E1Mount


Revision [247]

This is an old revision of E1Mount made by jonc on 2008-05-29 20:37:42.

 

Howto mount a LAN based hard disk to my DM box


This can be done in two ways
  1. Via the DM box itself with your remote control under Menu>Setup>System Settings >Network Mounts
  2. Via the web interface (webif) which we will show below (easy way of doing it)

A example of the end result using the remote control and the PLiĀ® menus in the latest image
PLi

A example of the end result using the web interface in the latest PLiĀ® image
PLi

Requirements
Assumptions
You know how to share a directory on your hard disk on your computer (the F1 key on most operating systems will provide HELP on how to do that) to the local area network

Howto add a shared directory to your DM box using the web interface (webif)

1. Open your web browser to the IP address of your DM box. In this example we us the IP address of 192.168.1.201

PLi

2. Now click on the drop down menu called Box control, then Click on the option called "configuration"

PLi

3. Click on the option called "Mount Manager". You will note this menu is empty the first time you use it as shown below.

PLi

4. Now Click on the Green button to 'add' a new mount to you DM box.

PLi

Now this is where we get busy.

Description: The name you want to call the share you are setting up
Filesystem Type: in most cases it will always be '1' CIFS
Automount: Check this option if you always want this share to start when your DM box starts
Client Directory: this is where you put the mount on your DM box. Look in the /media directory on your DM box for examples
Server Directory: this is the name of the shared directory on your other DM box or computer
Remote Host IP/Name: Try to always use a fixed IP address here, and this is the IP address of your shared directory
User Name: if you have one on your shared directory
Password: if you have one on your shared directory
Options: This is to make the shared connection work smoothly on LAN. The default settings shown work well in most cases

5. Once you have entered all the details click on the save button and you should see this screen.

PLi

Now on some boxes you may need to click on the "mount" button if there is no tick. In some of the older boxes a restart is required for the tick to appear. Try both options.

The example above shows;
A DM600 mounted to a DM500
A DM7020 mounted to a DM500
A Windows Vista PC directory (in this the movies folder in My Media Center) mounted to a DM500.

Now take note of where they are mounted to.
The first share to /media/hdd (on all boxes without a hard disk installed in it)
The second share on /media/server1 (DM boxes with on board HDD's should start here not /media/hdd)
The third share on /media/server2 and so on.
For a full list of where to put your shares look in the /media directory on your DM box.


Howto add a shared directory to your DM box using the remote control

With your remote control press the menu button and this screen will appear

PLi

Now select the setup option and press the OK button

PLi

Now select the System Setting option with your remote and then press the OK button

PLi

Now use your arrow keys to select the Mount option and press your OK button

PLi


* to be continued *


Back to
Generic Howtos : DM500 : DM500+ : DM56xx : DM600 : DM7000 : DM7020 : DM7025 : DM800
There are no comments on this page.
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki