E1RemoteAll


Revision [3571]

This is an old revision of E1RemoteAll made by fatmate on 2009-04-20 08:38:00.

 

The main remote controls we use today (there are others)


PLiRemotes

What difference do you see between these two remote?



Daily use ...

Changing Channels
Selecting the Channels Lists
Selecting bouquets
Changing the Volume
Recording

The Help button on all remote control units is your friend!
On the 7025 & 800 you have interactive help screens (not shown here)
Here is a list of the functions on your remote control.

help is here

help is here



Howto access the Video button with the small silver remote above prior to Jade2

The video menus give you access to the record button and several others as shown below.

1. From the TV screen press the OK button so you see the OSD popup like this example below

Remotes

2. Now press the Help button and the screen above will change to be like this;

Remotes

3. To get more help press the help button again and these screen will provide you with all the commands

Remotes

Remotes


Tip: For this tip above to work you need to have the correct remote control unit defined in the Hardware setup section


Howto access the Video button with the small silver remote with the Jade2 software

The video menus give you access to the record button and several others as shown below. But
before we can do this you have to select the remote control you have on your DM500. To do this
you have to ( The howto is here )
1. Press the menu | setup | hardware | remote control selections
2. select silver remote

PLi
3. Go to TV screen

4. From the TV screen press the OK button so you see the OSD popup like this example below

Remotes
5. Now press the Help button and the screen above will change to be like this;

Remotes
6. To get more help press the help button again and these screen will provide you with all the commands

Remotes

Remotes

The VIDEO controls will NOT appear until you select the correct remote control (Silver)

WARNING: By making this selection of the silver remote your WEBIF remote may not work correctly

Tip: For this tip above to work you need to have the correct remote control unit defined in the Hardware setup section


PLi
Tip: press the RED button to see the Electronic Programme Guide (EPG)
Tip: To assign new functions to your Yellow and Blue buttons, learn more about it here
Tip: The old blue button for softcams and downloads is still there but in a different layout click here to learn more
Tip: The old PPanels menu is now under the "yellow" button click here to learn more
Tip: a DM500+, DM600, DM7000, DM7020 remote will now work on your DM500 ..



Accessing the remote control function from your desktop


By Riad

Using the Windows operation system, I needed to send remote control
codes/presses via the LAN to control the Dreambox:

1. Download WGET for Windows and place it in C:\ (google is your friend)
2. Lunch a command prompt window (CMD) and type:
C:\wget.exe –quiet –delete-after http://ipofyourdmbox/cgi-bin/rc?X
(where ipofyourdmbox might = 192.168.1.3)

By replacing X with the correct code number,
the wget command will send a remote control
key press/code to the Dreambox. The flag –quite will make the
command silent, and –delete-after will make wget not write any files to C:\

Here is a list of remote command codes:


116=Power
2=1
3=2
4=3
5=4
6=5
7=6
8=7
9=8
10=9
158=previous
11=0
159=next
115=volume up
113=mute
402=bouquet up
114=volume down
1=lame
403=bouquet down
358=info
103=up
141=dream
105=left
352=OK
106=right
392=audio
108=down
393=video
398=red
399=green
400=yellow
401=blue
385=tv
377=radio
66=text
138=help

The above method can be used in many situations, but the way I use it
is with IR Server Suite to control my Dreambox from a different room using Media Center PC.


Support the PLi® team and get a cup of coffee.

PLi® Wiki HomePage : DM500 : DM500+ : DM56xx : DM600 :DM7000 : DM7020 : DM7025 : DM800 : DM8000
There are no comments on this page.
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki