E1Multi


You are here Home|Main Menu|Setup|Satellites and Transponder Menu|Dish & LNB setup menu

Howto setup a dish and LNB on your DM box

Service Searching

E2 - DM7025/DM800 users click here


For non-standard setups. The PLi setup allows you to define just about any satellite solution.

Jade DM7020 users see note below please


1. Press the Menu button on your remote control

sat set up

2. Highlight Setup and press the OK button and then select Satellites and Transponders and press the OK button

PLi

3. Now select Satellite Configuration and press the OK button

sat set up

Right now we have just arrived at the main satellite setup page, where you can set up just about any satellite configuration you can think of (also works with marine and mobile gyrosync-dishes very well - tried and tested). When I say anything is possible, I really mean it. I use on one system here a 12 way multiswitch, with 12 different satellites and LNB combinations on it. On another system here I have a 3.2m moving C and Ku band dish tuned to 32 different satellites. On yet another system I use a simple Motek Ku band moving dish over 12 Ku Band and 1 S band satellites. So as you can see it is not that your DM system will not do something, it is just a matter of time and effort to get it working the way it should.



The basic setup of your system will vary depending on;

  1. How many dishes you have
  2. What satellite band you are using (different setting for different parts of the world)
  3. How the dishes and LNB's are set up with or without diseqc switches
  4. If your dish is a move dish it will differ from a fixed dish setup
  5. If you are using a multiswitch or not using one
  6. If you are using a 22hz switch to select various diseqc's

sat set up

This page will allow you to
[1] Set up your dish (fixed or move)
[2] LNB type
[3] diseqc type
[4] add new satellites to the list
[5] delete satellites from the list
[6] set up a multiswitch device


TIP: To add a new satellite to this list you will need to edit your satellites.xml file. To do this click on this link to see how you can do it with your remote control.




Standard LNB settings (although can vary from country to country)


Standard Universal LNB setup (PLiĀ® default setting) for all countries but North America

sat set up

USA standard Circular Universal LNB

sat set up

Ku Single LNB (there is NO such thing as a standard Ku single LNB as this is different in many countries i.e. 10700 in Australia)

sat set up

Standard C Band LNB setup

sat set up

Standard S Band LNB setting

sat set up


Here are hints and tips to try and make your life easier.


DM7020 Jade users - If you have a move dish (diseqc 1.2 enabled) you have to do this manually for the first time setup in Jade or if you are in Europe you can use the The Henksat Settings files


Back 1 page : Back to the PLiĀ® Wiki : E1 Howtos : DM500 : DM500+ : DM56xx : DM600 : DM7000 : DM7020 : DM7025 : DM800 : DM8000
There are no comments on this page.
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki