E1SatRotor


Wiki source for E1SatRotor


Show raw source

====How to set up my moving dishes====
===={{color c="gray" text="Service Searching"}}====
//E1 Enigma 1 or E1 menus. [[E2Setup Click here]] for the E2 Menus//

//- to be completed -//

1. When we see this menu
2. Turn this menu on
3. Defining LNB / Bands to move to
5. Testing & setup

**First time use**

{{image alt="sat set up" title="sat set up" url="/images/wiki/000847_rotor_select_lnb.png"}}

Select the LNB you want to setup (C band / Ku band)

{{image alt="sat set up" title="sat set up" url="/images/wiki/000847_rotor_select_lnb1.png"}}

Now lets define the position of everything you have setup on your move dish

{{image alt="sat set up" title="sat set up" url="/images/wiki/000847_motor_setup.png"}}

Setup and tune in a satellite

{{image alt="sat set up" title="sat set up" url="/images/wiki/000847_motor_config.png"}}

==The menu options are as follows;==

- Mode: **position** - //Most used function.// Used to position and store the satellites you have defined in the [[E1Multi Satellite configuration]] menu
- Mode: **drive to stored position** - as it says, make you dish move to i.e. the satellite you have in the stored position 1 - and then press the GREEN button or select the GO button and press the OK button
- Mode: **drive to satellite** - like the option above, select the satellite and then press the GREEN button or select the GO button and press the OK button
- Mode: **Drive to 0degree** - to setup a motek motor
- Mode: **Recalculate:** for Motek and postioners that support this function
- Mode: **Set East limit** - use this function to stop your dish moving any further to the East with this software limit. Ideal if you have a bad actuator that tilts the dish over at the point of no return
- Mode: **Set West limit** - use this function to stop your dish moving any further to the West with this software limit. Ideal if you have a bad actuator that tilts the dish over at the point of no return
- Mode: **Disable limits:** Removes the EAST / WEST limits you may have set up
- Mode: **Enable limits:** Just **"do it"** if you want to enable limits

**Satellite:** Select a satellite that you defined in the [[E1Multi Satellite configuration]] section and move to it and store its position

**Transponder:** Select a [[E1SatEdit Transponder]] that you know has a signal on it

**Direction:** Use your left arrow and right arrow keys on your remote control to move the dish. When you do this the dish will move either to the East or the West and when the systems sees signal the transponder you have selected, the SNR & AGC will lock like the example above

**Store:** Store the current position of your dish.




----
[[E1Sat Back 1 page]] : [[HomePage Back to the PLiĀ® Wiki Home Page]] : [[E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]]
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki