Revision history for E1Multi
Additions:
{{color c="blue" text="You are here"}} [[HomePage | Home]]|[[E1Menu Main Menu]]|[[e1Setup Setup]]|[[E1sat Satellites and Transponder Menu]]|[[E1Multi Dish & LNB setup menu]]
Additions:
==={{color c="gray" text="Jade DM7020 users see note below please"}}===
**DM7020 Jade users** - If you have a move dish (diseqc 1.2 enabled) you have to do this manually for the first time setup in Jade or if you are in Europe you can use the [[henksatsettings The Henksat Settings files]]
**DM7020 Jade users** - If you have a move dish (diseqc 1.2 enabled) you have to do this manually for the first time setup in Jade or if you are in Europe you can use the [[henksatsettings The Henksat Settings files]]
Deletions:
**DM7020 Jade2 users** - If you have a move dish (diseqc 1.2 enabled) you have to do this manually for the first time setup in Jade2 or if you are in Europe you can use the [[henksatsettings The Henksat Settings files]]
Deletions:
Additions:
==={{color c="gray" text="Jade2 DM7020 users see note below please"}}===
**DM7020 Jade2 users** - If you have a move dish (diseqc 1.2 enabled) you have to do this manually for the first time setup in Jade2 or if you are in Europe you can use the [[henksatsettings The Henksat Settings files]]
**DM7020 Jade2 users** - If you have a move dish (diseqc 1.2 enabled) you have to do this manually for the first time setup in Jade2 or if you are in Europe you can use the [[henksatsettings The Henksat Settings files]]
Additions:
- **Tip:** European Users can always use the [[henksatsettings The Henksat Settings files]] - Automatic Satellite/Transponder setup and settings
Deletions:
Additions:
- **Tip** European Users can always use the [[henksatsettings The Henksat Settings files]] - Automatic Satellite/Transponder setup and settings
[[E1Sat Back 1 page]] : [[HomePage Back to the PLi® Wiki]] : [[E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]]
[[E1Sat Back 1 page]] : [[HomePage Back to the PLi® Wiki]] : [[E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[DM8000 DM8000]]
Deletions:
Additions:
- **Tip:** A multiswitch set up can take time to setup, so take the time with your setting and use it in conjunction with the [[E1Satfind Satfind]] option .... make sure these are set correctly Diseqc, 22hz, 13v or 18v etc
Deletions:
Additions:
**TIP:** To add a new satellite to this list you will need to edit your satellites.xml file. To do this [[E1SatEdit click on this link]] to see how you can do it with your remote control.
Deletions:
Additions:
{{image class alt="sat set up" title="sat set up" url="/images/wiki/000847_lnbuni.jpg"}}
Deletions:
Additions:
{{image class alt="sat set up" title="sat set up" url="/images/wiki/000847_mainmenu.jpg"}}
{{image alt="PLi" title="PLi" url="/images/wiki/000847_main_setup.jpg"}}
{{image class alt="sat set up" title="sat set up" url="/images/wiki/000847_satmain.jpg"}}
{{image class alt="sat set up" title="sat set up" url="/images/wiki/000847_typesat.png"}}
{{image class alt="sat set up" title="sat set up" url="/images/wiki/000847_lnb_usa.jpg"}}
{{image class alt="sat set up" title="sat set up" url="/images/wiki/000847_lnbsin.jpg"}}
{{image class alt="sat set up" title="sat set up" url="/images/wiki/000847_lnb.jpg"}}
{{image class alt="sat set up" title="sat set up" url="/images/wiki/000847_lnbsband.jpg"}}
{{image alt="PLi" title="PLi" url="/images/wiki/000847_main_setup.jpg"}}
{{image class alt="sat set up" title="sat set up" url="/images/wiki/000847_satmain.jpg"}}
{{image class alt="sat set up" title="sat set up" url="/images/wiki/000847_typesat.png"}}
{{image class alt="sat set up" title="sat set up" url="/images/wiki/000847_lnb_usa.jpg"}}
{{image class alt="sat set up" title="sat set up" url="/images/wiki/000847_lnbsin.jpg"}}
{{image class alt="sat set up" title="sat set up" url="/images/wiki/000847_lnb.jpg"}}
{{image class alt="sat set up" title="sat set up" url="/images/wiki/000847_lnbsband.jpg"}}
Deletions:
{{image alt="PLi" title="PLi" url="http://www.jsat.tv/pli/main_setup.jpg"}}
{{image class alt="sat set up" title="sat set up" url="http://www.jsat.tv/files/work/add/satmain.jpg"}}
{{image class alt="sat set up" title="sat set up" url="http://www.jsat.tv/pli/typesat.png"}}
{{image class alt="sat set up" title="sat set up" url="http://www.jsat.tv/pli/lnb_usa.jpg"}}
{{image class alt="sat set up" title="sat set up" url="http://www.jsat.tv/files/work/add/lnbsin.jpg"}}
{{image class alt="sat set up" title="sat set up" url="http://www.jsat.tv/files/work/add/lnb.jpg"}}
{{image class alt="sat set up" title="sat set up" url="http://www.jsat.tv/files/work/add/lnbsband.jpg"}}
Additions:
//[[E2Sat E2 - DM7025/DM800 users click here]]//
- **Tip:** A multiswitch set up can take time to setup, so take the time with your setting and use it in conjunction with the [[E1Satfind Satfind]] option .... make sure these are set correctly Diqeqc, 22hz, 13v or 18v etc
- **A flash movie** showing a Motek (HH 1.2m Ku band move dish) in action is here [[http://www.jsat.tv/nz/Moteks/index.htm Motek move flash movie]]
[[E1Sat Back 1 page]] : [[HomePage Back to the PLi® Wiki]] : [[E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[TextSearch Search]]
- **Tip:** A multiswitch set up can take time to setup, so take the time with your setting and use it in conjunction with the [[E1Satfind Satfind]] option .... make sure these are set correctly Diqeqc, 22hz, 13v or 18v etc
- **A flash movie** showing a Motek (HH 1.2m Ku band move dish) in action is here [[http://www.jsat.tv/nz/Moteks/index.htm Motek move flash movie]]
[[E1Sat Back 1 page]] : [[HomePage Back to the PLi® Wiki]] : [[E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[TextSearch Search]]
Deletions:
- **Tip:** A multiswitch set up can take time to setup, so take the time with your setting and use it in conjunction with the [[GenericSatfind Satfind]] option .... make sure these are set correctly Diqeqc, 22hz, 13v or 18v etc
- **A flash movie** showing a Motek (1.2m Ku band move dish) in action is here [[http://www.jsat.tv/nz/Moteks/index.htm Motek move flash movie]]
[[E1Sat Back 1 page]] : [[HomePage Back to the PLi® Wiki]] : [[E1 E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[TextSearch Search]]
Additions:
[[E1Sat Back 1 page]] : [[HomePage Back to the PLi® Wiki]] : [[E1 E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[TextSearch Search]]
Deletions:
Additions:
[[GenericSat Back 1 page]] : [[HomePage Back to the PLi® Wiki]] : [[E1 E1 E1 Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[TextSearch Search]]
Deletions:
Additions:
===={{color c="gray" text="Service Searching"}}====
Deletions:
Additions:
==Service Searching==
Additions:
//[[DM800Sat E2 - DM7025/DM800 users click here]]//
For non-standard setups. The PLi setup allows you to define just about any satellite solution.
For non-standard setups. The PLi setup allows you to define just about any satellite solution.
Deletions:
Additions:
//Generic Enigma 1 or E1 menus. [[DM800Sat Click here]] for the E2 Generic Menus//
Deletions:
Additions:
[[GenericSat Back 1 page]] : [[HomePage Back to the PLi® Wiki]] : [[Generic E1 Generic Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] : [[TextSearch Search]]
Deletions:
Additions:
//Generic Enigma 1 or E1 menus. [[DM800Setup Click here]] for the E2 Generic Menus//
Additions:
- **Tip:** For a move dish i.e a Motek or Superjack dish mover to be enable you need to select the diseqc 1.2 in the LNB settings > blue button option above
- **Tip:** If a satellite you know works on another type of set top box and does NOT on your DM box, then it is a settings issue 99% of the time, so check the LNB LO details are the same as shown in some of the examples above, check the diseqc settings are correct
- **Tip:** If a satellite you know works on another type of set top box and does NOT on your DM box, then it is a settings issue 99% of the time, so check the LNB LO details are the same as shown in some of the examples above, check the diseqc settings are correct
Deletions:
- **Tip:** If a satellite you know works on another type of set top box, check the LNB LO details are the same as shown in some of the examples above, check the diseqc settings are correct
Additions:
- **Tip:** For a move dish i.e a Motek or Superjack dish mover to be enable you need to select the diseqc 1.2 on the [[GenericMulti Satellite configuration]] section
Deletions:
Additions:
Here are hints and tips to try and make your life easier.
- **Tip:** For a move dish i.e a Motek or Superjack dish mover to be enable you need to select the diseqc 1.2 on the
- **Tip:** If a satellite you know works on another type of set top box, check the LNB LO details are the same as shown in some of the examples above, check the diseqc settings are correct
- **Tip:** A multiswitch set up can take time to setup, so take the time with your setting and use it in conjunction with the [[GenericSatfind Satfind]] option .... make sure these are set correctly Diqeqc, 22hz, 13v or 18v etc
- **A flash movie** showing a Motek (1.2m Ku band move dish) in action is here [[http://www.jsat.tv/nz/Moteks/index.htm Motek move flash movie]]
- **Tip:** For a move dish i.e a Motek or Superjack dish mover to be enable you need to select the diseqc 1.2 on the
- **Tip:** If a satellite you know works on another type of set top box, check the LNB LO details are the same as shown in some of the examples above, check the diseqc settings are correct
- **Tip:** A multiswitch set up can take time to setup, so take the time with your setting and use it in conjunction with the [[GenericSatfind Satfind]] option .... make sure these are set correctly Diqeqc, 22hz, 13v or 18v etc
- **A flash movie** showing a Motek (1.2m Ku band move dish) in action is here [[http://www.jsat.tv/nz/Moteks/index.htm Motek move flash movie]]
Deletions:
** to be completed **
Additions:
[[GenericSat Back 1 page]] : [[HomePage Back to the PLi® Wiki Home Page]] : [[Generic Generic Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]]
Deletions:
Additions:
[[GenericSetup Back 1 page]] : [[HomePage Back to the PLi® Wiki Home Page]] : [[Generic Generic Howtos]] : [[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]]
Deletions:
Additions:
This page will allow you to
**[1]** Set up your dish (fixed or move)
**[2]** LNB type
**[3]** diseqc type
**[4]** add new satellites to the list
**[5]** delete satellites from the list
**[6]** set up a multiswitch device
- Satellites.xml section / link to be added
**[1]** Set up your dish (fixed or move)
**[2]** LNB type
**[3]** diseqc type
**[4]** add new satellites to the list
**[5]** delete satellites from the list
**[6]** set up a multiswitch device
- Satellites.xml section / link to be added
Deletions:
**[5]** delete satellites from the list **[6]** set up a multiswitch device **[7]** set up all your diseqc settings for move dishes with single or multiple LNB's and a few other things besides.
Additions:
{{image class alt="sat set up" title="sat set up" url="http://www.jsat.tv/pli/typesat.png"}}
Deletions:
Additions:
**USA standard Circular Universal LNB**
{{image class alt="sat set up" title="sat set up" url="http://www.jsat.tv/pli/lnb_usa.jpg"}}
{{image class alt="sat set up" title="sat set up" url="http://www.jsat.tv/pli/lnb_usa.jpg"}}
Additions:
** to be completed **
Additions:
=====Howto setup a dish and LNB on your DM box=====
**1.** Press the **Menu** button on your remote control
**2.** Highlight **Setup** and press the //OK// button and then select **Satellites and Transponders** and press the //OK// button
**3.** Now select **Satellite Configuration** and press the **OK** button
Right now we have just arrived at the main satellite setup page, where you can set up just about any satellite configuration you can think of (also works with marine and mobile gyrosync-dishes very well - tried and tested). When I say anything is possible, I really mean it. I use on one system here a 12 way multiswitch, with 12 different satellites and LNB combinations on it. On another system here I have a 3.2m moving C and Ku band dish tuned to 32 different satellites. On yet another system I use a simple Motek Ku band moving dish over 12 Ku Band and 1 S band satellites. So as you can see it is not that your DM system will not do something, it is just a matter of time and effort to get it working the way it should.
====The basic setup of your system will vary depending on;====
1) How many dishes you have
1) What satellite band you are using (different setting for different parts of the world)
1) How the dishes and LNB's are set up with or without diseqc switches
1) If your dish is a move dish it will differ from a fixed dish setup
1) If you are using a multiswitch or not using one
1) If you are using a 22hz switch to select various diseqc's
**[5]** delete satellites from the list **[6]** set up a multiswitch device **[7]** set up all your diseqc settings for move dishes with single or multiple LNB's and a few other things besides.
Standard **Universal LNB** setup (PLi® default setting) for all countries **but** North America
[[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] :: [[Generic Generic all boxes]]
**1.** Press the **Menu** button on your remote control
**2.** Highlight **Setup** and press the //OK// button and then select **Satellites and Transponders** and press the //OK// button
**3.** Now select **Satellite Configuration** and press the **OK** button
Right now we have just arrived at the main satellite setup page, where you can set up just about any satellite configuration you can think of (also works with marine and mobile gyrosync-dishes very well - tried and tested). When I say anything is possible, I really mean it. I use on one system here a 12 way multiswitch, with 12 different satellites and LNB combinations on it. On another system here I have a 3.2m moving C and Ku band dish tuned to 32 different satellites. On yet another system I use a simple Motek Ku band moving dish over 12 Ku Band and 1 S band satellites. So as you can see it is not that your DM system will not do something, it is just a matter of time and effort to get it working the way it should.
====The basic setup of your system will vary depending on;====
1) How many dishes you have
1) What satellite band you are using (different setting for different parts of the world)
1) How the dishes and LNB's are set up with or without diseqc switches
1) If your dish is a move dish it will differ from a fixed dish setup
1) If you are using a multiswitch or not using one
1) If you are using a 22hz switch to select various diseqc's
**[5]** delete satellites from the list **[6]** set up a multiswitch device **[7]** set up all your diseqc settings for move dishes with single or multiple LNB's and a few other things besides.
Standard **Universal LNB** setup (PLi® default setting) for all countries **but** North America
[[DM500 DM500]] : [[DM500plus DM500+]] : [[DM56xx DM56xx]] : [[DM600 DM600]] : [[DM7000 DM7000]] : [[DM7020 DM7020]] : [[DM7025 DM7025]] : [[DM800 DM800]] :: [[Generic Generic all boxes]]
Deletions:
1. Press **Menu** on your remote control
2. Select **Setup** and press the //OK// button and then select **Satellites and Transponders** and press the //OK// button
3. Now select **Satellite Configuration** and press the **OK** button
Right now we have arrived at the main satellite setup page, where you can set up just about any satellite configuration you can think of (also works with marine and mobile gyro-dishes very well).
====The setup of this page will vary depending on;====
**a.** How many dishes you have
**b.** How the dishes/LNB are set up with or without diseqc switches
**c.** If your dish is a move dish it will differ from a fixed dish setup
**d.** If you are using a multiswitch or not
**e.** If you are using a 22hz switch to select various diseqc's
**[5]** delete satellites from the list **[6]** set up a multiswitch device [7] set up all your diseqc settings for move dishes with single or multiple LNB's and a few other things besides.
Standard **Universal LNB** setup (PLi® default setting)