{image alt="PLi" title="PLi" url="http://www.jsat.tv/pli/softcam1.png"}}
If you want to see if your network subscription card is working with this softcam, save the settings (Green button) and then select Softcam again and now press the Yellow button to read your network subscription card.
{{image alt="PLi" title="PLi" url="http://www.jsat.tv/pli/softcam3.png"}}
As you can see in this case CCcam is reading the free subscription card from this network. If this screen is blank or has an error message you should read the configuration files for the cam you set up and see what you need to do to make it work.
{{image alt="PLi" title="PLi" url="http://www.jsat.tv/pli/softcam4.png"}}
Select the default softcam (works with most networks out there) and press the OK button
{{image alt="PLi" title="PLi" url="http://www.jsat.tv/pli/softcam1.png"}}
If you want to see if your network subscription card is working with this softcam, save the settings (Green button) and then select Softcam again and now press the Yellow button to read your network subscription card.
{{image alt="PLi" title="PLi" url="http://www.jsat.tv/pli/softcam3.png"}}
As you can see in this case CCcam is reading the free subscription card from this network. If this screen is blank or has an error message you should read the configuration files for the cam you set up and see what you need to do to make it work.
{{image alt="PLi" title="PLi" url="http://www.jsat.tv/pli/softcam4.png"}}
Additions:
Simply use the arrow buttons on your remote to highlight the softcam you require and then press the **OK** button to select it.
Deletions:
Additions:
Simply use the arrow buttons on your remote to highlight the sftcam you require and then press the **OK** button to select it.
//We do not talk about what Cam works with what network subscription card or card sharing on this wiki or website.//
* Camd 3
* New Cs Cardserver
*** Cam X**
* **Camd 3**
* **The latest Cam X:**
//We do not talk about what Cam works with what network subscription card or card sharing on this wiki or website.//
* Camd 3
* New Cs Cardserver
*** Cam X**
* **Camd 3**
* **The latest Cam X:**
Deletions:
* Camd3
* NewCs Cardserver
*** CamX**
* **Camd3**
* **The latest CamX:**
Additions:
//Generic Enigma 1 or E1 menus. [[DM800Setup Click here]] for the E2 Generic Menus//
Simply use the arrow buttons on your remote to highlight the sftcam you require and then press the **OK** button to select it. We do not talk about what Cam works with what network subscription card or card sharing on this wiki or website.
Simply use the arrow buttons on your remote to highlight the sftcam you require and then press the **OK** button to select it. We do not talk about what Cam works with what network subscription card or card sharing on this wiki or website.
Deletions:
Simply use the arrow buttons on your remote to highlight the sftcam you require and then press the **OK** button to select it.
Deletions:
etc
Additions:
====Download other softcams====
==Sticky Emu/SoftCam for channel and provider selection==
- to be changed for JADE -
SoftCams can be installed through the PPanel (note that some SoftCams require separate config files).
Blue Button -> Software Management -> Downloads -> Screen below
{{image alt="BlueButton Software Management" title="download a SoftCam" url="http://jsat.tv/pli/dl_menu.png"}}
Downloadable SoftCams/Cardservers (version numbers are left out):
* Camd3
* Camx
* Ccamd
* CCcam //[included in all DM500 PLi images]//
* Evocamd
* Mgcamd
* Newcamd
* Opencam
* Scam
* NewCs Cardserver
Cams are managed by the Plimgr service, which acts as a bridge between Enigma and the various user-selected emu's. Through the "PLi setup page (blue button) -> softcam setup", sticky emu's for specific channels and providers can be easily selected, apart from a default softcam for general usage.
Note: when different softcams are used for separate providers, softcam X used for recording channel A will be stopped when you Zap to channel B (using softcam Y).
==To add a SoftCam manually:==
<<FTP the appropriate files to your box and chmod the files<<
<<Create an empty file with the same name as the SoftCam, for example "pcam". Optionally, you can enter the version number of the softcam as text and save it<<
<<Upload this file to /var/etc/plimgr/cams/<<
PLi Manager will now detect the new SoftCam "pcam", if you entered a version number in your file it will be recognised as such
<<Choose the new SoftCam in the SoftCam Setup<<
Or via a Telnet session:
<<FTP the appropriate files to your box and chmod the files<<
<<Telnet to your box and type:<<
%%echo "1.9" > /var/etc/plimgr/cams/pcam%%
(in this example your softcam will be displayed as version 1.9)
==Sticky Emu/SoftCam for channel and provider selection==
- to be changed for JADE -
SoftCams can be installed through the PPanel (note that some SoftCams require separate config files).
Blue Button -> Software Management -> Downloads -> Screen below
{{image alt="BlueButton Software Management" title="download a SoftCam" url="http://jsat.tv/pli/dl_menu.png"}}
Downloadable SoftCams/Cardservers (version numbers are left out):
* Camd3
* Camx
* Ccamd
* CCcam //[included in all DM500 PLi images]//
* Evocamd
* Mgcamd
* Newcamd
* Opencam
* Scam
* NewCs Cardserver
Cams are managed by the Plimgr service, which acts as a bridge between Enigma and the various user-selected emu's. Through the "PLi setup page (blue button) -> softcam setup", sticky emu's for specific channels and providers can be easily selected, apart from a default softcam for general usage.
Note: when different softcams are used for separate providers, softcam X used for recording channel A will be stopped when you Zap to channel B (using softcam Y).
==To add a SoftCam manually:==
<<FTP the appropriate files to your box and chmod the files<<
<<Create an empty file with the same name as the SoftCam, for example "pcam". Optionally, you can enter the version number of the softcam as text and save it<<
<<Upload this file to /var/etc/plimgr/cams/<<
PLi Manager will now detect the new SoftCam "pcam", if you entered a version number in your file it will be recognised as such
<<Choose the new SoftCam in the SoftCam Setup<<
Or via a Telnet session:
<<FTP the appropriate files to your box and chmod the files<<
<<Telnet to your box and type:<<
%%echo "1.9" > /var/etc/plimgr/cams/pcam%%
(in this example your softcam will be displayed as version 1.9)
Deletions:
Additions:
====Softcam configurations files====
==Here's a list of where to place what files for which emu on the DM500 ==
*** Newcamd**
o Keys directory: /var/tuxbox/scce -keylist, ppua, constancw, rsakeylist, tpscrypt (/var/scce for versions < 6.01)
o Program files: /var/bin - newcamd, cardserv, cardspider, betadserv
o Config files: /var/tuxbox/config/newcamd - newcamd.conf, cardserv.cfg, betad.cfg (/var/tuxbox/config for versions < 6.02)
o AU files: /var/tuxbox/scce/ - nagrarom3.bin, nagraram3.bin, nagraepr3.bin, sttestrom3.bin, stmaprom3.bin, nagrarom7.bin, nagraram7.bin, nagraepr7.bin, nagrarom10.bin, nagraram10.bin, nagraepr10.bin, nagrarom11.bin, nagraram11.bin, nagraepr11.bin, rsakeylist (/var/scce for versions < 6.01)
* **UCAS/SCAM**
o Keys directory: /var/keys - SoftCam.Key, seca2,nagra,via, irdeto,conax
o Program files: /var/bin - scam
o Config files: /var/keys - softcam.cfg
o AU files: /var/keys/ - seca2 /nagra_rom
*** CamX**
o Keys directory: /var/keys - SoftCam.Key
o Program files: /var/bin - camx server
o Config files: /var/etc - camx.config
o AU files: var/keys/ - AutoRoll.key
*** Evocamd**
o Keys directory: /var/keys - Autoupdate.Key & Keylist.txt
o Program files: /var/bin - evocamd
o Config files: /var/keys - camd_cfg
o AU files: /var/keys - Autoupdate.Key, /var/scce/ - nagraepr3.bin, nagraepr7.bin, nagraepr10.bin, nagraepr11.bin, nagraram3.bin, nagraram7.bin, nagraram10.bin, nagraram11.bin, nagrarom3ext.bin
* **Radegast**
o Keys directory: /var/keys - SoftCam.Key & AutoRoll.Key
o Program files: /var/bin - rdgd, camd.rdgd, netpilot
o Config files: /var/etc - radegast.cfg
o AU files: Need a patched driver for older conax cards
* **Camd3**
o Keys directory: /var/keys - camd3.keys
o Program files: /var/bin - camd3, pcamd
o Config files: /var/keys - camd3.conf, camd3.config, camd3.servers, camd3.users, pw_start.services, camd3.conf only needed for older camd3
o AU files: /var/keys/ - seca_hash.bin, seca2_hash_0070.bin, seca2_mask_0070.bin, camd3.keys
*** MGcamd**
o Keys directory: /var/keys - SoftCam.Key, AutoRoll.Key, tps
o Program files: /var/bin - mgcamd
o Config files: /var/keys - mg_cfg
o AU files:
*** Xcamd**
o Keys directory: /var/keys - Keys.txt, AutoRoll.key
o Program files: /var/bin - xcamd
o Config files: /var/etc - xcamd.conf
o AU files: /var/roms/ - eeprom10.bin, eeprom11.bin, eeprom3.bin, eeprom7.bin, ram_10.bin, ram_11.bin, ram_3.bin, ram_7.bin, rom10.rom, rom11.rom, rom3.rom, rom7.rom
* **CCcam**
o Keys directory: /var/keys - SoftCam.Key, AutoRoll.key, constant.cw
o Program files: /var/bin - CCcam
o Config files: /var/etc - CCcam.cfg
o AU files: uknown
* **The latest CamX:**
o Keys directory: /var/keys - SoftCam.Key
o Program files: /var/bin - camx(ng) + server(ng)
o Config files: /var/etc - camx.config
o AU files: var/keys/ - AutoRoll.key
[[HomePage Back to the Wiki home page]]
==Here's a list of where to place what files for which emu on the DM500 ==
*** Newcamd**
o Keys directory: /var/tuxbox/scce -keylist, ppua, constancw, rsakeylist, tpscrypt (/var/scce for versions < 6.01)
o Program files: /var/bin - newcamd, cardserv, cardspider, betadserv
o Config files: /var/tuxbox/config/newcamd - newcamd.conf, cardserv.cfg, betad.cfg (/var/tuxbox/config for versions < 6.02)
o AU files: /var/tuxbox/scce/ - nagrarom3.bin, nagraram3.bin, nagraepr3.bin, sttestrom3.bin, stmaprom3.bin, nagrarom7.bin, nagraram7.bin, nagraepr7.bin, nagrarom10.bin, nagraram10.bin, nagraepr10.bin, nagrarom11.bin, nagraram11.bin, nagraepr11.bin, rsakeylist (/var/scce for versions < 6.01)
* **UCAS/SCAM**
o Keys directory: /var/keys - SoftCam.Key, seca2,nagra,via, irdeto,conax
o Program files: /var/bin - scam
o Config files: /var/keys - softcam.cfg
o AU files: /var/keys/ - seca2 /nagra_rom
*** CamX**
o Keys directory: /var/keys - SoftCam.Key
o Program files: /var/bin - camx server
o Config files: /var/etc - camx.config
o AU files: var/keys/ - AutoRoll.key
*** Evocamd**
o Keys directory: /var/keys - Autoupdate.Key & Keylist.txt
o Program files: /var/bin - evocamd
o Config files: /var/keys - camd_cfg
o AU files: /var/keys - Autoupdate.Key, /var/scce/ - nagraepr3.bin, nagraepr7.bin, nagraepr10.bin, nagraepr11.bin, nagraram3.bin, nagraram7.bin, nagraram10.bin, nagraram11.bin, nagrarom3ext.bin
* **Radegast**
o Keys directory: /var/keys - SoftCam.Key & AutoRoll.Key
o Program files: /var/bin - rdgd, camd.rdgd, netpilot
o Config files: /var/etc - radegast.cfg
o AU files: Need a patched driver for older conax cards
* **Camd3**
o Keys directory: /var/keys - camd3.keys
o Program files: /var/bin - camd3, pcamd
o Config files: /var/keys - camd3.conf, camd3.config, camd3.servers, camd3.users, pw_start.services, camd3.conf only needed for older camd3
o AU files: /var/keys/ - seca_hash.bin, seca2_hash_0070.bin, seca2_mask_0070.bin, camd3.keys
*** MGcamd**
o Keys directory: /var/keys - SoftCam.Key, AutoRoll.Key, tps
o Program files: /var/bin - mgcamd
o Config files: /var/keys - mg_cfg
o AU files:
*** Xcamd**
o Keys directory: /var/keys - Keys.txt, AutoRoll.key
o Program files: /var/bin - xcamd
o Config files: /var/etc - xcamd.conf
o AU files: /var/roms/ - eeprom10.bin, eeprom11.bin, eeprom3.bin, eeprom7.bin, ram_10.bin, ram_11.bin, ram_3.bin, ram_7.bin, rom10.rom, rom11.rom, rom3.rom, rom7.rom
* **CCcam**
o Keys directory: /var/keys - SoftCam.Key, AutoRoll.key, constant.cw
o Program files: /var/bin - CCcam
o Config files: /var/etc - CCcam.cfg
o AU files: uknown
* **The latest CamX:**
o Keys directory: /var/keys - SoftCam.Key
o Program files: /var/bin - camx(ng) + server(ng)
o Config files: /var/etc - camx.config
o AU files: var/keys/ - AutoRoll.key
[[HomePage Back to the Wiki home page]]
Deletions:
Additions:
- to be completed - holding page -
Additions:
[[GenericSetup Back 1 Page]] : [[HomePage Back to the PLi® Wiki Home Page]] : [[Generic Generic Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]]