Revision history for DM600install
No Differences
Additions:
[[http://www.dream-multimedia-tv.de/dm800/eng_browser.php The official Dream Multimedia via a web browser (same as the DM800)]]
Deletions:
Revision [3766]
Edited on 2009-10-13 04:56:41 by jonc [link removed due to userid/password required]Additions:
[[http://www.dream-multimedia-tv.de/dm800/eng_browser.php The official Dream Multimedia via a web browser (same as the DM800)]
Deletions:
---
[[http://www.i-have-a-dreambox.com/wbb2/attachment.php?attachmentid=42563 Simple VSFA - 600pvr_500plus tool (without RS232 cable and without using power button)]]
Additions:
---
[[http://www.i-have-a-dreambox.com/wbb2/attachment.php?attachmentid=42563 Simple VSFA - 600pvr_500plus tool (without RS232 cable and without using power button)]]
[[http://www.i-have-a-dreambox.com/wbb2/attachment.php?attachmentid=42563 Simple VSFA - 600pvr_500plus tool (without RS232 cable and without using power button)]]
Additions:
d. The latest PLi® software image - click here to down load it - [[http://www.pli-images.org/downloads.php?cat_id=11 Download our latest image for the DM600]]
Deletions:
Additions:
[[http://www.pli-images.org/downloads.php?cat_id=11&download_id=60 Download the Jade final for the DM600]]
Deletions:
Deletions:
===={{color c="gray" text="two other methods of flashing your DM500+"}}====
===Stop Mode HTTP Image Install===
In stop mode, the boot loader tries to get an IP address using DHCP. Make sure you have a DHCP server in your local network, or you will not be able to flash over the network.
Since a DM500+ does not have a display, and lacks the arrow buttons, the stop mode is approached differently.
Stop Mode may be entered into by 2 different methods,
- The first is simply using telnet commands
- the second by activating "[[E1SystemUp Software Update]]" in the [[E1Setup Setup]] menu.
**Important !!!**
//Please be advised that your box will not come out of this stop mode mode once you put it in stop mode.//
//You **must** to flash your box now in order to get it up and running again.//
===The Telnet Method===
Telnet into your box and run the following commands from shell.
telnet xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is your DM500+ [[E1SystemNetwork IP address]])
mount /boot -o remount,rw (re-mount the /boot directory with read & write permissions)
rm /boot/* (delete the contents of the /boot directory)
reboot (reboots the box into Stop Mode)
===The Software Update Menu Method===
With your remote control, navigate to the Software Update dialog ([[E2PluginsSoft Software Update - overview here]]).
1) Select "//Prepare box for new image//"
1) answer "//Yes//" in the following dialog, confirming you which to put the box into Stop Mode.
1) The box will reboot into Stop Mode.
===Flashing The New Image===
Open your web browser and enter your box [[E2Network IP address]] in the [[Webif address bar]] to go to the flash interface.
Towards the bottom left you'll see a link named "//Flash new firmware//", click on it.
{{image alt="DM500+" title="DM500+" url="/images/wiki/000847_4809086-353.jpg"}}
The next page will open, allowing you to browse for the image you wish to flash, select your *.nfi file of choice
(make sure the image is unzipped and ends with the .nfi suffix). After selecting the desired image,
simply click on the Flash button, the desired image will be uploaded and flashed to your DM500+.
{{image alt="DM500+" title="DM500+" url="/images/wiki/000847_4809089-7d3.jpg"}}
When Flashing is completed your box will reboot, allowing you to configure ([[DM500plus see options 2-5 on this screen]]) and use your new image.
Additions:
===The first Howto below will follow the Windows based dreamUP install===
//Please be advised that your box will not come out of this stop mode mode once you put it in stop mode.//
//You **must** to flash your box now in order to get it up and running again.//
Telnet into your box and run the following commands from shell.
reboot (reboots the box into Stop Mode)
With your remote control, navigate to the Software Update dialog ([[E2PluginsSoft Software Update - overview here]]).
1) answer "//Yes//" in the following dialog, confirming you which to put the box into Stop Mode.
1) The box will reboot into Stop Mode.
//Please be advised that your box will not come out of this stop mode mode once you put it in stop mode.//
//You **must** to flash your box now in order to get it up and running again.//
Telnet into your box and run the following commands from shell.
reboot (reboots the box into Stop Mode)
With your remote control, navigate to the Software Update dialog ([[E2PluginsSoft Software Update - overview here]]).
1) answer "//Yes//" in the following dialog, confirming you which to put the box into Stop Mode.
1) The box will reboot into Stop Mode.
Deletions:
//Please be advised that your DM500+ will not come out of this stop mode mode once you put it in stop mode.//
//You **must** to flash your DM500+ now in order to get it up and running again.//
Telnet into your DM500+ and run the following commands from shell.
reboot (reboots the DM500+ into Stop Mode)
With your remote control, navigate to the Software Update dialog ([[E1SystemUp Software Update - overview here]]).
1) answer "//Yes//" in the following dialog, confirming you which to put the DM500+ into Stop Mode.
1) The DM500+ will reboot into Stop Mode.
Additions:
====The second howto Flash via the http method====
===={{color c="gray" text="two other methods of flashing your DM500+"}}====
===Stop Mode HTTP Image Install===
In stop mode, the boot loader tries to get an IP address using DHCP. Make sure you have a DHCP server in your local network, or you will not be able to flash over the network.
Since a DM500+ does not have a display, and lacks the arrow buttons, the stop mode is approached differently.
Stop Mode may be entered into by 2 different methods,
- The first is simply using telnet commands
- the second by activating "[[E1SystemUp Software Update]]" in the [[E1Setup Setup]] menu.
**Important !!!**
//Please be advised that your DM500+ will not come out of this stop mode mode once you put it in stop mode.//
//You **must** to flash your DM500+ now in order to get it up and running again.//
===The Telnet Method===
Telnet into your DM500+ and run the following commands from shell.
telnet xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is your DM500+ [[E1SystemNetwork IP address]])
mount /boot -o remount,rw (re-mount the /boot directory with read & write permissions)
rm /boot/* (delete the contents of the /boot directory)
reboot (reboots the DM500+ into Stop Mode)
===The Software Update Menu Method===
With your remote control, navigate to the Software Update dialog ([[E1SystemUp Software Update - overview here]]).
1) Select "//Prepare box for new image//"
1) answer "//Yes//" in the following dialog, confirming you which to put the DM500+ into Stop Mode.
1) The DM500+ will reboot into Stop Mode.
===Flashing The New Image===
Open your web browser and enter your box [[E2Network IP address]] in the [[Webif address bar]] to go to the flash interface.
Towards the bottom left you'll see a link named "//Flash new firmware//", click on it.
{{image alt="DM500+" title="DM500+" url="/images/wiki/000847_4809086-353.jpg"}}
The next page will open, allowing you to browse for the image you wish to flash, select your *.nfi file of choice
(make sure the image is unzipped and ends with the .nfi suffix). After selecting the desired image,
simply click on the Flash button, the desired image will be uploaded and flashed to your DM500+.
{{image alt="DM500+" title="DM500+" url="/images/wiki/000847_4809089-7d3.jpg"}}
When Flashing is completed your box will reboot, allowing you to configure ([[DM500plus see options 2-5 on this screen]]) and use your new image.
===={{color c="gray" text="two other methods of flashing your DM500+"}}====
===Stop Mode HTTP Image Install===
In stop mode, the boot loader tries to get an IP address using DHCP. Make sure you have a DHCP server in your local network, or you will not be able to flash over the network.
Since a DM500+ does not have a display, and lacks the arrow buttons, the stop mode is approached differently.
Stop Mode may be entered into by 2 different methods,
- The first is simply using telnet commands
- the second by activating "[[E1SystemUp Software Update]]" in the [[E1Setup Setup]] menu.
**Important !!!**
//Please be advised that your DM500+ will not come out of this stop mode mode once you put it in stop mode.//
//You **must** to flash your DM500+ now in order to get it up and running again.//
===The Telnet Method===
Telnet into your DM500+ and run the following commands from shell.
telnet xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is your DM500+ [[E1SystemNetwork IP address]])
mount /boot -o remount,rw (re-mount the /boot directory with read & write permissions)
rm /boot/* (delete the contents of the /boot directory)
reboot (reboots the DM500+ into Stop Mode)
===The Software Update Menu Method===
With your remote control, navigate to the Software Update dialog ([[E1SystemUp Software Update - overview here]]).
1) Select "//Prepare box for new image//"
1) answer "//Yes//" in the following dialog, confirming you which to put the DM500+ into Stop Mode.
1) The DM500+ will reboot into Stop Mode.
===Flashing The New Image===
Open your web browser and enter your box [[E2Network IP address]] in the [[Webif address bar]] to go to the flash interface.
Towards the bottom left you'll see a link named "//Flash new firmware//", click on it.
{{image alt="DM500+" title="DM500+" url="/images/wiki/000847_4809086-353.jpg"}}
The next page will open, allowing you to browse for the image you wish to flash, select your *.nfi file of choice
(make sure the image is unzipped and ends with the .nfi suffix). After selecting the desired image,
simply click on the Flash button, the desired image will be uploaded and flashed to your DM500+.
{{image alt="DM500+" title="DM500+" url="/images/wiki/000847_4809089-7d3.jpg"}}
When Flashing is completed your box will reboot, allowing you to configure ([[DM500plus see options 2-5 on this screen]]) and use your new image.
Deletions:
Additions:
[[DM600 Back 1 page]] : [[HomePage PLi® Wiki HomePage]]
Deletions:
Additions:
d. The latest PLi® software image - click here to down load it - [[http://www.pli-images.org/downloads.php?cat_id=8 Download our latest image for the DM600]]
Deletions:
Additions:
-Jade link to be added -
No Differences
Additions:
**The first Howto below will follow the Windows based dreamUP install**
[[http://www.dream-multimedia-tv.de/dm500/ How to use dreamUP - Dream Multimedia offical version]] Same as the Dm500
----
**The second Howto Flash via the http method**
[[http://www.dream-multimedia-tv.de/dm800/eng_browser.php The official Dream Multimedia via a web browser (same as the DM800)]]
[[http://www.dream-multimedia-tv.de/dm500/ How to use dreamUP - Dream Multimedia offical version]] Same as the Dm500
----
**The second Howto Flash via the http method**
[[http://www.dream-multimedia-tv.de/dm800/eng_browser.php The official Dream Multimedia via a web browser (same as the DM800)]]
Deletions:
Additions:
[[DM600 Back]] | [[HomePage PLi® Wiki HomePage]]
Additions:
//Please note :// there are two (2) very different ways of flashing your DM600. This Howto below will follow the Windows based dreamUP version;